[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180228050803.GB20745@leoy-ThinkPad-T440>
Date: Wed, 28 Feb 2018 13:08:04 +0800
From: Leo Yan <leo.yan@...aro.org>
To: Wei Xu <xuwei5@...ilicon.com>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@...aro.org>,
Kevin Wang <jean.wangtao@...aro.org>,
Vincent Guittot <vincent.guittot@...aro.org>
Subject: Re: [PATCH] arm64: dts: Hi3660: Remove 'CPU_NAP' idle state
Hi Wei,
On Tue, Jan 09, 2018 at 12:32:42PM +0800, Leo Yan wrote:
> Thanks a lot for Vincent Guittot careful work to find bug for 'CPU_NAP'
> idle state. At early time, the CPU CA73 CPU_NAP idle state has been
> supported on Hikey960. Later we found the system has the hang issue
> and for resolving this issue Hisilicon released new MCU firmware, but
> unfortunately the new MCU firmware has side effect and results in the
> CA73 CPU cannot really enter CPU_NAP state and roll back to WFI state.
>
> After discussion we cannot see the possibility to enable CA73 CPU_NAP
> state anymore on Hikey960, based on this conclusion we should remove
> this state from DT binding.
>
> Cc: Daniel Lezcano <daniel.lezcano@...aro.org>
> Cc: Kevin Wang <jean.wangtao@...aro.org>
> Cc: Vincent Guittot <vincent.guittot@...aro.org>
> Signed-off-by: Leo Yan <leo.yan@...aro.org>
Could you help to pick up this patch? Thanks!
> ---
> arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 32 ++++---------------------------
> 1 file changed, 4 insertions(+), 28 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> index ab0b95b..8fddf0d 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
> @@ -96,11 +96,7 @@
> reg = <0x0 0x100>;
> enable-method = "psci";
> next-level-cache = <&A73_L2>;
> - cpu-idle-states = <
> - &CPU_NAP
> - &CPU_SLEEP
> - &CLUSTER_SLEEP_1
> - >;
> + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
> };
>
> cpu5: cpu@101 {
> @@ -109,11 +105,7 @@
> reg = <0x0 0x101>;
> enable-method = "psci";
> next-level-cache = <&A73_L2>;
> - cpu-idle-states = <
> - &CPU_NAP
> - &CPU_SLEEP
> - &CLUSTER_SLEEP_1
> - >;
> + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
> };
>
> cpu6: cpu@102 {
> @@ -122,11 +114,7 @@
> reg = <0x0 0x102>;
> enable-method = "psci";
> next-level-cache = <&A73_L2>;
> - cpu-idle-states = <
> - &CPU_NAP
> - &CPU_SLEEP
> - &CLUSTER_SLEEP_1
> - >;
> + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
> };
>
> cpu7: cpu@103 {
> @@ -135,24 +123,12 @@
> reg = <0x0 0x103>;
> enable-method = "psci";
> next-level-cache = <&A73_L2>;
> - cpu-idle-states = <
> - &CPU_NAP
> - &CPU_SLEEP
> - &CLUSTER_SLEEP_1
> - >;
> + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>;
> };
>
> idle-states {
> entry-method = "psci";
>
> - CPU_NAP: cpu-nap {
> - compatible = "arm,idle-state";
> - arm,psci-suspend-param = <0x0000001>;
> - entry-latency-us = <7>;
> - exit-latency-us = <2>;
> - min-residency-us = <15>;
> - };
> -
> CPU_SLEEP: cpu-sleep {
> compatible = "arm,idle-state";
> local-timer-stop;
> --
> 2.7.4
>
Powered by blists - more mailing lists