linux-kernel - Re: [RFC PATCH] mmc: sdhci-of-arasan: Add auto tuning support for ZynqMP Platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ef213352-4d4e-bab0-8c1d-e0f87abb2492@intel.com>
Date:   Fri, 23 Feb 2018 09:34:11 +0200
From:   Adrian Hunter <adrian.hunter@...el.com>
To:     Manish Narani <MNARANI@...inx.com>,
        "michal.simek@...inx.com" <michal.simek@...inx.com>,
        "ulf.hansson@...aro.org" <ulf.hansson@...aro.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "robh+dt@...nel.org" <robh+dt@...nel.org>
Cc:     Anirudha Sarangi <anirudh@...inx.com>,
        Srinivas Goud <sgoud@...inx.com>
Subject: Re: [RFC PATCH] mmc: sdhci-of-arasan: Add auto tuning support for
 ZynqMP Platform

On 23/02/18 09:29, Manish Narani wrote:
> 
> 
>> -----Original Message-----
>> From: Adrian Hunter [mailto:adrian.hunter@...el.com]
>> Sent: Thursday, February 22, 2018 1:50 PM
>> To: Manish Narani <MNARANI@...inx.com>; michal.simek@...inx.com;
>> ulf.hansson@...aro.org; linux-arm-kernel@...ts.infradead.org; linux-
>> mmc@...r.kernel.org; linux-kernel@...r.kernel.org;
>> devicetree@...r.kernel.org; mark.rutland@....com; robh+dt@...nel.org
>> Cc: Anirudha Sarangi <anirudh@...inx.com>; Srinivas Goud
>> <sgoud@...inx.com>
>> Subject: Re: [RFC PATCH] mmc: sdhci-of-arasan: Add auto tuning support for
>> ZynqMP Platform
>>
>> On 21/02/18 17:00, Manish Narani wrote:
>>> Hi Adrian,
>>>
>>>> -----Original Message-----
>>>> From: Manish Narani
>>>> Sent: Wednesday, February 21, 2018 11:39 AM
>>>> To: Adrian Hunter <adrian.hunter@...el.com>; michal.simek@...inx.com;
>>>> ulf.hansson@...aro.org; linux-arm-kernel@...ts.infradead.org; linux-
>>>> mmc@...r.kernel.org; linux-kernel@...r.kernel.org;
>>>> devicetree@...r.kernel.org; mark.rutland@....com;
>> robh+dt@...nel.org
>>>> Cc: Anirudha Sarangi <anirudh@...inx.com>; Srinivas Goud
>>>> <sgoud@...inx.com>
>>>> Subject: RE: [RFC PATCH] mmc: sdhci-of-arasan: Add auto tuning
>>>> support for ZynqMP Platform
>>>>
>>>> Hi Adrian,
>>>>
>>>>
>>>>> -----Original Message-----
>>>>> From: Adrian Hunter [mailto:adrian.hunter@...el.com]
>>>>> Sent: Friday, February 16, 2018 7:37 PM
>>>>> To: Manish Narani <MNARANI@...inx.com>; michal.simek@...inx.com;
>>>>> ulf.hansson@...aro.org; linux-arm-kernel@...ts.infradead.org; linux-
>>>>> mmc@...r.kernel.org; linux-kernel@...r.kernel.org;
>>>>> devicetree@...r.kernel.org; mark.rutland@....com;
>> robh+dt@...nel.org
>>>>> Cc: Anirudha Sarangi <anirudh@...inx.com>; Srinivas Goud
>>>>> <sgoud@...inx.com>; Manish Narani <MNARANI@...inx.com>
>>>>> Subject: Re: [RFC PATCH] mmc: sdhci-of-arasan: Add auto tuning
>>>>> support for ZynqMP Platform
>>>>>
>>>>> On 30/01/18 20:14, Manish Narani wrote:
>>>>>> This patch adds support of SD auto tuning for ZynqMP platform. Auto
>>>>>> tuning sequence sends tuning block to card when operating in UHS-1
>>>>>> modes. This resets the DLL and sends CMD19/CMD21 as a part of the
>>>>>> auto tuning process. Once the auto tuning process gets completed,
>>>>>> reset the DLL to load the newly obtained SDHC tuned tap value.
>>>>>
>>>>> How is this different from:
>>>>> 	1. reset the dll
>>>>> 	2. call sdhci_execute_tuning
>>>>> 	3. reset the dll
>>>>>
>>> Below is my take on your above comments:
>>> - 'Reset the dll' is a platform specific call inside
>>> 'arasan_zynqmp_execute_tuning' which is implemented in
>>> sdhci-of-arasan.c
>>> - 'arasan_zynqmp_execute_tuning' is called from 'sdhci_execute_tuning'
>>> as a platform_execute_tuning routine
>>> - So to keep 'DLL reset' routine called from sdhci-of-arasan.c, I have
>>> implemented the execute_tuning in sdhci-of-arasan.c
>>
>> I meant something like:
>>
>> 	if (of_device_is_compatible(pdev->dev.of_node, "xlnx,zynqmp-
>> 8.9a"))
>> 		host->mmc_host_ops.execute_tuning =
>> arasan_zynqmp_execute_tuning;
>>
> This will need the removal of 'const' from 'static const struct mmc_host_ops sdhci_ops = {}' in sdhci.c file. Please confirm.

No, it is not const.  You are not looking at the right place. i.e.

$ grep mmc_host_ops drivers/mmc/host/sdhci.h
        struct mmc_host_ops mmc_host_ops;       /* MMC host ops */

> 
> Thanks,
> Manish
>>
>> static int arasan_zynqmp_execute_tuning(struct mmc_host *mmc, u32
>> opcode) {
>> 	struct sdhci_host *host = mmc_priv(mmc);
>> 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>> 	struct sdhci_arasan_data *sdhci_arasan =
>> sdhci_pltfm_priv(pltfm_host);
>> 	int err;
>>
>> 	arasan_zynqmp_dll_reset(host, sdhci_arasan->device_id);
>>
>> 	err = sdhci_execute_tuning(mmc, opcode);
>> 	if (err)
>> 		return err;
>>
>> 	arasan_zynqmp_dll_reset(host, sdhci_arasan->device_id);
>>
>> 	return 0;
>> }
>>
>>>
>>> Alternative way (Please review):
>>> - Define a host->quirk2 bit (SDHCI_QUIRK2_DLL_RESET_NEEDED) in
>>> sdhci-of-arasan.c indicating DLL reset needed while tuning operation
>>> - Call 'dll reset' routine before and after __sdhci_execute_tuning()
>>> in sdhci.c when a host->quirk2 bit (SDHCI_QUIRK2_DLL_RESET_NEEDED) is
>>> set
>>
>> We should try to avoid quirks.