[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180223170754.905649117@linuxfoundation.org>
Date: Fri, 23 Feb 2018 19:26:42 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Roy Chung <roychung@...ology.com>,
Alex Wu <alexwu@...ology.com>,
BingJing Chang <bingjingc@...ology.com>,
Shaohua Li <shli@...com>,
Sasha Levin <alexander.levin@...izon.com>
Subject: [PATCH 4.14 094/159] md/raid5: correct degraded calculation in raid5_error
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: bingjingc <bingjingc@...ology.com>
[ Upstream commit aff69d89bdebc39235cddb4445371eb979b49685 ]
When disk failure occurs on new disks for reshape, mddev->degraded
is not calculated correctly. Faulty bit of the failure device is not
set before raid5_calc_degraded(conf).
mdadm --create /dev/md0 --level=5 --raid-devices=3 /dev/loop[012]
mdadm /dev/md0 -a /dev/loop3
mdadm /dev/md0 --grow -n4
mdadm /dev/md0 -f /dev/loop3 # simulating disk failure
cat /sys/block/md0/md/degraded # it outputs 0, but it should be 1.
However, mdadm -D /dev/md0 will show that it is degraded. It's a bug.
It can be fixed by moving the resources raid5_calc_degraded() depends
on before it.
Reported-by: Roy Chung <roychung@...ology.com>
Reviewed-by: Alex Wu <alexwu@...ology.com>
Signed-off-by: BingJing Chang <bingjingc@...ology.com>
Signed-off-by: Shaohua Li <shli@...com>
Signed-off-by: Sasha Levin <alexander.levin@...izon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/md/raid5.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -2678,13 +2678,13 @@ static void raid5_error(struct mddev *md
pr_debug("raid456: error called\n");
spin_lock_irqsave(&conf->device_lock, flags);
+ set_bit(Faulty, &rdev->flags);
clear_bit(In_sync, &rdev->flags);
mddev->degraded = raid5_calc_degraded(conf);
spin_unlock_irqrestore(&conf->device_lock, flags);
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
set_bit(Blocked, &rdev->flags);
- set_bit(Faulty, &rdev->flags);
set_mask_bits(&mddev->sb_flags, 0,
BIT(MD_SB_CHANGE_DEVS) | BIT(MD_SB_CHANGE_PENDING));
pr_crit("md/raid:%s: Disk failure on %s, disabling device.\n"
Powered by blists - more mailing lists