linux-kernel - [PATCH v2 4/4] pintcrl: support bias-disable of generic and special pins simultaneously

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1519634042-12063-5-git-send-email-zhiyong.tao@mediatek.com>
Date:   Mon, 26 Feb 2018 16:34:02 +0800
From:   Zhiyong Tao <zhiyong.tao@...iatek.com>
To:     <robh+dt@...nel.org>, <linus.walleij@...aro.org>,
        <mark.rutland@....com>, <matthias.bgg@...il.com>
CC:     <srv_heupstream@...iatek.com>, <liguo.zhang@...iatek.com>,
        <yingjoe.chen@...iatek.com>, <hongkun.cao@...iatek.com>,
        <biao.huang@...iatek.com>, <yt.shen@...iatek.com>,
        <hongzhou.yang@...iatek.com>, <erin.lo@...iatek.com>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>, <linux-gpio@...r.kernel.org>,
        Zhiyong Tao <zhiyong.tao@...iatek.com>
Subject: [PATCH v2 4/4] pintcrl: support bias-disable of generic and special pins simultaneously

For generic pins, parameter "arg" is 0 or 1.
For special pins, bias-disable is set by R0R1,
so we need transmited "00" to set bias-disable
When we set "bias-disable" as high-z property,
the parameter should be "MTK_PUPD_SET_R1R0_00".

Signed-off-by: Zhiyong Tao <zhiyong.tao@...iatek.com>
---
 drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index 3cf384f..e88ba04 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -301,8 +301,17 @@ static int mtk_pconf_set_pull_select(struct mtk_pinctrl *pctl,
 	 * resistor bit, so we need this special handle.
 	 */
 	if (pctl->devdata->spec_pull_set) {
-		ret = pctl->devdata->spec_pull_set(mtk_get_regmap(pctl, pin),
-			pin, pctl->devdata->port_align, isup, arg);
+		if (enable) {
+			ret = pctl->devdata->spec_pull_set(
+				mtk_get_regmap(pctl, pin), pin,
+				pctl->devdata->port_align, isup,
+				arg);
+		} else {
+			ret = pctl->devdata->spec_pull_set(
+				mtk_get_regmap(pctl, pin), pin,
+				pctl->devdata->port_align, isup,
+				MTK_PUPD_SET_R1R0_00);
+		}
 		if (!ret)
 			return 0;
 	}
-- 
1.9.1