linux-kernel - [PATCH v3 00/11] mmc: sdhci-omap: Add UHS/HS200 mode support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180307132020.30951-1-kishon@ti.com>
Date:   Wed, 7 Mar 2018 18:50:09 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Tony Lindgren <tony@...mide.com>,
        Adrian Hunter <adrian.hunter@...el.com>
CC:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Russell King <linux@...linux.org.uk>, <kishon@...com>,
        <linux-mmc@...r.kernel.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <linux-omap@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH v3 00/11] mmc: sdhci-omap: Add UHS/HS200 mode support

Add UHS/HS200 mode support in sdhci-omap. The programming sequence
for voltage switching, tuning is followed from AM572x TRM
http://www.ti.com/lit/ug/spruhz6i/spruhz6i.pdf
(Similar to all AM57x/DRA7x SoCs). The patch series also implements
workaround for errata published in
http://www.ti.com/lit/er/sprz429k/sprz429k.pdf

patches are created on top of
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git next

Patches in v2 already applied to mmc -next are dropped from the
series.

Changes from v2:
*) Changed SW timeout logic as per Adrians's suggestion
*) Validated SDIO with the current patches (added a couple of fixes
   found while adding SDIO support).
*) Used soc_device_match() instead of pdata-quirks as per Tony's
   suggestions.

Changes from v1:
*) Only poll on DAT0 and DATI for card_busy status
*) Cleanup iodelay patch as suggested by Tony.
*) Added quirk to disable HW timeout
*) Use the existing data timer but program a relatively accurate
   SW timeout value (Impacts all platforms)
*) Fix a bug in sdhci which was using data_timer for non data line
   commands

Kishon Vijay Abraham I (11):
  mmc: sdhci-omap: Fix when capabilities are obtained from
    SDHCI_CAPABILITIES reg
  mmc: sdhci-omap: Remove setting ADMA capability in driver
  mmc: sdhci-omap: Workaround for Errata i843
  mmc: sdhci-omap: Invoke sdhci_get_of_property to read sdhci dt
    properties
  mmc: sdhci: Disable HS200 mode if controller can't support 1.8v
  mmc: sdhci: Add quirk to disable HW timeout
  mmc: sdhci: Program a relatively accurate SW timeout value
  mmc: sdhci-omap: Workaround for Errata i834
  dt-bindings: sdhci-omap: Add K2G specific binding
  mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC
  mmc: sdhci-omap: Add sdhci_omap specific ops for enable_sdio_irq

 .../devicetree/bindings/mmc/sdhci-omap.txt         |  2 +
 drivers/mmc/host/sdhci-omap.c                      | 78 +++++++++++++++++++---
 drivers/mmc/host/sdhci.c                           | 75 +++++++++++++++++----
 drivers/mmc/host/sdhci.h                           | 15 +++++
 4 files changed, 148 insertions(+), 22 deletions(-)

-- 
2.11.0