| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180220181647.6f2367b6@bbrezillon>
Date: Tue, 20 Feb 2018 18:16:47 +0100
From: Boris Brezillon <boris.brezillon@...tlin.com>
To: Shreeya Patel <shreeya.patel23498@...il.com>
Cc: boris.brezillon@...e-electrons.com, richard@....at,
dwmw2@...radead.org, computersforpeace@...il.com,
marek.vasut@...il.com, cyrille.pitchen@...ev4u.fr,
maximlevitsky@...il.com, linux-mtd@...ts.infradead.org,
linux-kernel@...r.kernel.org, ezequiel@...guardiasur.com.ar,
outreachy-kernel@...glegroups.com
Subject: Re: [PATCH NAND v2] mtd: nand: Replace printk() with appropriate
pr_*macro()
On Tue, 20 Feb 2018 22:36:41 +0530
Shreeya Patel <shreeya.patel23498@...il.com> wrote:
> On Mon, 2018-02-19 at 15:51 +0100, Boris Brezillon wrote:
> > Hi Shreeya,
> >
> > On Mon, 19 Feb 2018 18:43:45 +0530
> > Shreeya Patel <shreeya.patel23498@...il.com> wrote:
> >
> > >
> > > The log levels embedded with the name are more concise than
> > > printk.
> > > Replace printks having a log level with the appropriate
> > > pr_*macro.
> > >
> > > Signed-off-by: Shreeya Patel <shreeya.patel23498@...il.com>
> > > ---
> > >
> > > Changes in v2:
> > > -Merge previous patches of the patchset regarding replacement
> > > of printk with pr_*macro, into single patch.
> > >
> > >
> > > drivers/mtd/nand/cs553x_nand.c | 9 ++---
> > > drivers/mtd/nand/diskonchip.c | 76 +++++++++++++++++++++-------
> > > ------------
> > > drivers/mtd/nand/fsl_elbc_nand.c | 2 +-
> > > drivers/mtd/nand/fsl_ifc_nand.c | 2 +-
> > > drivers/mtd/nand/mxc_nand.c | 2 +-
> > > drivers/mtd/nand/nand_bch.c | 12 +++----
> > > drivers/mtd/nand/nandsim.c | 10 +++---
> > > drivers/mtd/nand/r852.c | 2 +-
> > > drivers/mtd/nand/r852.h | 6 ++--
> > > drivers/mtd/nand/sm_common.c | 5 ++-
> > > 10 files changed, 65 insertions(+), 61 deletions(-)
> > >
> > [...]
> >
> > >
> > >
> > > diff --git a/drivers/mtd/nand/diskonchip.c
> > > b/drivers/mtd/nand/diskonchip.c
> > > index c3aa53c..b97d88c 100644
> > > --- a/drivers/mtd/nand/diskonchip.c
> > > +++ b/drivers/mtd/nand/diskonchip.c
> > [...]
> >
> > >
> > > @@ -438,7 +438,7 @@ static void __init doc2000_count_chips(struct
> > > mtd_info *mtd)
> > > break;
> > > }
> > > doc->chips_per_floor = i;
> > > - printk(KERN_DEBUG "Detected %d chips per floor.\n", i);
> > > + pr_info("Detected %d chips per floor.\n", i);
> > Should be pr_debug() here.
> >
> > >
> > > }
> > >
> > [...]
> >
> > >
> > > diff --git a/drivers/mtd/nand/nandsim.c
> > > b/drivers/mtd/nand/nandsim.c
> > > index 246b439..4e5f817 100644
> > > --- a/drivers/mtd/nand/nandsim.c
> > > +++ b/drivers/mtd/nand/nandsim.c
> > > @@ -184,15 +184,15 @@ MODULE_PARM_DESC(bch, "Enable
> > > BCH ecc and set how many bits should "
> > >
> > > /* Simulator's output macros (logging, debugging, warning, error)
> > > */
> > > #define NS_LOG(args...) \
> > > - do { if (log) printk(KERN_DEBUG NS_OUTPUT_PREFIX " log: "
> > > args); } while(0)
> > > + do { if (log) pr_debug(NS_OUTPUT_PREFIX " log: " args); }
> > > while(0)
> > You could define pr_fmt() to avoid passing NS_OUTPUT_PREFIX.
> > Something
> > like:
> >
> > #define pr_fmt(fmt) "[nandsim]" fmt
> >
> > (remember to put this definition before include directives).
> >
> > Then, all you have to do is
> >
> > do { if (log) pr_debug(" log: " args); } while(0)
> >
> > >
> > > #define NS_DBG(args...) \
> > > - do { if (dbg) printk(KERN_DEBUG NS_OUTPUT_PREFIX " debug:
> > > " args); } while(0)
> > > + do { if (dbg) pr_debug(NS_OUTPUT_PREFIX " debug: " args);
> > > } while(0)
> > > #define NS_WARN(args...) \
> > > - do { printk(KERN_WARNING NS_OUTPUT_PREFIX " warning: "
> > > args); } while(0)
> > > + do { pr_warn(NS_OUTPUT_PREFIX " warning: " args); }
> > > while(0)
> > > #define NS_ERR(args...) \
> > > - do { printk(KERN_ERR NS_OUTPUT_PREFIX " error: " args); }
> > > while(0)
> > > + do { pr_err(NS_OUTPUT_PREFIX " error: " args); } while(0)
> > > #define NS_INFO(args...) \
> > > - do { printk(KERN_INFO NS_OUTPUT_PREFIX " " args); }
> > > while(0)
> > > + do { pr_info(NS_OUTPUT_PREFIX " " args); } while(0)
> > >
> > > /* Busy-wait delay macros (microseconds, milliseconds) */
> > > #define NS_UDELAY(us) \
> > > diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
> > > index fc9287a..3d54c6a 100644
> > > --- a/drivers/mtd/nand/r852.c
> > > +++ b/drivers/mtd/nand/r852.c
> > > @@ -935,7 +935,7 @@ static int r852_probe(struct pci_dev *pci_dev,
> > > const struct pci_device_id *id)
> > > &dev->card_detect_work, 0);
> > >
> > >
> > > - printk(KERN_NOTICE DRV_NAME ": driver loaded
> > > successfully\n");
> > > + pr_notice(DRV_NAME ": driver loaded successfully\n");
> > Same here:
> >
> > #define pr_fmt(fmt) DRV_NAME fmt
>
> I am facing the following errors here.
>
>
>
> In file included from drivers/mtd/nand/r852.c:22:0:
> drivers/mtd/nand/r852.h:148:0: warning: "pr_fmt" redefined
> #define pr_fmt(fmt) (DRV_NAME fmt)
> ^
> In file included from ./include/linux/kernel.h:14:0,
> from drivers/mtd/nand/r852.c:10:
> ./include/linux/printk.h:287:0: note: this is the location of the
> previous definition
> #define pr_fmt(fmt) fmt
That's because you didn't define pr_fmt() before all the #include
directives in this driver. See the '#indef pr_fmt' statement in printk.h
which is preventing redefinition of this symbol if the file including
printk.h (either directly or indirectly) already defines it.
--
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
Powered by blists - more mailing lists