linux-kernel - [PATCH 4.14 082/110] s390/qeth: fix IPA command submission race

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180307191050.321639195@linuxfoundation.org>
Date:   Wed,  7 Mar 2018 11:39:05 -0800
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Julian Wiedmann <jwi@...ux.vnet.ibm.com>,
        "David S. Miller" <davem@...emloft.net>
Subject: [PATCH 4.14 082/110] s390/qeth: fix IPA command submission race

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann <jwi@...ux.vnet.ibm.com>

[ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ]

If multiple IPA commands are build & sent out concurrently,
fill_ipacmd_header() may assign a seqno value to a command that's
different from what send_control_data() later assigns to this command's
reply.
This is due to other commands passing through send_control_data(),
and incrementing card->seqno.ipa along the way.

So one IPA command has no reply that's waiting for its seqno, while some
other IPA command has multiple reply objects waiting for it.
Only one of those waiting replies wins, and the other(s) times out and
triggers a recovery via send_ipa_cmd().

Fix this by making sure that the same seqno value is assigned to
a command and its reply object.
Do so immediately before submitting the command & while holding the
irq_pending "lock", to produce nicely ascending seqnos.

As a side effect, *all* IPA commands now use a reply object that's
waiting for its actual seqno. Previously, early IPA commands that were
submitted while the card was still DOWN used the "catch-all" IDX seqno.

Signed-off-by: Julian Wiedmann <jwi@...ux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/s390/net/qeth_core_main.c |   19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -2087,25 +2087,26 @@ int qeth_send_control_data(struct qeth_c
 	}
 	reply->callback = reply_cb;
 	reply->param = reply_param;
-	if (card->state == CARD_STATE_DOWN)
-		reply->seqno = QETH_IDX_COMMAND_SEQNO;
-	else
-		reply->seqno = card->seqno.ipa++;
+
 	init_waitqueue_head(&reply->wait_q);
-	spin_lock_irqsave(&card->lock, flags);
-	list_add_tail(&reply->list, &card->cmd_waiter_list);
-	spin_unlock_irqrestore(&card->lock, flags);
 	QETH_DBF_HEX(CTRL, 2, iob->data, QETH_DBF_CTRL_LEN);

 	while (atomic_cmpxchg(&card->write.irq_pending, 0, 1)) ;
-	qeth_prepare_control_data(card, len, iob);

 	if (IS_IPA(iob->data)) {
 		cmd = __ipa_cmd(iob);
+		cmd->hdr.seqno = card->seqno.ipa++;
+		reply->seqno = cmd->hdr.seqno;
 		event_timeout = QETH_IPA_TIMEOUT;
 	} else {
+		reply->seqno = QETH_IDX_COMMAND_SEQNO;
 		event_timeout = QETH_TIMEOUT;
 	}
+	qeth_prepare_control_data(card, len, iob);
+
+	spin_lock_irqsave(&card->lock, flags);
+	list_add_tail(&reply->list, &card->cmd_waiter_list);
+	spin_unlock_irqrestore(&card->lock, flags);

 	timeout = jiffies + event_timeout;

@@ -2896,7 +2897,7 @@ static void qeth_fill_ipacmd_header(stru
 	memset(cmd, 0, sizeof(struct qeth_ipa_cmd));
 	cmd->hdr.command = command;
 	cmd->hdr.initiator = IPA_CMD_INITIATOR_HOST;
-	cmd->hdr.seqno = card->seqno.ipa;
+	/* cmd->hdr.seqno is set by qeth_send_control_data() */
 	cmd->hdr.adapter_type = qeth_get_ipa_adp_type(card->info.link_type);
 	cmd->hdr.rel_adapter_no = (__u8) card->info.portno;
 	if (card->options.layer2)