[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180223151821.gqn66roldejpowzu@flea.lan>
Date: Fri, 23 Feb 2018 16:18:21 +0100
From: Maxime Ripard <maxime.ripard@...tlin.com>
To: Icenowy Zheng <icenowy@...c.io>
Cc: Chen-Yu Tsai <wens@...e.org>,
Linus Walleij <linus.walleij@...aro.org>,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH v3 2/7] pinctrl: sunxi: support pin controllers with
holes among IRQ banks
On Fri, Feb 23, 2018 at 08:25:47PM +0800, Icenowy Zheng wrote:
> The Allwinner H6 SoC have its pin controllers with the first IRQ-capable
> GPIO bank at IRQ bank 1 and the second bank at IRQ bank 5. This
> situation cannot be processed with the current pinctrl IRQ code, as it
> only expects a offset to all IRQ banks.
>
> Update the code to use a logical IRQ bank to hardware IRQ bank map, so
> the new situation in H6 main pin controller can be processed. The old
> special situation which uses a constant offset (on A33 and V3s, both
> with a offset of 1) can be also processed with the new code.
>
> Signed-off-by: Icenowy Zheng <icenowy@...c.io>
> ---
> Changes in v3:
> - change for the refactor in the new PATCH 1.
>
> No changes in v2.
>
> drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c | 4 +++-
> drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c | 4 +++-
> drivers/pinctrl/sunxi/pinctrl-sunxi.h | 29 +++++++++++++++++------------
> 3 files changed, 23 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c
> index da387211a75e..f043afa1aac5 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a33.c
> @@ -481,11 +481,13 @@ static const struct sunxi_desc_pin sun8i_a33_pins[] = {
> SUNXI_FUNCTION(0x3, "uart3")), /* CTS */
> };
>
> +static const unsigned int sun8i_a33_pinctrl_irq_bank_map[] = { 1, 2 };
> +
> static const struct sunxi_pinctrl_desc sun8i_a33_pinctrl_data = {
> .pins = sun8i_a33_pins,
> .npins = ARRAY_SIZE(sun8i_a33_pins),
> .irq_banks = 2,
> - .irq_bank_base = 1,
> + .irq_bank_map = sun8i_a33_pinctrl_irq_bank_map,
> .disable_strict_mode = true,
> };
>
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c
> index 496ba34e1f5f..6704ce8e5e3d 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-v3s.c
> @@ -293,11 +293,13 @@ static const struct sunxi_desc_pin sun8i_v3s_pins[] = {
> SUNXI_FUNCTION_IRQ_BANK(0x6, 1, 5)), /* PG_EINT5 */
> };
>
> +static const unsigned int sun8i_v3s_pinctrl_irq_bank_map[] = { 1, 2 };
> +
> static const struct sunxi_pinctrl_desc sun8i_v3s_pinctrl_data = {
> .pins = sun8i_v3s_pins,
> .npins = ARRAY_SIZE(sun8i_v3s_pins),
> .irq_banks = 2,
> - .irq_bank_base = 1,
> + .irq_bank_map = sun8i_v3s_pinctrl_irq_bank_map,
> .irq_read_needs_mux = true
> };
>
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.h b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> index 909ca1504b61..36502cbef6c2 100644
> --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.h
> @@ -110,7 +110,7 @@ struct sunxi_pinctrl_desc {
> int npins;
> unsigned pin_base;
> unsigned irq_banks;
> - unsigned irq_bank_base;
> + const unsigned int *irq_bank_map;
> bool irq_read_needs_mux;
> bool disable_strict_mode;
> };
> @@ -263,14 +263,23 @@ static inline u32 sunxi_pull_offset(u16 pin)
> return pin_num * PULL_PINS_BITS;
> }
>
> +static inline u32 sunxi_irq_hw_bank_num(u8 bank,
> + const struct sunxi_pinctrl_desc *desc)
> +{
> + if (!desc->irq_bank_map)
> + return bank;
> + else
> + return desc->irq_bank_map[bank];
> +}
> +
Same remark about the order of the argument, and I would have split
this patch in two, one to introduce the new function (but still using
the irq_bank_base), and then a second patch to introduce the
irq_bank_map.
Looks good otherwise, thanks!
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists