| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAKv+Gu8A1YKr5t0B=Fe2sF6+QT9iCVeRW+99K37g22viEoismA@mail.gmail.com>
Date: Tue, 20 Feb 2018 18:04:32 +0000
From: Ard Biesheuvel <ard.biesheuvel@...aro.org>
To: Andy Shevchenko <andy.shevchenko@...il.com>
Cc: Wolfram Sang <wsa@...-dreams.de>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-i2c <linux-i2c@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-arm Mailing List <linux-arm-kernel@...ts.infradead.org>,
Jassi Brar <jassisinghbrar@...il.com>
Subject: Re: [PATCH 2/2] i2c: add support for Socionext SynQuacer I2C controller
On 20 February 2018 at 14:02, Andy Shevchenko <andy.shevchenko@...il.com> wrote:
> On Tue, Feb 20, 2018 at 11:08 AM, Ard Biesheuvel
> <ard.biesheuvel@...aro.org> wrote:
>> This is a cleaned up version of the I2C controller driver for
>> the Fujitsu F_I2C IP, which was never supported upstream, and
>> has now been incorporated into the Socionext SynQuacer SoC.
>>
>
> Typical issues below.
>
>> +/* SPDX-License-Identifier: GPL-2.0 */
>
> Shouldn't be // ?
>
IIUC, this applies to .h files only, and /* */ is preferred for .c files.
>> +#include <linux/init.h>
>
>> +#include <linux/module.h>
>
> Supposed to be one of them, not both.
>
Ok.
>> +#define WAIT_PCLK(n, rate) ndelay((((1000000000 + (rate) - 1) / \
>> + (rate) + n - 1) / n) + 10)
>
> This split makes it harder to catch the calculus.
> Also, you can use DIV_ROUND_UP(), though it longer, but adds a bit of
> clarity to the calculus.
>
Yeah. This was present in the original code, and I tried to avoid
touching it :-)
>> +#define SYNQUACER_I2C_TIMEOUT(x) (msecs_to_jiffies(x))
>
> Isn't shorter to use original function in place?
>
Indeed. Will change.
>> +static inline unsigned long calc_timeout_ms(struct synquacer_i2c *i2c,
>> + struct i2c_msg *msgs,
>> + int num)
>> +{
>> + unsigned long bit_count = 0;
>> + int i;
>> +
>> + for (i = 0; i < num; i++, msgs++)
>> + bit_count += msgs->len;
>> +
>> + return DIV_ROUND_UP(((bit_count * 9) + (10 * num)) * 3, 200) + 10;
>
> Redundant parens surrounding multiplications.
>
> bit_count * 9 + num * 10 ?
>
OK
>> +}
>
>> +static void synquacer_i2c_stop(struct synquacer_i2c *i2c, int ret)
>> +{
>> + dev_dbg(i2c->dev, "STOP\n");
>
> Hmm... Can't use FTRACE ?
>
What do you mean?
>> +
>> + /*
>> + * clear IRQ (INT=0, BER=0)
>> + * set Stop Condition (MSS=0)
>> + * Interrupt Disable
>> + */
>> + writeb(0, i2c->base + SYNQUACER_I2C_REG_BCR);
>> +
>> + i2c->state = STATE_IDLE;
>> +
>> + i2c->msg_ptr = 0;
>> + i2c->msg = NULL;
>> + i2c->msg_idx++;
>> + i2c->msg_num = 0;
>> + if (ret)
>> + i2c->msg_idx = ret;
>> +
>> + complete(&i2c->completion);
>> +}
>
>> + default:
>> + BUG();
>
> Oh, oh. What is the strong argument to have this kind of crash here?
>
None. Will fix.
>> +static int synquacer_i2c_master_start(struct synquacer_i2c *i2c,
>> + struct i2c_msg *pmsg)
>> +{
>> + unsigned char bsr, bcr;
>
>> + dev_dbg(i2c->dev, "%s slave:0x%02x\n", __func__, pmsg->addr);
>
> __func__ is redundant (See dynamic debug manual how to enable run-time).
>
OK. Will remove.
>> + /* Force to make one clock pulse */
>
>> + count = 0;
>> + for (;;) {
>
>> + if (++count > 9) {
>> + dev_err(i2c->dev, "%s: count: %i, bc2r: 0x%x\n",
>> + __func__, count, bc2r);
>> + return -EIO;
>> + }
>> + }
>
> Personally I think for iterations do {} while approach looks cleaner
> and more understandable:
>
> unsigned int count = 10;
>
> do {
> ...
> } while (--count);
>
I'll clean that up, it does look a bit awkward.
>> +static int synquacer_i2c_doxfer(struct synquacer_i2c *i2c,
>> + struct i2c_msg *msgs, int num)
>> +{
>> + unsigned char bsr;
>> + unsigned long timeout, bb_timeout;
>
>> + int ret = 0;
>
> Redundant assignment.
>
Will fix
>> + ret = synquacer_i2c_master_start(i2c, i2c->msg);
>> + if (ret < 0) {
>> + dev_dbg(i2c->dev, "Address failed: (0x%08x)\n", ret);
>
> ret as a hex?!?!
> So confusing.
>
> A side note, %#08x will print 0x.
>
Yeah that should be %d
>> +out:
>> + return ret;
>
> Useless label since there is nothing except returning an error code.
>
Will remove
>> +static int synquacer_i2c_probe(struct platform_device *pdev)
>> +{
>> + struct synquacer_i2c *i2c;
>> + struct resource *r;
>> + int speed_khz;
>> + int ret;
>
>> + if (dev_of_node(&pdev->dev)) {
>> + i2c->clk = devm_clk_get(&pdev->dev, "pclk");
>> + if (IS_ERR(i2c->clk)) {
>> + dev_err(&pdev->dev, "cannot get clock\n");
>> + return PTR_ERR(i2c->clk);
>> + }
>> + dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
>> +
>> + i2c->clkrate = clk_get_rate(i2c->clk);
>> + dev_dbg(&pdev->dev, "clock rate %d\n", i2c->clkrate);
>> + clk_prepare_enable(i2c->clk);
>> + } else {
>
>> + ret = device_property_read_u32(&pdev->dev,
>> + "socionext,pclk-rate",
>> + &i2c->clkrate);
>
> I suppose for ACPI we just register a fixed rate clock and use it in
> the driver in the same way as in OF case.
> I guess at some point we even can provide a generic clock provider for
> ACPI based on rate property.
>
Is there a question here? Do you want me to change anything?
>> + if (ret)
>> + return ret;
>> + }
>
>> + i2c->state = STATE_IDLE;
>> + i2c->dev = &pdev->dev;
>
>> + i2c->msg = NULL;
>
> Isn't it done by z letter in allocation?
>
Yes it is
>
>> +#ifdef CONFIG_PM_SLEEP
>
> __maybe_unused instead of ugly #ifdef:s.
>
OK
>> +static int synquacer_i2c_suspend(struct device *dev)
>
>> +static int synquacer_i2c_resume(struct device *dev)
>
>> +#else
>> +#define SYNQUACER_I2C_PM NULL
>> +#endif
>
>> +#ifdef CONFIG_OF
>
> OK, this is fine since we have an ACPI ID for it.
>
>> +static const struct of_device_id synquacer_i2c_dt_ids[] = {
>> + { .compatible = "socionext,synquacer-i2c" },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, synquacer_i2c_dt_ids);
>> +#endif
>> +
>> +#ifdef CONFIG_ACPI
>> +static const struct acpi_device_id synquacer_i2c_acpi_ids[] = {
>> + { "SCX0003" },
>> + { /* sentinel */ }
>> +};
>> +#endif
>
>> +static struct platform_driver synquacer_i2c_driver = {
>> + .probe = synquacer_i2c_probe,
>> + .remove = synquacer_i2c_remove,
>> + .driver = {
>
>> + .owner = THIS_MODULE,
>
> Macro below will fill this for you.
>
OK
>> + .name = "synquacer_i2c",
>> + .of_match_table = of_match_ptr(synquacer_i2c_dt_ids),
>> + .acpi_match_table = ACPI_PTR(synquacer_i2c_acpi_ids),
>> + .pm = SYNQUACER_I2C_PM,
>> + },
>> +};
>> +module_platform_driver(synquacer_i2c_driver);
>
> --
> With Best Regards,
> Andy Shevchenko
Thanks for the review.
Powered by blists - more mailing lists