linux-kernel - [PATCH 05/10] dt-bindings: gpio: Add gpio nodes for Actions S900 SoC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180217204433.3095-6-manivannan.sadhasivam@linaro.org>
Date:   Sun, 18 Feb 2018 02:14:28 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     linus.walleij@...aro.org, robh+dt@...nel.org, afaerber@...e.de
Cc:     liuwei@...ions-semi.com, mp-cs@...ions-semi.com,
        96boards@...obotics.com, devicetree@...r.kernel.org,
        daniel.thompson@...aro.org, amit.kucheria@...aro.org,
        linux-arm-kernel@...ts.infradead.org, linux-gpio@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH 05/10] dt-bindings: gpio: Add gpio nodes for Actions S900 SoC

Add gpio nodes for Actions Semi S900 SoC.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
 .../devicetree/bindings/gpio/actions,owl-gpio.txt         | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/actions,owl-gpio.txt

diff --git a/Documentation/devicetree/bindings/gpio/actions,owl-gpio.txt b/Documentation/devicetree/bindings/gpio/actions,owl-gpio.txt
new file mode 100644
index 000000000000..4cd4cb7bfd1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/actions,owl-gpio.txt
@@ -0,0 +1,15 @@
+* Actions Semi OWL GPIO controller bindings
+
+- compatible      : Should be "actions,s900-gpio"
+- reg             : Address and range of the GPIO controller registers.
+- gpio-controller : Marks the device node as a GPIO controller.
+- #gpio-cells     : Should be <2>. The first cell is the gpio number and
+                    the second cell is used to specify optional parameters.
+
+Example:
+       gpio: gpio@...b0000 {
+               compatible = "actions,s900-gpio";
+               reg = <0x0 0xe01b0000 0x0 0x1000>;
+               gpio-controller;
+               #gpio-cells = <2>;
+       };
-- 
2.14.1