| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1519740422-3835-14-git-send-email-sricharan@codeaurora.org>
Date: Tue, 27 Feb 2018 19:37:00 +0530
From: Sricharan R <sricharan@...eaurora.org>
To: viresh.kumar@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
mturquette@...libre.com, sboyd@...eaurora.org,
linux@...linux.org.uk, andy.gross@...aro.org,
david.brown@...aro.org, rjw@...ysocki.net,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
linux-pm@...r.kernel.org, robh@...nel.org,
sricharan@...eaurora.org, linux@....linux.org.uk
Subject: [PATCH v8 13/15] clk: qcom: Add safe switch hook for krait mux clocks
When the Hfplls are reprogrammed during the rate change,
the primary muxes which are sourced from the same hfpll
for higher frequencies, needs to be switched to the 'safe
secondary mux' as the parent for that small window. This
is done by registering a clk notifier for the muxes and
switching to the safe parent in the PRE_RATE_CHANGE notifier
and back to the original parent in the POST_RATE_CHANGE notifier.
Signed-off-by: Sricharan R <sricharan@...eaurora.org>
---
drivers/clk/qcom/clk-krait.c | 2 ++
drivers/clk/qcom/clk-krait.h | 3 +++
drivers/clk/qcom/krait-cc.c | 56 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 61 insertions(+)
diff --git a/drivers/clk/qcom/clk-krait.c b/drivers/clk/qcom/clk-krait.c
index 2e41767..ac2e020 100644
--- a/drivers/clk/qcom/clk-krait.c
+++ b/drivers/clk/qcom/clk-krait.c
@@ -50,6 +50,8 @@ static int krait_mux_set_parent(struct clk_hw *hw, u8 index)
if (__clk_is_enabled(hw->clk))
__krait_mux_set_sel(mux, sel);
+ mux->reparent = true;
+
return 0;
}
diff --git a/drivers/clk/qcom/clk-krait.h b/drivers/clk/qcom/clk-krait.h
index 71890bc..986f356 100644
--- a/drivers/clk/qcom/clk-krait.h
+++ b/drivers/clk/qcom/clk-krait.h
@@ -13,6 +13,9 @@ struct krait_mux_clk {
u32 shift;
u32 en_mask;
bool lpl;
+ u8 safe_sel;
+ u8 old_index;
+ bool reparent;
struct clk_hw hw;
struct notifier_block clk_nb;
diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c
index 7c9dfb0..4d4b657 100644
--- a/drivers/clk/qcom/krait-cc.c
+++ b/drivers/clk/qcom/krait-cc.c
@@ -26,6 +26,49 @@
0,
};
+/*
+ * Notifier function for switching the muxes to safe parent
+ * while the hfpll is getting reprogrammed.
+ */
+static int krait_notifier_cb(struct notifier_block *nb,
+ unsigned long event,
+ void *data)
+{
+ int ret = 0;
+ struct krait_mux_clk *mux = container_of(nb, struct krait_mux_clk,
+ clk_nb);
+ /* Switch to safe parent */
+ if (event == PRE_RATE_CHANGE) {
+ mux->old_index = krait_mux_clk_ops.get_parent(&mux->hw);
+ ret = krait_mux_clk_ops.set_parent(&mux->hw, mux->safe_sel);
+ mux->reparent = false;
+ /*
+ * By the time POST_RATE_CHANGE notifier is called,
+ * clk framework itself would have changed the parent for the new rate.
+ * Only otherwise, put back to the old parent.
+ */
+ } else if (event == POST_RATE_CHANGE) {
+ if (!mux->reparent)
+ ret = krait_mux_clk_ops.set_parent(&mux->hw,
+ mux->old_index);
+ }
+
+ return notifier_from_errno(ret);
+}
+
+static int krait_notifier_register(struct device *dev, struct clk *clk,
+ struct krait_mux_clk *mux)
+{
+ int ret = 0;
+
+ mux->clk_nb.notifier_call = krait_notifier_cb;
+ ret = clk_notifier_register(clk, &mux->clk_nb);
+ if (ret)
+ dev_err(dev, "failed to register clock notifier: %d\n", ret);
+
+ return ret;
+}
+
static int
krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
{
@@ -70,6 +113,7 @@
krait_add_sec_mux(struct device *dev, int id, const char *s,
unsigned int offset, bool unique_aux)
{
+ int ret;
struct krait_mux_clk *mux;
static const char *sec_mux_list[] = {
"acpu_aux",
@@ -93,6 +137,7 @@
mux->shift = 2;
mux->parent_map = sec_mux_map;
mux->hw.init = &init;
+ mux->safe_sel = 0;
init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
if (!init.name)
@@ -108,6 +153,11 @@
clk = devm_clk_register(dev, &mux->hw);
+ ret = krait_notifier_register(dev, clk, mux);
+ if (ret)
+ goto unique_aux;
+
+unique_aux:
if (unique_aux)
kfree(sec_mux_list[0]);
err_aux:
@@ -119,6 +169,7 @@
krait_add_pri_mux(struct device *dev, int id, const char *s,
unsigned int offset)
{
+ int ret;
struct krait_mux_clk *mux;
const char *p_names[3];
struct clk_init_data init = {
@@ -139,6 +190,7 @@
mux->lpl = id >= 0;
mux->parent_map = pri_mux_map;
mux->hw.init = &init;
+ mux->safe_sel = 2;
init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
if (!init.name)
@@ -164,6 +216,10 @@
clk = devm_clk_register(dev, &mux->hw);
+ ret = krait_notifier_register(dev, clk, mux);
+ if (ret)
+ goto err_p3;
+err_p3:
kfree(p_names[2]);
err_p2:
kfree(p_names[1]);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists