[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1520603500-15218-4-git-send-email-jacopo+renesas@jmondi.org>
Date: Fri, 9 Mar 2018 14:51:40 +0100
From: Jacopo Mondi <jacopo+renesas@...ndi.org>
To: architt@...eaurora.org, a.hajda@...sung.com,
Laurent.pinchart@...asonboard.com, airlied@...ux.ie,
horms@...ge.net.au, magnus.damm@...il.com, geert@...ux-m68k.org,
niklas.soderlund@...natech.se, sergei.shtylyov@...entembedded.com,
robh+dt@...nel.org, mark.rutland@....com
Cc: Jacopo Mondi <jacopo+renesas@...ndi.org>,
dri-devel@...ts.freedesktop.org, linux-renesas-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 3/3] arm64: dts: renesas: Add LVDS decoder to R-Car V3M Eagle
The R-Car V3M Eagle board includes a transparent LVDS decoder, connected
to the on-chip LVDS encoder output on one side and to HDMI encoder
ADV7511w on the other one.
As the decoder does not need any configuration it has been so-far
omitted from DTS. Now that a driver for transparent LVDS decoder is
available, describe it in DT as well.
Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
---
arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 31 ++++++++++++++++++++++++--
1 file changed, 29 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index c0fd144..0a95c20 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -42,6 +42,33 @@
};
};
};
+
+ lvds,decoder {
+ compatible = "lvds-decoder";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds_dec_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+
+ port@1{
+ reg = <1>;
+
+ lvds_dec_out: endpoint {
+ remote-endpoint = <&adv7511_in>;
+ };
+
+ };
+
+ };
+ };
};
&avb {
@@ -98,7 +125,7 @@
port@0 {
reg = <0>;
adv7511_in: endpoint {
- remote-endpoint = <&lvds0_out>;
+ remote-endpoint = <&lvds_dec_out>;
};
};
@@ -153,7 +180,7 @@
ports {
port@1 {
endpoint {
- remote-endpoint = <&adv7511_in>;
+ remote-endpoint = <&lvds_dec_in>;
};
};
};
--
2.7.4
Powered by blists - more mailing lists