| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180308112248.GA5918@gmail.com>
Date: Thu, 8 Mar 2018 12:22:49 +0100
From: Christian Brauner <christian.brauner@...onical.com>
To: "Eric W. Biederman" <ebiederm@...ssion.com>
Cc: linux-kernel@...r.kernel.org, torvalds@...ux-foundation.org
Subject: Re: Invalid /proc/<pid>/fd/{0,1,2} symlinks with TIOCGPTPEER
On Thu, Mar 08, 2018 at 09:22:29AM +0100, Christian Brauner wrote:
> On Wed, Mar 07, 2018 at 01:30:52PM -0600, Eric W. Biederman wrote:
> > Christian Brauner <christian.brauner@...onical.com> writes:
> >
> > > Hey,
> > >
> > > We discovered a potential bug in the devpts implementation via
> > > TIOCGPTPEER ioctl()s today. We've tackled a similar problem already in:
> > >
> > > commit 311fc65c9fb9c966bca8e6f3ff8132ce57344ab9
> > > Author: Eric W. Biederman <ebiederm@...ssion.com>
> > > Date: Thu Aug 24 15:13:29 2017 -0500
> > >
> > > pty: Repair TIOCGPTPEER
> > >
> > > Most libcs will *still* look at /dev/ptmx when opening the master fd of
> > > pty device. Usually, /dev/ptmx will nowadays be either a symlink to
> > > /dev/pts/ptmx or it will be a second device node with permissions 666
> > > whereas /dev/pts/ptmx will usually have permissions 000. Afaik, we've
> > > also always supported making /dev/ptmx a bind-mount to /dev/pts/ptmx or
> > > at least I haven't observed any issues with this so far and it's
> > > something fairly common in containers. So in short, it should be legal
> > > to do:
> > >
> > > mount --bind /dev/pts/ptmx /dev/ptmx
> > > chmod 666 /dev/ptmx
> > >
> > > However, for any libc implementation or program that uses TIOCGPTPEER
> > > the /proc/<pid>/fd/{0,1,2} symlinks are broken (currently affects at
> > > least glibc 2.27) with bind-mounts of /dev/pts/ptmx to /dev/ptmx. A
> > > quick reproducer is:
> > >
> > > unshare --mount
> > > mount --bind /dev/pts/ptmx /dev/ptmx
> > > chmod 666 /dev/ptmx
> > > script
> > > ls -al /proc/self/fd/0
> > >
> > > Let's assume the slave device index I received was 5 then I would expect to
> > > see:
> > >
> > > ls -al /proc/self/fd/0
> > > lrwx------ 1 chb chb 64 Mar 7 16:41 /proc/self/fd/0 -> /dev/pts/5
> > >
> > > But what I actually see is:
> > >
> > > ls -al /proc/self/fd/0
> > > lrwx------ 1 chb chb 64 Mar 7 16:41 /proc/self/fd/0 -> /
> > >
> > > I think the explanation for this is fairly straightforward. When
> > > userspace does:
> > >
> > > master = open("/dev/ptmx", O_RDWR | O_NOCTTY);
> > > slave = ioctl(master, TIOCGPTPEER, O_RDWR | O_NOCTTY);
> > >
> > > and /dev/ptmx is a bind-mount of /dev/pts/ptmx looking up the root mount
> > > of the dentry for the slave it appears to the kernel as if the dentry is
> > > escaping it's bind-mount:
> > >
> > > ├─/dev udev devtmpfs rw,nosuid,relatime,size=4001260k,nr_inodes=1000315,mode=755
> > > │ ├─/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
> > > │ └─/dev/ptmx devpts[/ptmx] devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
> > >
> > > since the root mount of the dentry is /dev/pts but the root mount of
> > > /dev/ptmx is /dev if I'm correct so similar to what Linus pointed out in
> > > a previous discussion (see [1]) before. So we still record the "wrong"
> > > vfsmount when /dev/ptmx is a bind-mount and then hit the problem when we
> > > call devpts_mntget() in drivers/tty/pty.c.
> >
> > I think your analysis of why we return / is correct. If the root of the
> > mount is a file (aka /dev/pts/ptmx). Then any other file will on that
> > mount will not be under the root of the mount, and will be displayed
> > as '/'. Because we have in fact escaped the root of the mount.
> >
> > I think this is more of a quality of implementation issue more than a
> > bug per se.
>
> It's at least a regression since this used to work before. :)
>
> >
> > > So I thought about this and - in case my analysis is correct - the
> > > solution didn't seem obvious to me as a bind-mount has no concept of
> > > what it's "parent" is (Which in this case should be the devpts mount at
> > > /dev/pts.).
> >
> > We might be able to improve the quality of the implementation, by
> > noticing this case early (sb->s_root != mnt->mnt_root) and using the
> > same tricks on /dev/pts/ptmx as we do on /dev/ptmx. That is looking
> > in ../pts and see if the filesystem we want is there.
> >
> > It would be a wee bit tricky but doable. The practical question becomes
> > what breaks and what makes it worth maintaining such a mechanism.
> >
> > I don't remember how important it is to have a valid path in proc. So
> > I won't comment on how important it is to improve the quality of
> > the implementation.
>
> It's quite important for containers. The problem is that we can't (yet)
> mknod() in a user namespace and making /dev/ptmx a symlink to
> /dev/pts/ptmx will cause issues when used together with path-based LSMs
> like AppArmor so a bind-mount is the only reliable option.
>
> >
> > The code can be improved by doing something like:
>
> Right, what do you think about Linus suggestion? I'm happy to look into
> it.
Ah you're pointing at a similar solution. Sorry, I missed it on the
first pass. I'll send a patch soon.
Christian
>
> Christian
>
> >
> > static int devpts_ptmx_pts_path(struct path *path)
> > {
> > struct super_block *sb;
> > int err;
> >
> > /* Is a devpts filesystem at "pts" in the same directory? */
> > err = path_pts(path);
> > if (err)
> > return err;
> >
> > /* Is the path the root of a devpts filesystem? */
> > sb = path->mnt->mnt_sb;
> > if ((sb->s_magic != DEVPTS_SUPER_MAGIC) ||
> > (path->mnt->mnt_root != sb->s_root))
> > return -ENODEV;
> >
> > return 0;
> > }
> >
> > ....
> > if ((DEVPTS_SB(path.mnt->mnt_sb) == fsi) &&
> > (path.mnt->mnt_root == fsi->ptmx_dentry)) {
> > /* While the start point is a bind mount of single file
> > * walk upwards.
> > */
> > while ((path.mnt->mnt_root == path.dentry) && follow_up(&path))
> > ;
> > if (devpts_ptmx_pts_path(&path) == 0) {
> > dput(path.dentry);
> > return path.mnt;
> > }
> > /* No luck fall through to the old code */
> > path_put(path);
> > path = filp->f_path;
> > path_get(&path);
> > }
> >
> > The fall through vs fail would be a judgement on how important it is to
> > have a useable path in proc for TIOCPTPEER.
> >
> > Eric
Powered by blists - more mailing lists