| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180304014942.18727-11-masneyb@onstation.org>
Date: Sat, 3 Mar 2018 20:49:40 -0500
From: Brian Masney <masneyb@...tation.org>
To: jic23@...nel.org, linux-iio@...r.kernel.org
Cc: gregkh@...uxfoundation.org, devel@...verdev.osuosl.org,
knaack.h@....de, lars@...afoo.de, pmeerw@...erw.net,
linux-kernel@...r.kernel.org, Jon.Brenner@....com
Subject: [PATCH 10/12] staging: iio: tsl2x7x: make logging consistent and correct newlines
This patch updates all of the logging commands so that they are
consistent with the other messages, includes __func__ in the message,
and all of the messages include newlines.
This patch also removes some debug log messages from tsl2x7x_prox_cal().
Signed-off-by: Brian Masney <masneyb@...tation.org>
---
drivers/staging/iio/light/tsl2x7x.c | 58 ++++++++++++++++++++-----------------
1 file changed, 31 insertions(+), 27 deletions(-)
diff --git a/drivers/staging/iio/light/tsl2x7x.c b/drivers/staging/iio/light/tsl2x7x.c
index da7a4e025083..fb91c46c8747 100644
--- a/drivers/staging/iio/light/tsl2x7x.c
+++ b/drivers/staging/iio/light/tsl2x7x.c
@@ -378,7 +378,8 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
ret = i2c_smbus_read_byte_data(chip->client, reg);
if (ret < 0) {
dev_err(&chip->client->dev,
- "failed to read. err=%x\n", ret);
+ "%s: failed to read from register %x: %d\n",
+ __func__, reg, ret);
goto out_unlock;
}
@@ -424,7 +425,9 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
/* note: lux is 31 bit max at this point */
if (ch1lux > ch0lux) {
- dev_dbg(&chip->client->dev, "ch1lux > ch0lux-return last value\n");
+ dev_dbg(&chip->client->dev,
+ "%s: ch1lux > ch0lux; returning last value\n",
+ __func__);
ret = chip->als_cur_info.lux;
goto out_unlock;
}
@@ -600,7 +603,8 @@ static int tsl2x7x_als_calibrate(struct iio_dev *indio_dev)
chip->settings.als_gain_trim = ret;
dev_info(&chip->client->dev,
- "%s als_calibrate completed\n", chip->client->name);
+ "%s: %s ALS calibration successfully completed\n",
+ __func__, chip->client->name);
return ret;
}
@@ -644,7 +648,8 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
/* and make sure we're not already on */
if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) {
/* if forcing a register update - turn off, then on */
- dev_info(&chip->client->dev, "device is already enabled\n");
+ dev_info(&chip->client->dev, "%s: device is already enabled\n",
+ __func__);
return -EINVAL;
}
@@ -681,12 +686,14 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
*/
for (i = 0, dev_reg = chip->tsl2x7x_config;
i < TSL2X7X_MAX_CONFIG_REG; i++) {
- ret = i2c_smbus_write_byte_data(chip->client,
- TSL2X7X_CMD_REG + i,
+ int reg = TSL2X7X_CMD_REG + i;
+
+ ret = i2c_smbus_write_byte_data(chip->client, reg,
*dev_reg++);
if (ret < 0) {
dev_err(&chip->client->dev,
- "failed on write to reg %d.\n", i);
+ "%s: failed to write to register %x: %d\n",
+ __func__, reg, ret);
return ret;
}
}
@@ -708,7 +715,8 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev)
chip->tsl2x7x_chip_status = TSL2X7X_CHIP_WORKING;
if (chip->settings.interrupts_en != 0) {
- dev_info(&chip->client->dev, "Setting Up Interrupt(s)\n");
+ dev_info(&chip->client->dev, "%s: Setting up interrupt(s)\n",
+ __func__);
reg_val = TSL2X7X_CNTL_PWR_ON | TSL2X7X_CNTL_ADC_ENBL;
if (chip->settings.interrupts_en == 0x20 ||
@@ -819,8 +827,8 @@ static int tsl2x7x_prox_cal(struct iio_dev *indio_dev)
if (chip->settings.prox_max_samples_cal > MAX_SAMPLES_CAL) {
dev_err(&chip->client->dev,
- "max prox samples cal is too big: %d\n",
- chip->settings.prox_max_samples_cal);
+ "%s: prox_max_samples_cal %d is too big\n",
+ __func__, chip->settings.prox_max_samples_cal);
chip->settings.prox_max_samples_cal = MAX_SAMPLES_CAL;
}
@@ -845,8 +853,6 @@ static int tsl2x7x_prox_cal(struct iio_dev *indio_dev)
if (ret < 0)
return ret;
prox_history[i] = chip->prox_data;
- dev_info(&chip->client->dev, "2 i=%d prox data= %d\n",
- i, chip->prox_data);
}
ret = tsl2x7x_chip_off(indio_dev);
@@ -857,12 +863,6 @@ static int tsl2x7x_prox_cal(struct iio_dev *indio_dev)
chip->settings.prox_max_samples_cal, cal);
chip->settings.prox_thres_high = (cal->max << 1) - cal->mean;
- dev_info(&chip->client->dev, " cal min=%d mean=%d max=%d\n",
- cal->min, cal->mean, cal->max);
- dev_info(&chip->client->dev,
- "%s proximity threshold set to %d\n",
- chip->client->name, chip->settings.prox_thres_high);
-
/* back to the way they were */
chip->settings.interrupts_en = tmp_irq_settings;
if (current_state == TSL2X7X_CHIP_WORKING) {
@@ -1000,12 +1000,14 @@ static ssize_t in_illuminance0_lux_table_store(struct device *dev,
n = value[0];
if ((n % 3) || n < 6 ||
n > ((ARRAY_SIZE(chip->tsl2x7x_device_lux) - 1) * 3)) {
- dev_info(dev, "LUX TABLE INPUT ERROR 1 Value[0]=%d\n", n);
+ dev_info(dev, "%s: lux table input error 1. n=%d\n",
+ __func__, n);
return -EINVAL;
}
if ((value[(n - 2)] | value[(n - 1)] | value[n]) != 0) {
- dev_info(dev, "LUX TABLE INPUT ERROR 2 Value[0]=%d\n", n);
+ dev_info(dev, "%s: lux table input error 2. n=%d\n",
+ __func__, n);
return -EINVAL;
}
@@ -1150,14 +1152,14 @@ static int tsl2x7x_write_event_value(struct iio_dev *indio_dev,
chip->settings.persistence &= 0xF0;
chip->settings.persistence |=
(filter_delay & 0x0F);
- dev_info(&chip->client->dev, "%s: ALS persistence = %d",
+ dev_info(&chip->client->dev, "%s: ALS persistence = %d\n",
__func__, filter_delay);
} else {
chip->settings.persistence &= 0x0F;
chip->settings.persistence |=
((filter_delay << 4) & 0xF0);
dev_info(&chip->client->dev,
- "%s: Proximity persistence = %d",
+ "%s: Proximity persistence = %d\n",
__func__, filter_delay);
}
ret = 0;
@@ -1372,7 +1374,7 @@ static int tsl2x7x_write_raw(struct iio_dev *indio_dev,
chip->settings.als_time =
TSL2X7X_MAX_TIMER_CNT - (val2 / TSL2X7X_MIN_ITIME);
- dev_info(&chip->client->dev, "%s: als time = %d",
+ dev_info(&chip->client->dev, "%s: als time = %d\n",
__func__, chip->settings.als_time);
break;
default:
@@ -1738,8 +1740,9 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
ret = i2c_smbus_write_byte(clientp, TSL2X7X_CMD_REG | TSL2X7X_CNTRL);
if (ret < 0) {
- dev_err(&clientp->dev, "write to cmd reg failed. err = %d\n",
- ret);
+ dev_err(&clientp->dev,
+ "%s: Failed to write to CMD register: %d\n",
+ __func__, ret);
return ret;
}
@@ -1773,7 +1776,7 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
indio_dev);
if (ret) {
dev_err(&clientp->dev,
- "%s: irq request failed", __func__);
+ "%s: IRQ request failed\n", __func__);
return ret;
}
}
@@ -1790,7 +1793,8 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
return ret;
}
- dev_info(&clientp->dev, "%s Light sensor found.\n", id->name);
+ dev_info(&clientp->dev, "%s: %s Light sensor found.\n", __func__,
+ id->name);
return 0;
}
--
2.14.3
Powered by blists - more mailing lists