lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180307225042.2205-1-brad.mouring@ni.com>
Date:   Wed, 7 Mar 2018 16:50:42 -0600
From:   Brad Mouring <brad.mouring@...com>
To:     Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>
CC:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Brad Mouring <brad.mouring@...com>
Subject: [PATCH] net: phy: Move interrupt check from phy_check to phy_interrupt

If multiple phys share the same interrupt (e.g. a multi-phy chip),
the first device registered is the only one checked as phy_interrupt
will always return IRQ_HANDLED if the first phydev is not halted.
Move the interrupt check into phy_interrupt and, if it was not this
phydev, return IRQ_NONE to allow other devices on this irq a chance
to check if it was their interrupt.

Signed-off-by: Brad Mouring <brad.mouring@...com>
---
 drivers/net/phy/phy.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index e3e29c2b028b..ff1aa815568f 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -632,6 +632,12 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
 	if (PHY_HALTED == phydev->state)
 		return IRQ_NONE;		/* It can't be ours.  */
 
+	if (phy_interrupt_is_valid(phydev)) {
+		if (phydev->drv->did_interrupt &&
+			!phydev->drv->did_interrupt(phydev))
+			return IRQ_NONE;
+	}
+
 	phy_change(phydev);
 
 	return IRQ_HANDLED;
@@ -725,16 +731,6 @@ EXPORT_SYMBOL(phy_stop_interrupts);
  */
 void phy_change(struct phy_device *phydev)
 {
-	if (phy_interrupt_is_valid(phydev)) {
-		if (phydev->drv->did_interrupt &&
-		    !phydev->drv->did_interrupt(phydev))
-			return;
-
-		if (phydev->state == PHY_HALTED)
-			if (phy_disable_interrupts(phydev))
-				goto phy_err;
-	}
-
 	mutex_lock(&phydev->lock);
 	if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
 		phydev->state = PHY_CHANGELINK;
-- 
2.16.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ