linux-kernel - Re: [PATCH] ARM: dts: i.MX25: define SSI FIFO depth

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180308153832.GA28454@botnar.kaiser.cx>
Date:   Thu, 8 Mar 2018 16:38:32 +0100
From:   Martin Kaiser <martin@...ser.cx>
To:     Lothar Waßmann <LW@...O-electronics.de>
Cc:     Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Russell King <linux@...linux.org.uk>,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: dts: i.MX25: define SSI FIFO depth

Hi Lothar,

Thus wrote Lothar Waßmann (LW@...O-electronics.de):

> > diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
> > index 9725705..cf70df2 100644
> > --- a/arch/arm/boot/dts/imx25.dtsi
> > +++ b/arch/arm/boot/dts/imx25.dtsi
> > @@ -269,6 +269,7 @@
> >  				dmas = <&sdma 24 1 0>,
> >  				       <&sdma 25 1 0>;
> >  				dma-names = "rx", "tx";
> > +				fsl,fifo-depth = <15>;
> >  				status = "disabled";
> >  			};

> > @@ -329,6 +330,7 @@
> >  				dmas = <&sdma 28 1 0>,
> >  				       <&sdma 29 1 0>;
> >  				dma-names = "rx", "tx";
> > +				fsl,fifo-depth = <15>;
> >  				status = "disabled";
> >  			};

> You are changing the global .dtsi file. Did you test this change with
> all devices that are affected by it?

I changed the hardware description of the imx25 SSI to match the
reference manual.

I did test this change on an imx25 board with audio playback. This uses
the SSI description I modified. I verified that the driver is actually
taking the modified setting into account and that this causes no
problems.

As of today, this setting is used by the fsl_ssi driver to set the fifo
water level for dma requests.

Of course, I don't have access to the enitre range of supported imx25
boards and I don't think this is required for submitting patches.

Do you have any indication why this patch should not be merged?

Best regards,
Martin