| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1519059584-30844-8-git-send-email-jacopo+renesas@jmondi.org>
Date: Mon, 19 Feb 2018 17:59:40 +0100
From: Jacopo Mondi <jacopo+renesas@...ndi.org>
To: laurent.pinchart@...asonboard.com, magnus.damm@...il.com,
geert@...der.be, hverkuil@...all.nl, mchehab@...nel.org,
festevam@...il.com, sakari.ailus@....fi, robh+dt@...nel.org,
mark.rutland@....com, pombredanne@...b.com
Cc: Jacopo Mondi <jacopo+renesas@...ndi.org>,
linux-renesas-soc@...r.kernel.org, linux-media@...r.kernel.org,
linux-sh@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v9 07/11] media: i2c: ov772x: Support frame interval handling
Add support to ov772x driver for frame intervals handling and enumeration.
Tested with 10MHz and 24MHz input clock at VGA and QVGA resolutions for
10, 15 and 30 frame per second rates.
Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
---
drivers/media/i2c/ov772x.c | 212 +++++++++++++++++++++++++++++++++++++++++----
1 file changed, 195 insertions(+), 17 deletions(-)
diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 23106d7..eba71d9 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -250,6 +250,7 @@
#define AEC_1p2 0x10 /* 01: 1/2 window */
#define AEC_1p4 0x20 /* 10: 1/4 window */
#define AEC_2p3 0x30 /* 11: Low 2/3 window */
+#define COM4_RESERVED 0x01 /* Reserved bit */
/* COM5 */
#define AFR_ON_OFF 0x80 /* Auto frame rate control ON/OFF selection */
@@ -267,6 +268,10 @@
/* AEC max step control */
#define AEC_NO_LIMIT 0x01 /* 0 : AEC incease step has limit */
/* 1 : No limit to AEC increase step */
+/* CLKRC */
+ /* Input clock divider register */
+#define CLKRC_RESERVED 0x80 /* Reserved bit */
+#define CLKRC_DIV(n) ((n) - 1)
/* COM7 */
/* SCCB Register Reset */
@@ -373,6 +378,19 @@
#define VERSION(pid, ver) ((pid<<8)|(ver&0xFF))
/*
+ * PLL multipliers
+ */
+struct {
+ unsigned int mult;
+ u8 com4;
+} ov772x_pll[] = {
+ { 1, PLL_BYPASS, },
+ { 4, PLL_4x, },
+ { 6, PLL_6x, },
+ { 8, PLL_8x, },
+};
+
+/*
* struct
*/
@@ -388,6 +406,7 @@ struct ov772x_color_format {
struct ov772x_win_size {
char *name;
unsigned char com7_bit;
+ unsigned int sizeimage;
struct v4l2_rect rect;
};
@@ -404,6 +423,7 @@ struct ov772x_priv {
unsigned short flag_hflip:1;
/* band_filter = COM8[5] ? 256 - BDBASE : 0 */
unsigned short band_filter;
+ unsigned int fps;
};
/*
@@ -487,27 +507,35 @@ static const struct ov772x_color_format ov772x_cfmts[] = {
static const struct ov772x_win_size ov772x_win_sizes[] = {
{
- .name = "VGA",
- .com7_bit = SLCT_VGA,
+ .name = "VGA",
+ .com7_bit = SLCT_VGA,
+ .sizeimage = 510 * 748,
.rect = {
- .left = 140,
- .top = 14,
- .width = VGA_WIDTH,
- .height = VGA_HEIGHT,
+ .left = 140,
+ .top = 14,
+ .width = VGA_WIDTH,
+ .height = VGA_HEIGHT,
},
}, {
- .name = "QVGA",
- .com7_bit = SLCT_QVGA,
+ .name = "QVGA",
+ .com7_bit = SLCT_QVGA,
+ .sizeimage = 278 * 576,
.rect = {
- .left = 252,
- .top = 6,
- .width = QVGA_WIDTH,
- .height = QVGA_HEIGHT,
+ .left = 252,
+ .top = 6,
+ .width = QVGA_WIDTH,
+ .height = QVGA_HEIGHT,
},
},
};
/*
+ * frame rate settings lists
+ */
+unsigned int ov772x_frame_intervals[] = { 5, 10, 15, 20, 30, 60 };
+#define OV772X_N_FRAME_INTERVALS ARRAY_SIZE(ov772x_frame_intervals)
+
+/*
* general function
*/
@@ -574,6 +602,126 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int enable)
return 0;
}
+static int ov772x_set_frame_rate(struct ov772x_priv *priv,
+ struct v4l2_fract *tpf,
+ const struct ov772x_color_format *cfmt,
+ const struct ov772x_win_size *win)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ unsigned long fin = clk_get_rate(priv->clk);
+ unsigned int fps = tpf->numerator ?
+ tpf->denominator / tpf->numerator :
+ tpf->denominator;
+ unsigned int best_diff;
+ unsigned int fsize;
+ unsigned int pclk;
+ unsigned int diff;
+ unsigned int idx;
+ unsigned int i;
+ u8 clkrc = 0;
+ u8 com4 = 0;
+ int ret;
+
+ /* Approximate to the closest supported frame interval. */
+ best_diff = ~0L;
+ for (i = 0, idx = 0; i < OV772X_N_FRAME_INTERVALS; i++) {
+ diff = abs(fps - ov772x_frame_intervals[i]);
+ if (diff < best_diff) {
+ idx = i;
+ best_diff = diff;
+ }
+ }
+ fps = ov772x_frame_intervals[idx];
+
+ /* Use image size (with blankings) to calculate desired pixel clock. */
+ if ((cfmt->com7 & OFMT_MASK) == OFMT_RGB ||
+ (cfmt->com7 & OFMT_MASK) == OFMT_YUV)
+ fsize = win->sizeimage * 2;
+ else if ((cfmt->com7 & OFMT_MASK) == OFMT_BRAW)
+ fsize = win->sizeimage;
+
+ pclk = fps * fsize;
+
+ /*
+ * Pixel clock generation circuit is pretty simple:
+ *
+ * Fin -> [ / CLKRC_div] -> [ * PLL_mult] -> pclk
+ *
+ * Try to approximate the desired pixel clock testing all available
+ * PLL multipliers (1x, 4x, 6x, 8x) and calculate corresponding
+ * divisor with:
+ *
+ * div = PLL_mult * Fin / pclk
+ *
+ * and re-calculate the pixel clock using it:
+ *
+ * pclk = Fin * PLL_mult / CLKRC_div
+ *
+ * Choose the PLL_mult and CLKRC_div pair that gives a pixel clock
+ * closer to the desired one.
+ *
+ * The desired pixel clock is calculated using a known frame size
+ * (blanking included) and FPS.
+ */
+ best_diff = ~0L;
+ for (i = 0; i < ARRAY_SIZE(ov772x_pll); i++) {
+ unsigned int pll_mult = ov772x_pll[i].mult;
+ unsigned int pll_out = pll_mult * fin;
+ unsigned int t_pclk;
+ unsigned int div;
+
+ if (pll_out < pclk)
+ continue;
+
+ div = DIV_ROUND_CLOSEST(pll_out, pclk);
+ t_pclk = DIV_ROUND_CLOSEST(fin * pll_mult, div);
+ diff = abs(pclk - t_pclk);
+ if (diff < best_diff) {
+ best_diff = diff;
+ clkrc = CLKRC_DIV(div);
+ com4 = ov772x_pll[i].com4;
+ }
+ }
+
+ ret = ov772x_write(client, COM4, com4 | COM4_RESERVED);
+ if (ret < 0)
+ return ret;
+
+ ret = ov772x_write(client, CLKRC, clkrc | CLKRC_RESERVED);
+ if (ret < 0)
+ return ret;
+
+ tpf->numerator = 1;
+ tpf->denominator = fps;
+ priv->fps = tpf->denominator;
+
+ return 0;
+}
+
+static int ov772x_g_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_frame_interval *ival)
+{
+ struct ov772x_priv *priv = to_ov772x(sd);
+ struct v4l2_fract *tpf = &ival->interval;
+
+ memset(ival->reserved, 0, sizeof(ival->reserved));
+ tpf->numerator = 1;
+ tpf->denominator = priv->fps;
+
+ return 0;
+}
+
+static int ov772x_s_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_frame_interval *ival)
+{
+ struct ov772x_priv *priv = to_ov772x(sd);
+ struct v4l2_fract *tpf = &ival->interval;
+
+ memset(ival->reserved, 0, sizeof(ival->reserved));
+
+ return ov772x_set_frame_rate(priv, tpf, priv->cfmt, priv->win);
+}
+
static int ov772x_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct ov772x_priv *priv = container_of(ctrl->handler,
@@ -757,6 +905,7 @@ static int ov772x_set_params(struct ov772x_priv *priv,
const struct ov772x_win_size *win)
{
struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+ struct v4l2_fract tpf;
int ret;
u8 val;
@@ -885,6 +1034,13 @@ static int ov772x_set_params(struct ov772x_priv *priv,
if (ret < 0)
goto ov772x_set_fmt_error;
+ /* COM4, CLKRC: Set pixel clock and framerate. */
+ tpf.numerator = 1;
+ tpf.denominator = priv->fps;
+ ret = ov772x_set_frame_rate(priv, &tpf, cfmt, win);
+ if (ret < 0)
+ goto ov772x_set_fmt_error;
+
/*
* set COM8
*/
@@ -1043,6 +1199,24 @@ static const struct v4l2_subdev_core_ops ov772x_subdev_core_ops = {
.s_power = ov772x_s_power,
};
+static int ov772x_enum_frame_interval(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_frame_interval_enum *fie)
+{
+ if (fie->pad || fie->index >= OV772X_N_FRAME_INTERVALS)
+ return -EINVAL;
+
+ if (fie->width != VGA_WIDTH && fie->width != QVGA_WIDTH)
+ return -EINVAL;
+ if (fie->height != VGA_HEIGHT && fie->height != QVGA_HEIGHT)
+ return -EINVAL;
+
+ fie->interval.numerator = 1;
+ fie->interval.denominator = ov772x_frame_intervals[fie->index];
+
+ return 0;
+}
+
static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,
struct v4l2_subdev_mbus_code_enum *code)
@@ -1055,14 +1229,17 @@ static int ov772x_enum_mbus_code(struct v4l2_subdev *sd,
}
static const struct v4l2_subdev_video_ops ov772x_subdev_video_ops = {
- .s_stream = ov772x_s_stream,
+ .s_stream = ov772x_s_stream,
+ .s_frame_interval = ov772x_s_frame_interval,
+ .g_frame_interval = ov772x_g_frame_interval,
};
static const struct v4l2_subdev_pad_ops ov772x_subdev_pad_ops = {
- .enum_mbus_code = ov772x_enum_mbus_code,
- .get_selection = ov772x_get_selection,
- .get_fmt = ov772x_get_fmt,
- .set_fmt = ov772x_set_fmt,
+ .enum_frame_interval = ov772x_enum_frame_interval,
+ .enum_mbus_code = ov772x_enum_mbus_code,
+ .get_selection = ov772x_get_selection,
+ .get_fmt = ov772x_get_fmt,
+ .set_fmt = ov772x_set_fmt,
};
static const struct v4l2_subdev_ops ov772x_subdev_ops = {
@@ -1134,6 +1311,7 @@ static int ov772x_probe(struct i2c_client *client,
priv->cfmt = &ov772x_cfmts[0];
priv->win = &ov772x_win_sizes[0];
+ priv->fps = 15;
ret = v4l2_async_register_subdev(&priv->subdev);
if (ret)
--
2.7.4
Powered by blists - more mailing lists