linux-kernel - Re: [PATCH] clk: tegra: fix pllu rate configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <31f039e8-9afc-22d1-d478-a7f41db0dace@gmail.com>
Date:   Mon, 26 Feb 2018 15:42:44 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Marcel Ziswiler <marcel@...wiler.com>, linux-tegra@...r.kernel.org
Cc:     Marcel Ziswiler <marcel.ziswiler@...adex.com>,
        Thierry Reding <thierry.reding@...il.com>,
        Stephen Boyd <sboyd@...nel.org>, linux-kernel@...r.kernel.org,
        Prashant Gaikwad <pgaikwad@...dia.com>,
        Peter De Schrijver <pdeschrijver@...dia.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Michael Turquette <mturquette@...libre.com>,
        linux-clk@...r.kernel.org
Subject: Re: [PATCH] clk: tegra: fix pllu rate configuration

On 23.02.2018 02:04, Marcel Ziswiler wrote:
> Turns out latest upstream U-Boot does not configure/enable pllu which
> leaves it at some default rate of 500 kHz:
> 
> root@...lis-t30:~# cat /sys/kernel/debug/clk/clk_summary | grep pll_u
>        pll_u                  3        3        0      500000          0
> 
> Of course this won't quite work leading to the following messages:
> 
> [    6.559593] usb 2-1: new full-speed USB device number 2 using tegra-
> ehci
> [   11.759173] usb 2-1: device descriptor read/64, error -110
> [   27.119453] usb 2-1: device descriptor read/64, error -110
> [   27.389217] usb 2-1: new full-speed USB device number 3 using tegra-
> ehci
> [   32.559454] usb 2-1: device descriptor read/64, error -110
> [   47.929777] usb 2-1: device descriptor read/64, error -110
> [   48.049658] usb usb2-port1: attempt power cycle
> [   48.759475] usb 2-1: new full-speed USB device number 4 using tegra-
> ehci
> [   59.349457] usb 2-1: device not accepting address 4, error -110
> [   59.509449] usb 2-1: new full-speed USB device number 5 using tegra-
> ehci
> [   70.069457] usb 2-1: device not accepting address 5, error -110
> [   70.079721] usb usb2-port1: unable to enumerate USB device
> 
> Fix this by actually allowing the rate also being set from within
> the Linux kernel.
> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@...adex.com>
> 
> ---
> 
>  drivers/clk/tegra/clk-pll.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
> index 7c369e21c91c..830d1c87fa7c 100644
> --- a/drivers/clk/tegra/clk-pll.c
> +++ b/drivers/clk/tegra/clk-pll.c
> @@ -1151,6 +1151,8 @@ static const struct clk_ops tegra_clk_pllu_ops = {
>  	.enable = clk_pllu_enable,
>  	.disable = clk_pll_disable,
>  	.recalc_rate = clk_pll_recalc_rate,
> +	.round_rate = clk_pll_round_rate,
> +	.set_rate = clk_pll_set_rate,
>  };
>  
>  static int _pll_fixed_mdiv(struct tegra_clk_pll_params *pll_params,
> 

Tegra's USB PHY driver only enables clock and clk driver doesn't specify the
clock rate in the init table. Could you please clarify where in the kernels code
PLL_U rate is getting set?