| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180301174941.GG13722@bhelgaas-glaptop.roam.corp.google.com>
Date: Thu, 1 Mar 2018 11:49:41 -0600
From: Bjorn Helgaas <helgaas@...nel.org>
To: Logan Gunthorpe <logang@...tatee.com>
Cc: linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
linux-nvme@...ts.infradead.org, linux-rdma@...r.kernel.org,
linux-nvdimm@...ts.01.org, linux-block@...r.kernel.org,
Stephen Bates <sbates@...thlin.com>,
Christoph Hellwig <hch@....de>, Jens Axboe <axboe@...nel.dk>,
Keith Busch <keith.busch@...el.com>,
Sagi Grimberg <sagi@...mberg.me>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Jason Gunthorpe <jgg@...lanox.com>,
Max Gurtovoy <maxg@...lanox.com>,
Dan Williams <dan.j.williams@...el.com>,
Jérôme Glisse <jglisse@...hat.com>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Alex Williamson <alex.williamson@...hat.com>
Subject: Re: [PATCH v2 03/10] PCI/P2PDMA: Add PCI p2pmem dma mappings to
adjust the bus offset
On Wed, Feb 28, 2018 at 04:39:59PM -0700, Logan Gunthorpe wrote:
> The DMA address used when mapping PCI P2P memory must be the PCI bus
> address. Thus, introduce pci_p2pmem_[un]map_sg() to map the correct
> addresses when using P2P memory.
>
> For this, we assume that an SGL passed to these functions contain all
> p2p memory or no p2p memory.
>
> Signed-off-by: Logan Gunthorpe <logang@...tatee.com>
> ---
> drivers/pci/p2pdma.c | 51 ++++++++++++++++++++++++++++++++++++++++++++++
> include/linux/memremap.h | 1 +
> include/linux/pci-p2pdma.h | 13 ++++++++++++
> 3 files changed, 65 insertions(+)
>
> diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c
> index a57df78f6a32..4e1c81f64b29 100644
> --- a/drivers/pci/p2pdma.c
> +++ b/drivers/pci/p2pdma.c
> @@ -188,6 +188,8 @@ int pci_p2pdma_add_resource(struct pci_dev *pdev, int bar, size_t size,
> pgmap->res.flags = pci_resource_flags(pdev, bar);
> pgmap->ref = &pdev->p2pdma->devmap_ref;
> pgmap->type = MEMORY_DEVICE_PCI_P2PDMA;
> + pgmap->pci_p2pdma_bus_offset = pci_bus_address(pdev, bar) -
> + pci_resource_start(pdev, bar);
>
> addr = devm_memremap_pages(&pdev->dev, pgmap);
> if (IS_ERR(addr))
> @@ -616,3 +618,52 @@ void pci_p2pmem_publish(struct pci_dev *pdev, bool publish)
> pdev->p2pdma->published = publish;
> }
> EXPORT_SYMBOL_GPL(pci_p2pmem_publish);
> +
> +/*
> + * pci_p2pdma_map_sg - map a PCI peer-to-peer sg for DMA
> + * @dev: device doing the DMA request
> + * @sg: scatter list to map
> + * @nents: elements in the scatterlist
> + * @dir: DMA direction
Can you fix these so the descriptions all have a single space after
the "@dev:", which seems to be the existing convention in this file?
The indentation looks pretty random now.
> + *
> + * Returns the number of SG entries mapped
> + */
> +int pci_p2pdma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
> + enum dma_data_direction dir)
Same question as before about why the mixture of "pci_*" interfaces
that take "struct device *" parameters.
> +{
> + struct dev_pagemap *pgmap;
> + struct scatterlist *s;
> + phys_addr_t paddr;
> + int i;
> +
> + /*
> + * p2pdma mappings are not compatible with devices that use
> + * dma_virt_ops.
> + */
> + if (IS_ENABLED(CONFIG_DMA_VIRT_OPS) && dev->dma_ops == &dma_virt_ops)
> + return 0;
> +
> + for_each_sg(sg, s, nents, i) {
> + pgmap = sg_page(s)->pgmap;
> + paddr = sg_phys(s);
> +
> + s->dma_address = paddr - pgmap->pci_p2pdma_bus_offset;
> + sg_dma_len(s) = s->length;
> + }
> +
> + return nents;
> +}
> +EXPORT_SYMBOL_GPL(pci_p2pdma_map_sg);
> +
> +/**
> + * pci_p2pdma_unmap_sg - unmap a PCI peer-to-peer sg for DMA
> + * @dev: device doing the DMA request
> + * @sg: scatter list to map
> + * @nents: elements in the scatterlist
> + * @dir: DMA direction
Same whitespace comment as above.
> + */
> +void pci_p2pdma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
> + enum dma_data_direction dir)
> +{
> +}
> +EXPORT_SYMBOL_GPL(pci_p2pdma_unmap_sg);
> diff --git a/include/linux/memremap.h b/include/linux/memremap.h
> index 9e907c338a44..1660f64ce96f 100644
> --- a/include/linux/memremap.h
> +++ b/include/linux/memremap.h
> @@ -125,6 +125,7 @@ struct dev_pagemap {
> struct device *dev;
> void *data;
> enum memory_type type;
> + u64 pci_p2pdma_bus_offset;
> };
>
> #ifdef CONFIG_ZONE_DEVICE
> diff --git a/include/linux/pci-p2pdma.h b/include/linux/pci-p2pdma.h
> index c0dde3d3aac4..126eca697ab3 100644
> --- a/include/linux/pci-p2pdma.h
> +++ b/include/linux/pci-p2pdma.h
> @@ -36,6 +36,10 @@ int pci_p2pmem_alloc_sgl(struct pci_dev *pdev, struct scatterlist **sgl,
> void pci_p2pmem_free_sgl(struct pci_dev *pdev, struct scatterlist *sgl,
> unsigned int nents);
> void pci_p2pmem_publish(struct pci_dev *pdev, bool publish);
> +int pci_p2pdma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
> + enum dma_data_direction dir);
> +void pci_p2pdma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
> + enum dma_data_direction dir);
> #else /* CONFIG_PCI_P2PDMA */
> static inline int pci_p2pdma_add_resource(struct pci_dev *pdev, int bar,
> size_t size, u64 offset)
> @@ -83,5 +87,14 @@ static inline void pci_p2pmem_free_sgl(struct pci_dev *pdev,
> static inline void pci_p2pmem_publish(struct pci_dev *pdev, bool publish)
> {
> }
> +static inline int pci_p2pdma_map_sg(struct device *dev,
> + struct scatterlist *sg, int nents, enum dma_data_direction dir)
> +{
> + return 0;
> +}
> +static inline void pci_p2pdma_unmap_sg(struct device *dev,
> + struct scatterlist *sg, int nents, enum dma_data_direction dir)
> +{
> +}
> #endif /* CONFIG_PCI_P2PDMA */
> #endif /* _LINUX_PCI_P2P_H */
> --
> 2.11.0
>
Powered by blists - more mailing lists