[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2043407.cqGGRsJjYq@jernej-laptop>
Date: Mon, 26 Feb 2018 17:19:58 +0100
From: Jernej Škrabec <jernej.skrabec@...l.net>
To: Maxime Ripard <maxime.ripard@...tlin.com>
Cc: wens@...e.org, airlied@...ux.ie, robh+dt@...nel.org,
mark.rutland@....com, mturquette@...libre.com, sboyd@...nel.org,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH 08/15] drm/sun4i: Fix polarity configuration for DW HDMI PHY
Hi,
Dne ponedeljek, 26. februar 2018 ob 10:39:30 CET je Maxime Ripard napisal(a):
> Hi,
>
> On Sat, Feb 24, 2018 at 10:45:38PM +0100, Jernej Skrabec wrote:
> > Current polarity configuration code is cleary wrong since it compares
> > same flag two times. However, even if flag name is fixed, it won't work
> > well for resolutions which have one polarity positive and another
> > negative.
> >
> > Fix that by properly set each bit according to each polarity. Since
> > those two bits are not described in any documentation, relationships
> > were obtained by experimentation.
> >
> > Fixes: b7c7436a5ff0 ("drm/sun4i: Implement A83T HDMI driver")
> >
> > Signed-off-by: Jernej Skrabec <jernej.skrabec@...l.net>
> > ---
> >
> > drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c | 9 +++++----
> > 1 file changed, 5 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> > b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c index e5bfcdd43ec9..f48e8b70fabe
> > 100644
> > --- a/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> > +++ b/drivers/gpu/drm/sun4i/sun8i_hdmi_phy.c
> > @@ -35,10 +35,11 @@ static int sun8i_hdmi_phy_config(struct dw_hdmi *hdmi,
> > void *data,>
> > struct sun8i_hdmi_phy *phy = (struct sun8i_hdmi_phy *)data;
> > u32 val = 0;
> >
> > - if ((mode->flags & DRM_MODE_FLAG_NHSYNC) &&
> > - (mode->flags & DRM_MODE_FLAG_NHSYNC)) {
> > - val = 0x03;
> > - }
> > + if (mode->flags & DRM_MODE_FLAG_NHSYNC)
> > + val |= 0x01;
> > +
> > + if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> > + val |= 0x02;
>
> Can you introduce defines for those?
Of course.
Best regards,
Jernej
Powered by blists - more mailing lists