| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1520347148-27852-9-git-send-email-sricharan@codeaurora.org>
Date: Tue, 6 Mar 2018 20:09:01 +0530
From: Sricharan R <sricharan@...eaurora.org>
To: robh@...nel.org, viresh.kumar@...aro.org, mark.rutland@....com,
mturquette@...libre.com, sboyd@...eaurora.org,
linux@...linux.org.uk, andy.gross@...aro.org,
david.brown@...aro.org, rjw@...ysocki.net,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-soc@...r.kernel.org,
linux-pm@...r.kernel.org, linux@....linux.org.uk
Cc: sricharan@...eaurora.org
Subject: [PATCH v9 08/15] clk: qcom: Add support for Krait clocks
From: Stephen Boyd <sboyd@...eaurora.org>
The Krait clocks are made up of a series of muxes and a divider
that choose between a fixed rate clock and dedicated HFPLLs for
each CPU. Instead of using mmio accesses to remux parents, the
Krait implementation exposes the remux control via cp15
registers. Support these clocks.
Signed-off-by: Stephen Boyd <sboyd@...eaurora.org>
---
drivers/clk/qcom/Kconfig | 4 ++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-krait.c | 124 +++++++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-krait.h | 38 +++++++++++++
4 files changed, 167 insertions(+)
create mode 100644 drivers/clk/qcom/clk-krait.c
create mode 100644 drivers/clk/qcom/clk-krait.h
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index d9ae51e..bf14f56 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -234,3 +234,7 @@ config QCOM_HFPLL
Support for the high-frequency PLLs present on Qualcomm devices.
Say Y if you want to support CPU frequency scaling on devices
such as MSM8974, APQ8084, etc.
+
+config KRAIT_CLOCKS
+ bool
+ select KRAIT_L2_ACCESSORS
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index c57b808..e1e96f6 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -11,6 +11,7 @@ clk-qcom-y += clk-branch.o
clk-qcom-y += clk-regmap-divider.o
clk-qcom-y += clk-regmap-mux.o
clk-qcom-y += clk-regmap-mux-div.o
+clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o
clk-qcom-y += clk-hfpll.o
clk-qcom-y += reset.o
clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
diff --git a/drivers/clk/qcom/clk-krait.c b/drivers/clk/qcom/clk-krait.c
new file mode 100644
index 0000000..2e41767
--- /dev/null
+++ b/drivers/clk/qcom/clk-krait.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+#include <asm/krait-l2-accessors.h>
+
+#include "clk-krait.h"
+
+/* Secondary and primary muxes share the same cp15 register */
+static DEFINE_SPINLOCK(krait_clock_reg_lock);
+
+#define LPL_SHIFT 8
+static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel)
+{
+ unsigned long flags;
+ u32 regval;
+
+ spin_lock_irqsave(&krait_clock_reg_lock, flags);
+ regval = krait_get_l2_indirect_reg(mux->offset);
+ regval &= ~(mux->mask << mux->shift);
+ regval |= (sel & mux->mask) << mux->shift;
+ if (mux->lpl) {
+ regval &= ~(mux->mask << (mux->shift + LPL_SHIFT));
+ regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT);
+ }
+ krait_set_l2_indirect_reg(mux->offset, regval);
+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
+
+ /* Wait for switch to complete. */
+ mb();
+ udelay(1);
+}
+
+static int krait_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
+ u32 sel;
+
+ sel = clk_mux_reindex(index, mux->parent_map, 0);
+ mux->en_mask = sel;
+ /* Don't touch mux if CPU is off as it won't work */
+ if (__clk_is_enabled(hw->clk))
+ __krait_mux_set_sel(mux, sel);
+
+ return 0;
+}
+
+static u8 krait_mux_get_parent(struct clk_hw *hw)
+{
+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
+ u32 sel;
+
+ sel = krait_get_l2_indirect_reg(mux->offset);
+ sel >>= mux->shift;
+ sel &= mux->mask;
+ mux->en_mask = sel;
+
+ return clk_mux_get_parent(hw, sel, mux->parent_map, 0);
+}
+
+const struct clk_ops krait_mux_clk_ops = {
+ .set_parent = krait_mux_set_parent,
+ .get_parent = krait_mux_get_parent,
+ .determine_rate = __clk_mux_determine_rate_closest,
+};
+EXPORT_SYMBOL_GPL(krait_mux_clk_ops);
+
+/* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */
+static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2);
+ return DIV_ROUND_UP(*parent_rate, 2);
+}
+
+static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct krait_div2_clk *d = to_krait_div2_clk(hw);
+ unsigned long flags;
+ u32 val;
+ u32 mask = BIT(d->width) - 1;
+
+ if (d->lpl)
+ mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift;
+
+ spin_lock_irqsave(&krait_clock_reg_lock, flags);
+ val = krait_get_l2_indirect_reg(d->offset);
+ val &= ~mask;
+ krait_set_l2_indirect_reg(d->offset, val);
+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
+
+ return 0;
+}
+
+static unsigned long
+krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+ struct krait_div2_clk *d = to_krait_div2_clk(hw);
+ u32 mask = BIT(d->width) - 1;
+ u32 div;
+
+ div = krait_get_l2_indirect_reg(d->offset);
+ div >>= d->shift;
+ div &= mask;
+ div = (div + 1) * 2;
+
+ return DIV_ROUND_UP(parent_rate, div);
+}
+
+const struct clk_ops krait_div2_clk_ops = {
+ .round_rate = krait_div2_round_rate,
+ .set_rate = krait_div2_set_rate,
+ .recalc_rate = krait_div2_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(krait_div2_clk_ops);
diff --git a/drivers/clk/qcom/clk-krait.h b/drivers/clk/qcom/clk-krait.h
new file mode 100644
index 0000000..71890bc
--- /dev/null
+++ b/drivers/clk/qcom/clk-krait.h
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#ifndef __QCOM_CLK_KRAIT_H
+#define __QCOM_CLK_KRAIT_H
+
+#include <linux/clk-provider.h>
+
+struct krait_mux_clk {
+ unsigned int *parent_map;
+ u32 offset;
+ u32 mask;
+ u32 shift;
+ u32 en_mask;
+ bool lpl;
+
+ struct clk_hw hw;
+ struct notifier_block clk_nb;
+};
+
+#define to_krait_mux_clk(_hw) container_of(_hw, struct krait_mux_clk, hw)
+
+extern const struct clk_ops krait_mux_clk_ops;
+
+struct krait_div2_clk {
+ u32 offset;
+ u8 width;
+ u32 shift;
+ bool lpl;
+
+ struct clk_hw hw;
+};
+
+#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw)
+
+extern const struct clk_ops krait_div2_clk_ops;
+
+#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists