[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1519719639.3402.2.camel@pengutronix.de>
Date: Tue, 27 Feb 2018 09:20:39 +0100
From: Philipp Zabel <p.zabel@...gutronix.de>
To: Yong Deng <yong.deng@...ewell.com>,
Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Chen-Yu Tsai <wens@...e.org>,
"David S. Miller" <davem@...emloft.net>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Linus Walleij <linus.walleij@...aro.org>,
Randy Dunlap <rdunlap@...radead.org>,
Hans Verkuil <hans.verkuil@...co.com>,
Stanimir Varbanov <stanimir.varbanov@...aro.org>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Arnd Bergmann <arnd@...db.de>,
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@...renesas.com>,
Yannick Fertre <yannick.fertre@...com>,
Sakari Ailus <sakari.ailus@...ux.intel.com>,
Todor Tomov <todor.tomov@...aro.org>,
linux-media@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-sunxi@...glegroups.com
Subject: Re: [PATCH v8 1/2] dt-bindings: media: Add Allwinner V3s Camera
Sensor Interface (CSI)
On Tue, 2018-02-27 at 10:07 +0800, Yong Deng wrote:
> Add binding documentation for Allwinner V3s CSI.
>
> Acked-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
> Acked-by: Sakari Ailus <sakari.ailus@...ux.intel.com>
> Reviewed-by: Rob Herring <robh@...nel.org>
> Signed-off-by: Yong Deng <yong.deng@...ewell.com>
> ---
> .../devicetree/bindings/media/sun6i-csi.txt | 59 ++++++++++++++++++++++
> 1 file changed, 59 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/sun6i-csi.txt
>
> diff --git a/Documentation/devicetree/bindings/media/sun6i-csi.txt b/Documentation/devicetree/bindings/media/sun6i-csi.txt
> new file mode 100644
> index 000000000000..2ff47a9507a6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/sun6i-csi.txt
> @@ -0,0 +1,59 @@
> +Allwinner V3s Camera Sensor Interface
> +-------------------------------------
> +
> +Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2
> +interface and CSI1 is used for parallel interface.
> +
> +Required properties:
> + - compatible: value must be "allwinner,sun8i-v3s-csi"
> + - reg: base address and size of the memory-mapped region.
> + - interrupts: interrupt associated to this IP
> + - clocks: phandles to the clocks feeding the CSI
> + * bus: the CSI interface clock
> + * mod: the CSI module clock
> + * ram: the CSI DRAM clock
> + - clock-names: the clock names mentioned above
> + - resets: phandles to the reset line driving the CSI
> +
> +Each CSI node should contain one 'port' child node with one child 'endpoint'
> +node, according to the bindings defined in
> +Documentation/devicetree/bindings/media/video-interfaces.txt. As mentioned
> +above, the endpoint's bus type should be MIPI CSI-2 for CSI0 and parallel or
> +Bt656 for CSI1.
> +
> +Endpoint node properties for CSI1
> +---------------------------------
> +
> +- remote-endpoint : (required) a phandle to the bus receiver's endpoint
> + node
> +- bus-width: : (required) must be 8, 10, 12 or 16
> +- pclk-sample : (optional) (default: sample on falling edge)
It would be helpful to state that 1 is rising edge and 0 is falling
edge, see for example ov5640.txt
regards
Philipp
Powered by blists - more mailing lists