| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180309222327.18689-11-enric.balletbo@collabora.com>
Date: Fri, 9 Mar 2018 23:23:01 +0100
From: Enric Balletbo i Serra <enric.balletbo@...labora.com>
To: architt@...eaurora.org, inki.dae@...sung.com,
thierry.reding@...il.com, hjc@...k-chips.com,
seanpaul@...omium.org, airlied@...ux.ie, tfiga@...omium.org,
heiko@...ech.de
Cc: dri-devel@...ts.freedesktop.org, dianders@...omium.org,
a.hajda@...sung.com, ykk@...k-chips.com, kernel@...labora.com,
m.szyprowski@...sung.com, linux-samsung-soc@...r.kernel.org,
jy0922.shim@...sung.com, rydberg@...math.org, krzk@...nel.org,
linux-rockchip@...ts.infradead.org, kgene@...nel.org,
linux-input@...r.kernel.org, orjan.eide@....com,
wxt@...k-chips.com, jeffy.chen@...k-chips.com,
linux-arm-kernel@...ts.infradead.org, mark.yao@...k-chips.com,
wzz@...k-chips.com, hl@...k-chips.com, jingoohan1@...il.com,
sw0312.kim@...sung.com, linux-kernel@...r.kernel.org,
kyungmin.park@...sung.com, Laurent.pinchart@...asonboard.com,
kuankuan.y@...il.com, hshi@...omium.org,
Stéphane Marchesin <marcheu@...omium.org>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>
Subject: [PATCH v5 10/36] drm/bridge: analogix_dp: Retry bridge enable when it failed
From: zain wang <wzz@...k-chips.com>
When we enable bridge failed, we have to retry it, otherwise we would get
the abnormal display.
Cc: Stéphane Marchesin <marcheu@...omium.org>
Signed-off-by: zain wang <wzz@...k-chips.com>
Signed-off-by: Sean Paul <seanpaul@...omium.org>
Signed-off-by: Thierry Escande <thierry.escande@...labora.com>
Reviewed-by: Andrzej Hajda <a.hajda@...sung.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
Tested-by: Marek Szyprowski <m.szyprowski@...sung.com>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 65 +++++++++++++++++-----
drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 3 +-
drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 5 +-
3 files changed, 56 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index ea7a80a989c6..c81733b8185e 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -43,8 +43,10 @@ struct bridge_init {
struct device_node *node;
};
-static void analogix_dp_init_dp(struct analogix_dp_device *dp)
+static int analogix_dp_init_dp(struct analogix_dp_device *dp)
{
+ int ret;
+
analogix_dp_reset(dp);
analogix_dp_swreset(dp);
@@ -56,10 +58,13 @@ static void analogix_dp_init_dp(struct analogix_dp_device *dp)
analogix_dp_enable_sw_function(dp);
analogix_dp_config_interrupt(dp);
- analogix_dp_init_analog_func(dp);
+ ret = analogix_dp_init_analog_func(dp);
+ if (ret)
+ return ret;
analogix_dp_init_hpd(dp);
analogix_dp_init_aux(dp);
+ return 0;
}
static int analogix_dp_detect_hpd(struct analogix_dp_device *dp)
@@ -918,7 +923,7 @@ static irqreturn_t analogix_dp_irq_thread(int irq, void *arg)
return IRQ_HANDLED;
}
-static void analogix_dp_commit(struct analogix_dp_device *dp)
+static int analogix_dp_commit(struct analogix_dp_device *dp)
{
int ret;
@@ -928,11 +933,10 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
DRM_ERROR("failed to disable the panel\n");
}
- ret = readx_poll_timeout(analogix_dp_train_link, dp, ret, !ret, 100,
- DP_TIMEOUT_TRAINING_US * 5);
+ ret = analogix_dp_train_link(dp);
if (ret) {
dev_err(dp->dev, "unable to do link train, ret=%d\n", ret);
- return;
+ return ret;
}
analogix_dp_enable_scramble(dp, 1);
@@ -953,6 +957,7 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
dp->psr_enable = analogix_dp_detect_sink_psr(dp);
if (dp->psr_enable)
analogix_dp_enable_sink_psr(dp);
+ return 0;
}
/*
@@ -1149,12 +1154,9 @@ static void analogix_dp_bridge_pre_enable(struct drm_bridge *bridge)
DRM_ERROR("failed to setup the panel ret = %d\n", ret);
}
-static void analogix_dp_bridge_enable(struct drm_bridge *bridge)
+static int analogix_dp_set_bridge(struct analogix_dp_device *dp)
{
- struct analogix_dp_device *dp = bridge->driver_private;
-
- if (dp->dpms_mode == DRM_MODE_DPMS_ON)
- return;
+ int ret;
pm_runtime_get_sync(dp->dev);
@@ -1162,11 +1164,46 @@ static void analogix_dp_bridge_enable(struct drm_bridge *bridge)
dp->plat_data->power_on(dp->plat_data);
phy_power_on(dp->phy);
- analogix_dp_init_dp(dp);
+
+ ret = analogix_dp_init_dp(dp);
+ if (ret)
+ goto out_dp_init;
+
+ ret = analogix_dp_commit(dp);
+ if (ret)
+ goto out_dp_init;
+
enable_irq(dp->irq);
- analogix_dp_commit(dp);
+ return 0;
- dp->dpms_mode = DRM_MODE_DPMS_ON;
+out_dp_init:
+ phy_power_off(dp->phy);
+ if (dp->plat_data->power_off)
+ dp->plat_data->power_off(dp->plat_data);
+ pm_runtime_put_sync(dp->dev);
+
+ return ret;
+}
+
+static void analogix_dp_bridge_enable(struct drm_bridge *bridge)
+{
+ struct analogix_dp_device *dp = bridge->driver_private;
+ int timeout_loop = 0;
+
+ if (dp->dpms_mode == DRM_MODE_DPMS_ON)
+ return;
+
+ while (timeout_loop < MAX_PLL_LOCK_LOOP) {
+ if (analogix_dp_set_bridge(dp) == 0) {
+ dp->dpms_mode = DRM_MODE_DPMS_ON;
+ return;
+ }
+ dev_err(dp->dev, "failed to set bridge, retry: %d\n",
+ timeout_loop);
+ timeout_loop++;
+ usleep_range(10, 11);
+ }
+ dev_err(dp->dev, "too many times retry set bridge, give it up\n");
}
static void analogix_dp_bridge_disable(struct drm_bridge *bridge)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 403ff853464b..769255dc6e99 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -19,6 +19,7 @@
#define DP_TIMEOUT_LOOP_COUNT 100
#define MAX_CR_LOOP 5
#define MAX_EQ_LOOP 5
+#define MAX_PLL_LOCK_LOOP 5
/* Training takes 22ms if AUX channel comm fails. Use this as retry interval */
#define DP_TIMEOUT_TRAINING_US 22000
@@ -197,7 +198,7 @@ void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable);
void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
enum analog_power_block block,
bool enable);
-void analogix_dp_init_analog_func(struct analogix_dp_device *dp);
+int analogix_dp_init_analog_func(struct analogix_dp_device *dp);
void analogix_dp_init_hpd(struct analogix_dp_device *dp);
void analogix_dp_force_hpd(struct analogix_dp_device *dp);
enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index e78c861b9e06..b47c5af43560 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -333,7 +333,7 @@ void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,
}
}
-void analogix_dp_init_analog_func(struct analogix_dp_device *dp)
+int analogix_dp_init_analog_func(struct analogix_dp_device *dp)
{
u32 reg;
int timeout_loop = 0;
@@ -355,7 +355,7 @@ void analogix_dp_init_analog_func(struct analogix_dp_device *dp)
timeout_loop++;
if (DP_TIMEOUT_LOOP_COUNT < timeout_loop) {
dev_err(dp->dev, "failed to get pll lock status\n");
- return;
+ return -ETIMEDOUT;
}
usleep_range(10, 20);
}
@@ -366,6 +366,7 @@ void analogix_dp_init_analog_func(struct analogix_dp_device *dp)
reg &= ~(SERDES_FIFO_FUNC_EN_N | LS_CLK_DOMAIN_FUNC_EN_N
| AUX_FUNC_EN_N);
writel(reg, dp->reg_base + ANALOGIX_DP_FUNC_EN_2);
+ return 0;
}
void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp)
--
2.16.1
Powered by blists - more mailing lists