linux-kernel - Re: [PATCH v2 09/19] ARM64: dts: Add R-Car Salvator-x M3-N support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAK8P3a30pgOXvLLHe3Hb-ubPz6QeUiZKFqMZLm8Qp_7KRr7QuA@mail.gmail.com>
Date:   Thu, 22 Feb 2018 12:39:46 +0100
From:   Arnd Bergmann <arnd@...db.de>
To:     Simon Horman <horms@...ge.net.au>
Cc:     Geert Uytterhoeven <geert@...ux-m68k.org>,
        Jacopo Mondi <jacopo+renesas@...ndi.org>,
        Magnus Damm <magnus.damm@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 09/19] ARM64: dts: Add R-Car Salvator-x M3-N support

On Wed, Feb 21, 2018 at 6:15 PM, Simon Horman <horms@...ge.net.au> wrote:
> On Tue, Feb 20, 2018 at 04:46:23PM +0100, Geert Uytterhoeven wrote:
>> On Tue, Feb 20, 2018 at 4:12 PM, Jacopo Mondi <jacopo+renesas@...ndi.org> wrote:
>> > Add basic support for R-Car Salvator-X M3-N (R8A77965) board.
>> >
>> > Based on original work from:
>> > Takeshi Kihara <takeshi.kihara.df@...esas.com>
>> > Magnus Damm <damm+renesas@...nsource.se>
>> >
>> > Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
>>
>> Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>
>
> Thanks, applied with prefix updated to
>
> "arm64: dts: renesas:"
>
> There was some fuzz applying this patch, the result is as follows.
>
> From: Jacopo Mondi <jacopo+renesas@...ndi.org>
> Subject: [PATCH] arm64: dts: renesas: Add R-Car Salvator-x M3-N support
>
> Add basic support for R-Car Salvator-X M3-N (R8A77965) board.
>
> Based on original work from:
> Takeshi Kihara <takeshi.kihara.df@...esas.com>
> Magnus Damm <damm+renesas@...nsource.se>
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@...der.be>

Something went wrong with this patch, I suspect it's missing some prerequisites
that fill in a few more device nodes to avoid these warnings in linux-next:

arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(reg_format): "reg" property in /soc/ethernet@...00000/ethernet-phy@0
has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(reg_format): "reg" property in /soc/i2c@...10000/codec@10 has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(reg_format): "reg" property in /soc/i2c@...10000/clk_multiplier@4f
has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(reg_format): "reg" property in /soc/i2c@...d8000/gpio@20 has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(reg_format): "reg" property in /soc/i2c@...d8000/adc@7c has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(reg_format): "reg" property in /soc/i2c@...d8000/adc@7f has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(reg_format): "reg" property in /soc/i2c@...d8000/clock-generator@6a
has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(reg_format): "reg" property in /soc/i2c@...b0000/pmic@30 has invalid
length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(reg_format): "reg" property in /soc/display@...00000/ports/port@0 has
invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(reg_format): "reg" property in /soc/display@...00000/ports/port@1 has
invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(reg_format): "reg" property in /soc/display@...00000/ports/port@2 has
invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/soc/ethernet@...00000/ethernet-phy@0
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/soc/ethernet@...00000/ethernet-phy@0
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/soc/i2c@...10000/codec@10
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/soc/i2c@...10000/codec@10
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/soc/i2c@...10000/clk_multiplier@4f
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/soc/i2c@...10000/clk_multiplier@4f
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/soc/i2c@...d8000/gpio@20
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/soc/i2c@...d8000/gpio@20
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/soc/i2c@...d8000/adc@7c
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/soc/i2c@...d8000/adc@7c
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/soc/i2c@...d8000/adc@7f
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/soc/i2c@...d8000/adc@7f
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/soc/i2c@...d8000/clock-generator@6a
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/soc/i2c@...d8000/clock-generator@6a
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/soc/i2c@...b0000/pmic@30
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/soc/i2c@...b0000/pmic@30
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/soc/display@...00000/ports/port@0
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/soc/display@...00000/ports/port@0
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/soc/display@...00000/ports/port@1
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/soc/display@...00000/ports/port@1
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #address-cells value for
/soc/display@...00000/ports/port@2
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(avoid_default_addr_size): Relying on default #size-cells value for
/soc/display@...00000/ports/port@2
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(phys_property): Missing property '#phy-cells' in node
/soc/usb-phy@...ee000 or bad phandle (referred from
/soc/usb@...20000:phys[0])
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(pwms_property): Missing property '#pwm-cells' in node
/soc/pwm@...31000 or bad phandle (referred from /backlight:pwms[0])
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(interrupts_property): Missing interrupt-controller or interrupt-map
property in /soc/interrupt-controller@...c0000
arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dtb: Warning
(interrupts_property): Missing #interrupt-cells in interrupt-parent
/soc/interrupt-controller@...c0000

Maybe just take out the patch adding the .dts file for the time being until
the important nodes are all in place?

        Arnd