[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180221145646.i4v2ez5uwscy3gm2@linaro.org>
Date: Wed, 21 Feb 2018 20:26:47 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Philippe Ombredanne <pombredanne@...b.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Andreas Färber <afaerber@...e.de>,
liuwei@...ions-semi.com, mp-cs@...ions-semi.com,
96boards@...obotics.com,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Daniel Thompson <daniel.thompson@...aro.org>,
amit.kucheria@...aro.org,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>, linux-gpio@...r.kernel.org,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 04/10] pinctrl: actions: Add Actions S900 pinctrl driver
Hi Philippe,
On Tue, Feb 20, 2018 at 08:53:22AM +0100, Philippe Ombredanne wrote:
> Dear Manivannan,
>
> On Sat, Feb 17, 2018 at 9:44 PM, Manivannan Sadhasivam
> <manivannan.sadhasivam@...aro.org> wrote:
> > Add pinctrl driver for Actions Semi S900 SoC. The driver supports
> > pinctrl, pinmux and pinconf functionalities through a range of registers
> > common to both gpio driver and pinctrl driver.
> >
> > Pinmux functionality is available only for the pin groups while the
> > pinconf functionality is available for both pin groups and individual
> > pins.
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
>
>
> <snip>
>
>
> > --- /dev/null
> > +++ b/drivers/pinctrl/actions/pinctrl-s900.c
> > @@ -0,0 +1,2536 @@
> > +// SPDX-License-Identifier: GPL-2.0+
>
> <snip>
>
> > +MODULE_LICENSE("GPL v2");
>
> This does not match your license above. Per module.h "GPL v2" means
> GPL-2.0 where you license above GPL-2.0+ means or later
>
Should be MODULE_LICENSE("GPL"). Will get it fixed in next revision.
Thanks,
Mani
> --
> Cordially
> Philippe Ombredanne
Powered by blists - more mailing lists