| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180309160825.fde2am6jo6qs6vp6@earth.universe>
Date: Fri, 9 Mar 2018 17:08:25 +0100
From: Sebastian Reichel <sre@...nel.org>
To: Quentin Schulz <quentin.schulz@...tlin.com>
Cc: robh+dt@...nel.org, mark.rutland@....com, wens@...e.org,
maxime.ripard@...tlin.com, lee.jones@...aro.org,
linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, thomas.petazzoni@...tlin.com,
linux-sunxi@...glegroups.com
Subject: Re: [PATCH v5 3/6] power: supply: axp20x_battery: use data struct
for variant specific code
Hi Quentin,
On Wed, Feb 28, 2018 at 11:35:58AM +0100, Quentin Schulz wrote:
> We used to use IDs to select a function or a feature depending on the
> variant. It's easier to maintain the code by adding data structure
> storing the few differences between variants so that we don't add a pile
> of if conditions.
>
> Let's use this data structure and update the code to use it.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@...tlin.com>
> Reviewed-by: Chen-Yu Tsai <wens@...e.org>
> ---
I applied this, but modified the patch slightly, so that
it actually calls your new set_max_voltage() callback in
axp20x_battery_set_prop(). Please check that the resulting
patch looks correct to you:
https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply.git/commit/?h=for-next&id=648badd797c762a713b48afc3b67d56abdd0073b
-- Sebastian
> drivers/power/supply/axp20x_battery.c | 100 +++++++++++++++++----------
> 1 file changed, 66 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
> index 7494f0f..04a0d91 100644
> --- a/drivers/power/supply/axp20x_battery.c
> +++ b/drivers/power/supply/axp20x_battery.c
> @@ -53,6 +53,16 @@
>
> #define AXP20X_V_OFF_MASK GENMASK(2, 0)
>
> +struct axp20x_batt_ps;
> +
> +struct axp_data {
> + int ccc_scale;
> + int ccc_offset;
> + bool has_fg_valid;
> + int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val);
> + int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val);
> +};
> +
> struct axp20x_batt_ps {
> struct regmap *regmap;
> struct power_supply *batt;
> @@ -62,7 +72,7 @@ struct axp20x_batt_ps {
> struct iio_channel *batt_v;
> /* Maximum constant charge current */
> unsigned int max_ccc;
> - u8 axp_id;
> + const struct axp_data *data;
> };
>
> static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
> @@ -123,22 +133,6 @@ static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
> return 0;
> }
>
> -static void raw_to_constant_charge_current(struct axp20x_batt_ps *axp, int *val)
> -{
> - if (axp->axp_id == AXP209_ID)
> - *val = *val * 100000 + 300000;
> - else
> - *val = *val * 150000 + 300000;
> -}
> -
> -static void constant_charge_current_to_raw(struct axp20x_batt_ps *axp, int *val)
> -{
> - if (axp->axp_id == AXP209_ID)
> - *val = (*val - 300000) / 100000;
> - else
> - *val = (*val - 300000) / 150000;
> -}
> -
> static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
> int *val)
> {
> @@ -150,7 +144,7 @@ static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
>
> *val &= AXP20X_CHRG_CTRL1_TGT_CURR;
>
> - raw_to_constant_charge_current(axp, val);
> + *val = *val * axp->data->ccc_scale + axp->data->ccc_offset;
>
> return 0;
> }
> @@ -269,8 +263,7 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
> if (ret)
> return ret;
>
> - if (axp20x_batt->axp_id == AXP221_ID &&
> - !(reg & AXP22X_FG_VALID))
> + if (axp20x_batt->data->has_fg_valid && !(reg & AXP22X_FG_VALID))
> return -EINVAL;
>
> /*
> @@ -281,11 +274,8 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
> break;
>
> case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> - if (axp20x_batt->axp_id == AXP209_ID)
> - return axp20x_battery_get_max_voltage(axp20x_batt,
> - &val->intval);
> - return axp22x_battery_get_max_voltage(axp20x_batt,
> - &val->intval);
> + return axp20x_batt->data->get_max_voltage(axp20x_batt,
> + &val->intval);
>
> case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, ®);
> @@ -312,6 +302,32 @@ static int axp20x_battery_get_prop(struct power_supply *psy,
> return 0;
> }
>
> +static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
> + int val)
> +{
> + switch (val) {
> + case 4100000:
> + val = AXP20X_CHRG_CTRL1_TGT_4_1V;
> + break;
> +
> + case 4200000:
> + val = AXP20X_CHRG_CTRL1_TGT_4_2V;
> + break;
> +
> + default:
> + /*
> + * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
> + * can be set to 4.22V and 4.24V, but these voltages are too
> + * high for Lithium based batteries (AXP PMICs are supposed to
> + * be used with these kinds of battery).
> + */
> + return -EINVAL;
> + }
> +
> + return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
> + AXP20X_CHRG_CTRL1_TGT_VOLT, val);
> +}
> +
> static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
> int val)
> {
> @@ -321,9 +337,6 @@ static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
> break;
>
> case 4150000:
> - if (axp20x_batt->axp_id == AXP221_ID)
> - return -EINVAL;
> -
> val = AXP20X_CHRG_CTRL1_TGT_4_15V;
> break;
>
> @@ -351,7 +364,8 @@ static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt,
> if (charge_current > axp_batt->max_ccc)
> return -EINVAL;
>
> - constant_charge_current_to_raw(axp_batt, &charge_current);
> + charge_current = (charge_current - axp_batt->data->ccc_offset) /
> + axp_batt->data->ccc_scale;
>
> if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
> return -EINVAL;
> @@ -365,12 +379,14 @@ static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp,
> {
> bool lower_max = false;
>
> - constant_charge_current_to_raw(axp, &charge_current);
> + charge_current = (charge_current - axp->data->ccc_offset) /
> + axp->data->ccc_scale;
>
> if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
> return -EINVAL;
>
> - raw_to_constant_charge_current(axp, &charge_current);
> + charge_current = charge_current * axp->data->ccc_scale +
> + axp->data->ccc_offset;
>
> if (charge_current > axp->max_ccc)
> dev_warn(axp->dev,
> @@ -460,13 +476,28 @@ static const struct power_supply_desc axp20x_batt_ps_desc = {
> .set_property = axp20x_battery_set_prop,
> };
>
> +static const struct axp_data axp209_data = {
> + .ccc_scale = 100000,
> + .ccc_offset = 300000,
> + .get_max_voltage = axp20x_battery_get_max_voltage,
> + .set_max_voltage = axp20x_battery_set_max_voltage,
> +};
> +
> +static const struct axp_data axp221_data = {
> + .ccc_scale = 150000,
> + .ccc_offset = 300000,
> + .has_fg_valid = true,
> + .get_max_voltage = axp22x_battery_get_max_voltage,
> + .set_max_voltage = axp22x_battery_set_max_voltage,
> +};
> +
> static const struct of_device_id axp20x_battery_ps_id[] = {
> {
> .compatible = "x-powers,axp209-battery-power-supply",
> - .data = (void *)AXP209_ID,
> + .data = (void *)&axp209_data,
> }, {
> .compatible = "x-powers,axp221-battery-power-supply",
> - .data = (void *)AXP221_ID,
> + .data = (void *)&axp221_data,
> }, { /* sentinel */ },
> };
> MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
> @@ -476,6 +507,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
> struct axp20x_batt_ps *axp20x_batt;
> struct power_supply_config psy_cfg = {};
> struct power_supply_battery_info info;
> + struct device *dev = &pdev->dev;
>
> if (!of_device_is_available(pdev->dev.of_node))
> return -ENODEV;
> @@ -516,7 +548,7 @@ static int axp20x_power_probe(struct platform_device *pdev)
> psy_cfg.drv_data = axp20x_batt;
> psy_cfg.of_node = pdev->dev.of_node;
>
> - axp20x_batt->axp_id = (uintptr_t)of_device_get_match_data(&pdev->dev);
> + axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev);
>
> axp20x_batt->batt = devm_power_supply_register(&pdev->dev,
> &axp20x_batt_ps_desc,
> --
> git-series 0.9.1
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists