| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1519638811-17269-1-git-send-email-sricharan@codeaurora.org>
Date: Mon, 26 Feb 2018 15:23:16 +0530
From: Sricharan R <sricharan@...eaurora.org>
To: viresh.kumar@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
mturquette@...libre.com, sboyd@...eaurora.org,
linux@...linux.org.uk, andy.gross@...aro.org,
david.brown@...aro.org, rjw@...ysocki.net,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
linux-pm@...r.kernel.org, robh@...nel.org
Cc: sricharan@...eaurora.org
Subject: [PATCH v7 00/15] Krait clocks + Krait CPUfreq
[v7]
* Fixed comments from Viresh for cleaning up the error handling
in qcom-cpufreq.c. Also changed the init function to lateinit
call. This is required because nvmem which gets initialised with
module_init needs to go first.
* Fixed Rob's comments for bindings documentation
* Fixed kbuild build issue in clk-lpc32xx.c
* Rebased on top of clk-next
[v6]
* Adrressed comments from Viresh for patch #14 in v5 [5]
* Introduced a new binding operating-points-v2-krait-cpu
as per discussion with Rob
* Added Review tags
[v5]
* Addressed comments from Rob for bindings
* Addressed comments from Viresh to use dev_pm_opp_set_prop_name, accordingly
dropped patch #12 and corrected patch #11 from previous patch set in [4]
* Converted to use #spdx tags for newly introduced files
Mostly a resend of the v3 posted by Stephen quite some time back [1]
except for few changes.
Based on reading some feedback from list,
* Dropped the patch "clk: Add safe switch hook" from v3 [2].
Now this is taken care by patch#10 in this series only for Krait.
* Dropped the path "clk: Avoid sending high rates to downstream
clocks during set_rate" from v3 [3].
* Rebased on top of clk-next.
* Dropped the DT update from the series. Will send separately
* Now with cpufreq-dt+opp supporting voltage scaling, registering the
krait cpu supplies in DT should be sufficient. But one issue is,
the qcom-cpufreq drivers reads the efuse and based on that registers
the opp data and then registers the cpufreq-dt device. So when
cpufreq-dt driver probes and registers the regulator to the OPP framework,
it expects that the opp data for the device should not be registered before
the regulator. Will send a RFC patch removing that check, to find out the
right way of doing it.
These patches provide cpufreq scaling on devices with Krait CPUs.
In Krait CPU designs there's one PLL and two muxes per CPU, allowing
us to switch CPU frequencies independently.
secondary
+-----+ +
| QSB |-------+------------|\
+-----+ | | |-+
| +-------|/ |
| | + |
+-----+ | | |
| PLL |----+-------+ | primary
+-----+ | | | +
| | +-----|\ +------+
+-------+ | | | \ | |
| HFPLL |----------+-----------------| |-----| CPU0 |
+-------+ | | | | | | |
| | | +-----+ | / +------+
| | +-| / 2 |---------|/
| | +-----+ +
| | secondary
| | +
| +------------|\
| | |-+
+---------------|/ | primary
+ | +
+-----|\ +------+
+-------+ | \ | |
| HFPLL |----------------------------| |-----| CPU1 |
+-------+ | | | | |
| +-----+ | / +------+
+-| / 2 |---------|/
+-----+ +
To support this in the common clock framework we model the muxes,
dividers, and PLLs as different clocks. CPUfreq only interacts
with the primary mux (farthest right in the diagram). When CPUfreq
sets a rate, the mux code finds the best parent that can provide the rate.
Due to the design, QSB and the top PLL are always a fixed rate and thus
only support one frequency each. These sources provide the lowest
frequencies for the CPUs. The HFPLLs are where we can make the CPU go
faster (GHz range). Sometimes we need to run the HFPLL twice as
fast and divide it by two to get a particular frequency.
When switching rates we can't leave the CPU clocked by the HFPLL because
we need to turn off the output of the PLL when changing its frequency.
This means we have to switch over to the secondary mux and use one of the
fixed sources. This is why we need something like the safe parent patch.
[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332607.html
[2] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332615.html
[3] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/332608.html
[4] https://lwn.net/Articles/740994/
[5] https://lkml.org/lkml/2017/12/19/537
Sricharan R (2):
clk: qcom: Add safe switch hook for krait mux clocks
dt-bindings: cpufreq: Document operating-points-v2-krait-cpu
Stephen Boyd (13):
ARM: Add Krait L2 register accessor functions
clk: mux: Split out register accessors for reuse
clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
clk: qcom: Add HFPLL driver
dt-bindings: clock: Document qcom,hfpll
clk: qcom: Add MSM8960/APQ8064's HFPLLs
clk: qcom: Add IPQ806X's HFPLLs
clk: qcom: Add support for Krait clocks
clk: qcom: Add KPSS ACC/GCC driver
dt-bindings: arm: Document qcom,kpss-gcc
clk: qcom: Add Krait clock controller driver
dt-bindings: clock: Document qcom,krait-cc
cpufreq: Add module to register cpufreq on Krait CPUs
.../devicetree/bindings/arm/msm/qcom,kpss-acc.txt | 7 +
.../devicetree/bindings/arm/msm/qcom,kpss-gcc.txt | 32 ++
.../devicetree/bindings/clock/qcom,hfpll.txt | 46 +++
.../devicetree/bindings/clock/qcom,krait-cc.txt | 22 ++
.../devicetree/bindings/cpufreq/krait-cpufreq.txt | 363 +++++++++++++++++++
arch/arm/common/Kconfig | 3 +
arch/arm/common/Makefile | 1 +
arch/arm/common/krait-l2-accessors.c | 48 +++
arch/arm/include/asm/krait-l2-accessors.h | 10 +
drivers/clk/clk-mux.c | 74 ++--
drivers/clk/nxp/clk-lpc32xx.c | 21 +-
drivers/clk/qcom/Kconfig | 28 ++
drivers/clk/qcom/Makefile | 5 +
drivers/clk/qcom/clk-hfpll.c | 244 +++++++++++++
drivers/clk/qcom/clk-hfpll.h | 45 +++
drivers/clk/qcom/clk-krait.c | 126 +++++++
drivers/clk/qcom/clk-krait.h | 41 +++
drivers/clk/qcom/gcc-ipq806x.c | 82 +++++
drivers/clk/qcom/gcc-msm8960.c | 172 +++++++++
drivers/clk/qcom/hfpll.c | 96 +++++
drivers/clk/qcom/kpss-xcc.c | 87 +++++
drivers/clk/qcom/krait-cc.c | 397 +++++++++++++++++++++
drivers/cpufreq/Kconfig.arm | 10 +
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
drivers/cpufreq/qcom-cpufreq.c | 181 ++++++++++
include/dt-bindings/clock/qcom,gcc-msm8960.h | 2 +
include/linux/clk-provider.h | 6 +
28 files changed, 2111 insertions(+), 44 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt
create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
create mode 100644 Documentation/devicetree/bindings/cpufreq/krait-cpufreq.txt
create mode 100644 arch/arm/common/krait-l2-accessors.c
create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
create mode 100644 drivers/clk/qcom/clk-hfpll.c
create mode 100644 drivers/clk/qcom/clk-hfpll.h
create mode 100644 drivers/clk/qcom/clk-krait.c
create mode 100644 drivers/clk/qcom/clk-krait.h
create mode 100644 drivers/clk/qcom/hfpll.c
create mode 100644 drivers/clk/qcom/kpss-xcc.c
create mode 100644 drivers/clk/qcom/krait-cc.c
create mode 100644 drivers/cpufreq/qcom-cpufreq.c
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists