[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <0d10e2ef-8b7a-3ec2-fb8b-ee72345cbbb1@micronovasrl.com>
Date: Fri, 2 Mar 2018 17:50:24 +0100
From: Giulio Benetti <giulio.benetti@...ronovasrl.com>
To: Maxime Ripard <maxime.ripard@...tlin.com>
Cc: David Airlie <airlied@...ux.ie>, Chen-Yu Tsai <wens@...e.org>,
dri-devel@...ts.freedesktop.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] drm/sun4i: add lvds mode_valid function
Hi,
Il 02/03/2018 15:37, Maxime Ripard ha scritto:
> On Fri, Mar 02, 2018 at 12:42:14PM +0100, Giulio Benetti wrote:
>> Hi,
>>
>> Il 01/03/2018 10:57, Maxime Ripard ha scritto:
>>> On Wed, Feb 28, 2018 at 06:53:52PM +0100, Giulio Benetti wrote:
>>>> static struct drm_connector_helper_funcs sun4i_lvds_con_helper_funcs = {
>>>> .get_modes = sun4i_lvds_get_modes,
>>>> + .mode_valid = sun4i_lvds_mode_valid,
>>>> };
>>>
>>> This should be on the encoder, not the connector.
>>
>> I've seen it is bound to connector in rgb and to encoder in hdmi.
>> Is it correct rgb mode_valid under connector funcs?
>> Otherwise I send a patch also for that one.
>
> This would need to be fixed as well. Bridges attach to encoder, not
> connectors, so if you ever have a bridge connected to the RGB output
> (like on the A13-Olinuxino), mode_valid isn't called at the moment.
Ok, I will do the same for rgb and submit a patchset,
need some time to test both lvds and rgb.
--
Giulio Benetti
CTO
MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642
Powered by blists - more mailing lists