[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180308165903.GM5799@atomide.com>
Date: Thu, 8 Mar 2018 08:59:03 -0800
From: Tony Lindgren <tony@...mide.com>
To: Pavel Machek <pavel@....cz>
Cc: pali.rohar@...il.com, sre@...nel.org,
kernel list <linux-kernel@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-omap@...r.kernel.org, khilman@...nel.org,
aaro.koskinen@....fi, ivo.g.dimitrov.75@...il.com,
patrikbachan@...il.com, serge@...lyn.com, abcloriens@...il.com,
clayton@...ftyguy.net, martijn@...xit.nl,
sakari.ailus@...ux.intel.com,
Filip Matijević <filip.matijevic.pz@...il.com>,
Suman Anna <s-anna@...com>
Subject: Re: Nokia N900: refcount_t underflow, use after free
* Pavel Machek <pavel@....cz> [180308 14:31]:
> Hi!
>
> I'm getting this warning... Has anyone seen/debugged that before?
> Unfortunately the backtrace does not seem to be too useful :-(.
Adding Suman to Cc, as it points to arm_iommu_release_mapping().
Regards,
Tony
> [ 0.000000] Booting Linux on physical CPU 0x0
> [ 0.000000] Linux version 4.16.0-rc3-next-20180302 (pavel@duo) (gcc
> version 4.7.2 (GC
> C)) #70 Fri Mar 2 10:16:00 CET 2018
> [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7),
> cr=10c5387d
> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT
> nonaliasing instruction cac
> ...
> [ 1.244140] omap3isp 480bc000.isp: 480bc000.isp supply vdd-csiphy2
> not found, using d
> ummy regulator
> [ 1.254089] omap3isp 480bc000.isp: Revision 2.0 found
> [ 1.260009] omap-iommu 480bd400.mmu: 480bd400.mmu: version 1.1
> [ 1.266693] ------------[ cut here ]------------
> [ 1.271606] WARNING: CPU: 0 PID: 1 at lib/refcount.c:187
> refcount_sub_and_test+0x94/0xa8
> [ 1.280181] refcount_t: underflow; use-after-free.
> [ 1.285247] Modules linked in:
> [ 1.288482] CPU: 0 PID: 1 Comm: swapper Not tainted
> 4.16.0-rc3-next-20180302 #70
> [ 1.296295] Hardware name: Nokia RX-51 board
> [ 1.300811] [<c010d6cc>] (unwind_backtrace) from [<c010b560>]
> (show_stack+0x10/0x14)
> [ 1.309020] [<c010b560>] (show_stack) from [<c0127dec>]
> (__warn+0xe8/0x110)
> [ 1.316375] [<c0127dec>] (__warn) from [<c0127edc>]
> (warn_slowpath_fmt+0x38/0x48)
> [ 1.324310] [<c0127edc>] (warn_slowpath_fmt) from [<c034e630>]
> (refcount_sub_and_test+0x94/0xa8)
> [ 1.333557] [<c034e630>] (refcount_sub_and_test) from [<c01109a8>]
> (arm_iommu_release_mapping+0x18/0x2c)
> [ 1.343597] [<c01109a8>] (arm_iommu_release_mapping) from
> [<c041752c>] (driver_probe_device+0x24c/0x314)
> [ 1.353637] [<c041752c>] (driver_probe_device) from [<c04176a0>]
> (__driver_attach+0xac/0xb0)
> [ 1.362548] [<c04176a0>] (__driver_attach) from [<c0415b94>]
> (bus_for_each_dev+0x58/0x7c)
> [ 1.371185] [<c0415b94>] (bus_for_each_dev) from [<c0416a14>]
> (bus_add_driver+0xe0/0x1f0)
> [ 1.379852] [<c0416a14>] (bus_add_driver) from [<c0417f10>]
> (driver_register+0x78/0xf4)
> [ 1.388305] [<c0417f10>] (driver_register) from [<c010257c>]
> (do_one_initcall+0x3c/0x16c)
> [ 1.396972] [<c010257c>] (do_one_initcall) from [<c0b00d5c>]
> (kernel_init_freeable+0xf8/0x1c4)
> [ 1.406066] [<c0b00d5c>] (kernel_init_freeable) from [<c071640c>]
> (kernel_init+0x8/0x108)
> [ 1.414703] [<c071640c>] (kernel_init) from [<c01010e8>]
> (ret_from_fork+0x14/0x2c)
> [ 1.422698] Exception stack(0xce049fb0 to 0xce049ff8)
> [ 1.428039] 9fa0: 00000000
> 00000000 00000000 00000000
> [ 1.436676] 9fc0: 00000000 00000000 00000000 00000000 00000000
> 00000000 00000000 00000000
> [ 1.445312] 9fe0: 00000000 00000000 00000000 00000000 00000013
> 00000000
> [ 1.452270] ---[ end trace dcb3a72772bbfe7a ]---
> [ 1.459045] ti-soc-thermal 48002524.bandgap: This OMAP thermal
> sensor is unreliable. You've been warned
> [ 1.469055] ti-soc-thermal 48002524.bandgap: Non-trimmed BGAP, Temp
> not accurate
> [ 1.476898] ti-soc-thermal 48002524.bandgap: thermal zone device is
> NULL
> [ 1.485198] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout
> 60 sec
> [ 1.495208] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Powered by blists - more mailing lists