linux-kernel - Re: [PATCH V2 5/7] thermal/drivers/cpu_cooling: Add idle cooling device documentation

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180308115441.edb4jtpodj2qut2n@oak.lan>
Date:   Thu, 8 Mar 2018 11:54:41 +0000
From:   Daniel Thompson <daniel.thompson@...aro.org>
To:     Pavel Machek <pavel@....cz>
Cc:     Daniel Lezcano <daniel.lezcano@...aro.org>, edubezval@...il.com,
        kevin.wangtao@...aro.org, leo.yan@...aro.org,
        vincent.guittot@...aro.org, amit.kachhap@...il.com,
        linux-kernel@...r.kernel.org, javi.merino@...nel.org,
        rui.zhang@...el.com, linux-pm@...r.kernel.org,
        Jonathan Corbet <corbet@....net>,
        "open list:DOCUMENTATION" <linux-doc@...r.kernel.org>
Subject: Re: [PATCH V2 5/7] thermal/drivers/cpu_cooling: Add idle cooling
 device documentation

On Thu, Mar 08, 2018 at 09:59:49AM +0100, Pavel Machek wrote:
> Hi!
> 
> > >> +Under certain circumstances, the SoC reaches a temperature exceeding
> > >> +the allocated power budget or the maximum temperature limit. The
> > > 
> > > I don't understand. Power budget is in W, temperature is in
> > > kelvin. Temperature can't exceed power budget AFAICT.
> > 
> > Yes, it is badly worded. Is the following better ?
> > 
> > "
> > Under certain circumstances a SoC can reach the maximum temperature
> > limit or is unable to stabilize the temperature around a temperature
> > control.
> > 
> > When the SoC has to stabilize the temperature, the kernel can act on a
> > cooling device to mitigate the dissipated power.
> > 
> > When the maximum temperature is reached and to prevent a catastrophic
> > situation a radical decision must be taken to reduce the temperature
> > under the critical threshold, that impacts the performance.
> > 
> > "
> 
> Actually... if hardware is expected to protect itself, I'd tone it
> down. No need to be all catastrophic and critical... But yes, better.

Makes sense. For a thermally overcommitted but passively cooled device 
work close to max operating temperature it is not a critical situation 
requiring a radical reaction, it is normal operation.

Put another way, it would severely bogus to attach KERN_CRITICAL 
messages to reaching the cooling threshold.


Daniel.


> > > Critical here, critical there. I have trouble following
> > > it. Theoretically hardware should protect itself, because you don't
> > > want kernel bug to damage your CPU?
> > 
> > There are several levels of protection. The first level is mitigating
> > the temperature from the kernel, then in the temperature sensor a reset
> > line will trigger the reboot of the CPUs. Usually it is a register where
> > you write the maximum temperature, from the driver itself. I never tried
> > to write 1000°C in this register and see if I can burn the board.
> > 
> > I know some boards have another level of thermal protection in the
> > hardware itself and some other don't.
> > 
> > In any case, from a kernel point of view, it is a critical situation as
> > we are about to hard reboot the system and in this case it is preferable
> > to drop drastically the performance but give the opportunity to the
> > system to run in a degraded mode.
> 
> Agreed you want to keep going. In ACPI world, we shutdown when
> critical trip point is reached, so this is somehow confusing.
> 
> > >> +Solutions:
> > >> +----------
> > >> +
> > >> +If we can remove the static and the dynamic leakage for a specific
> > >> +duration in a controlled period, the SoC temperature will
> > >> +decrease. Acting at the idle state duration or the idle cycle
> > > 
> > > "should" decrease? If you are in bad environment..
> > 
> > No, it will decrease in any case because of the static leakage drop. The
> > bad environment will impact the speed of this decrease.
> 
> I meant... if ambient temperature is 105C, there's not much you can do
> to cool system down :-).
> 
> > >> +Idle Injection:
> > >> +---------------
> > >> +
> > >> +The base concept of the idle injection is to force the CPU to go to an
> > >> +idle state for a specified time each control cycle, it provides
> > >> +another way to control CPU power and heat in addition to
> > >> +cpufreq. Ideally, if all CPUs of a cluster inject idle synchronously,
> > >> +this cluster can get into the deepest idle state and achieve minimum
> > >> +power consumption, but that will also increase system response latency
> > >> +if we inject less than cpuidle latency.
> > > 
> > > I don't understand last sentence.
> > 
> > Is it better ?
> > 
> > "Ideally, if all CPUs, belonging to the same cluster, inject their idle
> > cycle synchronously, the cluster can reach its power down state with a
> > minimum power consumption and static leakage drop. However, these idle
> > cycles injection will add extra latencies as the CPUs will have to
> > wakeup from a deep sleep state."
> 
> Extra comma "CPUs , belonging". But yes, better.
> 
> > Thanks!
> 
> You are welcome. Best regards,
> 									Pavel
> -- 
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html