[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1519824270-7134-2-git-send-email-fabien.dessenne@st.com>
Date: Wed, 28 Feb 2018 14:24:29 +0100
From: Fabien Dessenne <fabien.dessenne@...com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
Jassi Brar <jassisinghbrar@...il.com>,
"Ludovic Barre" <ludovic.barre@...com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
CC: Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Loic Pallardy <loic.pallardy@...com>,
Arnaud Pouliquen <arnaud.pouliquen@...com>
Subject: [PATCH 1/2] dt-bindings: mailbox: add STMicroelectronics STM32 IPCC binding
Add a binding for the STMicroelectronics STM32 IPCC block exposing a
mailbox mechanism between two processors.
Signed-off-by: Fabien Dessenne <fabien.dessenne@...com>
Signed-off-by: Ludovic Barre <ludovic.barre@...com>
---
.../devicetree/bindings/mailbox/stm32-ipcc.txt | 48 ++++++++++++++++++++++
1 file changed, 48 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
diff --git a/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt b/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
new file mode 100644
index 0000000..2321689
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
@@ -0,0 +1,48 @@
+* STMicroelectronics STM32 IPCC (Inter-Processor Communication Controller)
+
+The IPCC block provides a non blocking signaling mechanism to post and
+retrieve messages in an atomic way between two processors.
+It provides the signaling for N bidirectionnal channels. The number of channels
+(N) can be read from a dedicated register.
+
+Required properties:
+- compatible: Must be "st,stm32-ipcc"
+- reg: Register address range (base address and length)
+- st,proc_id: Processor id using the mailbox (0 or 1)
+- clocks: Input clock
+- interrupt-names: List of names for the interrupts described by the interrupt
+ property. Must contain the following entries:
+ - "rx"
+ - "tx"
+- interrupts: Interrupt specifiers for "rx channel occupied" and "tx channel
+ free"
+- #mbox-cells: Number of cells required for the mailbox specifier. Must be 1.
+ The data contained in the mbox specifier of the "mboxes"
+ property in the client node is the mailbox channel index.
+
+Optional properties:
+- wakeup-source: Flag to indicate whether this device can wake up the system
+- interrupts: Wakeup interrupt used to wake up the system.
+- interrupt-names: "wakeup" for the wakeup interrupt.
+
+
+
+Example:
+ ipcc: mailbox@...01000 {
+ compatible = "st,stm32-ipcc";
+ #mbox-cells = <1>;
+ reg = <0x4c001000 0x400>;
+ st,proc_id = <0>;
+ interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
+ <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
+ <&aiec 62 1>;
+ interrupt-names = "rx", "tx", "wakeup";
+ clocks = <&rcc_clk IPCC>;
+ wakeup-source;
+ }
+
+Client:
+ mbox_test {
+ ...
+ mboxes = <&ipcc 0>, <&ipcc 1>;
+ };
--
2.7.4
Powered by blists - more mailing lists