[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <0666b792-1f01-8138-7a6f-f98f9de95348@micronovasrl.com>
Date: Fri, 2 Mar 2018 12:43:59 +0100
From: Giulio Benetti <giulio.benetti@...ronovasrl.com>
To: Maxime Ripard <maxime.ripard@...tlin.com>
Cc: David Airlie <airlied@...ux.ie>, Chen-Yu Tsai <wens@...e.org>,
linux-arm-kernel@...ts.infradead.org,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] drm/sun4i: Handle DRM_BUS_FLAG_PIXDATA_*EDGE
Hi,
Il 01/03/2018 10:39, Maxime Ripard ha scritto:
> On Wed, Feb 28, 2018 at 05:14:52PM +0100, Giulio Benetti wrote:
>> Handle both positive and negative dclk polarity,
>> according to bus_flags.
>>
>> Signed-off-by: Giulio Benetti <giulio.benetti@...ronovasrl.com>
>> ---
>> drivers/gpu/drm/sun4i/sun4i_tcon.c | 13 ++++++++++++-
>> 1 file changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
>> index aaf911a..534e5ee 100644
>> --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
>> +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
>> @@ -17,6 +17,7 @@
>> #include <drm/drm_encoder.h>
>> #include <drm/drm_modes.h>
>> #include <drm/drm_of.h>
>> +#include <drm/drm_panel.h>
>>
>> #include <uapi/drm/drm_mode.h>
>>
>> @@ -340,6 +341,9 @@ static void sun4i_tcon0_mode_set_lvds(struct sun4i_tcon *tcon,
>> static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
>> const struct drm_display_mode *mode)
>> {
>> + struct drm_panel *panel = tcon->panel;
>> + struct drm_connector *connector = panel->connector;
>> + struct drm_display_info display_info = connector->display_info;
>> unsigned int bp, hsync, vsync;
>> u8 clk_delay;
>> u32 val = 0;
>> @@ -395,8 +399,15 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
>> if (mode->flags & DRM_MODE_FLAG_PVSYNC)
>> val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
>>
>> + if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_POSEDGE)
>> + clk_set_phase(tcon->dclk, 240);
>> +
>> + if (display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
>> + clk_set_phase(tcon->dclk, 0);
>> +
>
> This needs to have a whole bunch of comments here. We want to have
> basically the whole discussion we had by mail previously about this in
> there.
>
> And the same goes for your commit log.
Ok, I follow asap with V2 patch describing everything we told on
previous thread.
>
>> regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG,
>> - SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE,
>> + SUN4I_TCON0_IO_POL_HSYNC_POSITIVE |
>> + SUN4I_TCON0_IO_POL_VSYNC_POSITIVE,
>> val);
>
> This has nothing to do with your patch.
Yes, sorry, I've seen it now, I remove it on V2 patch
>
> Maxime
>
>
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
--
Giulio Benetti
CTO
MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642
Powered by blists - more mailing lists