[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180302084504.072174231@linuxfoundation.org>
Date: Fri, 2 Mar 2018 09:50:08 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Andreas Platschek <andreas.platschek@...ntech.at>,
Vinod Koul <vinod.koul@...el.com>,
Sasha Levin <alexander.levin@...izon.com>
Subject: [PATCH 4.14 005/115] dmaengine: fsl-edma: disable clks on all error paths
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andreas Platschek <andreas.platschek@...ntech.at>
[ Upstream commit 2610acf46b9ed528ec2cacd717bc9d354e452b73 ]
Previously enabled clks are only disabled if clk_prepare_enable() fails.
However, there are other error paths were the previously enabled
clocks are not disabled.
To fix the problem, fsl_disable_clocks() now takes the number of clocks
that shall be disabled + unprepared. For existing calls were all clocks
were already successfully prepared + enabled, DMAMUX_NR is passed to
disable + unprepare all clocks.
In error paths were only some clocks were successfully prepared +
enabled the loop counter is passed, in order to disable + unprepare
all successfully prepared + enabled clocks.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Andreas Platschek <andreas.platschek@...ntech.at>
Signed-off-by: Vinod Koul <vinod.koul@...el.com>
Signed-off-by: Sasha Levin <alexander.levin@...izon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/dma/fsl-edma.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
--- a/drivers/dma/fsl-edma.c
+++ b/drivers/dma/fsl-edma.c
@@ -863,11 +863,11 @@ static void fsl_edma_irq_exit(
}
}
-static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma)
+static void fsl_disable_clocks(struct fsl_edma_engine *fsl_edma, int nr_clocks)
{
int i;
- for (i = 0; i < DMAMUX_NR; i++)
+ for (i = 0; i < nr_clocks; i++)
clk_disable_unprepare(fsl_edma->muxclk[i]);
}
@@ -904,25 +904,25 @@ static int fsl_edma_probe(struct platfor
res = platform_get_resource(pdev, IORESOURCE_MEM, 1 + i);
fsl_edma->muxbase[i] = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(fsl_edma->muxbase[i]))
+ if (IS_ERR(fsl_edma->muxbase[i])) {
+ /* on error: disable all previously enabled clks */
+ fsl_disable_clocks(fsl_edma, i);
return PTR_ERR(fsl_edma->muxbase[i]);
+ }
sprintf(clkname, "dmamux%d", i);
fsl_edma->muxclk[i] = devm_clk_get(&pdev->dev, clkname);
if (IS_ERR(fsl_edma->muxclk[i])) {
dev_err(&pdev->dev, "Missing DMAMUX block clock.\n");
+ /* on error: disable all previously enabled clks */
+ fsl_disable_clocks(fsl_edma, i);
return PTR_ERR(fsl_edma->muxclk[i]);
}
ret = clk_prepare_enable(fsl_edma->muxclk[i]);
- if (ret) {
- /* disable only clks which were enabled on error */
- for (; i >= 0; i--)
- clk_disable_unprepare(fsl_edma->muxclk[i]);
-
- dev_err(&pdev->dev, "DMAMUX clk block failed.\n");
- return ret;
- }
+ if (ret)
+ /* on error: disable all previously enabled clks */
+ fsl_disable_clocks(fsl_edma, i);
}
@@ -976,7 +976,7 @@ static int fsl_edma_probe(struct platfor
if (ret) {
dev_err(&pdev->dev,
"Can't register Freescale eDMA engine. (%d)\n", ret);
- fsl_disable_clocks(fsl_edma);
+ fsl_disable_clocks(fsl_edma, DMAMUX_NR);
return ret;
}
@@ -985,7 +985,7 @@ static int fsl_edma_probe(struct platfor
dev_err(&pdev->dev,
"Can't register Freescale eDMA of_dma. (%d)\n", ret);
dma_async_device_unregister(&fsl_edma->dma_dev);
- fsl_disable_clocks(fsl_edma);
+ fsl_disable_clocks(fsl_edma, DMAMUX_NR);
return ret;
}
@@ -1015,7 +1015,7 @@ static int fsl_edma_remove(struct platfo
fsl_edma_cleanup_vchan(&fsl_edma->dma_dev);
of_dma_controller_free(np);
dma_async_device_unregister(&fsl_edma->dma_dev);
- fsl_disable_clocks(fsl_edma);
+ fsl_disable_clocks(fsl_edma, DMAMUX_NR);
return 0;
}
Powered by blists - more mailing lists