| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c698987c-5fec-da8a-c2a0-80bf11b579a8@samsung.com>
Date: Mon, 12 Mar 2018 09:26:33 +0100
From: Andrzej Hajda <a.hajda@...sung.com>
To: Jacopo Mondi <jacopo+renesas@...ndi.org>, architt@...eaurora.org,
Laurent.pinchart@...asonboard.com, airlied@...ux.ie,
horms@...ge.net.au, magnus.damm@...il.com, geert@...ux-m68k.org,
niklas.soderlund@...natech.se, sergei.shtylyov@...entembedded.com,
robh+dt@...nel.org, mark.rutland@....com
Cc: dri-devel@...ts.freedesktop.org, linux-renesas-soc@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/3] drm: bridge: Add LVDS decoder driver
On 09.03.2018 14:51, Jacopo Mondi wrote:
> Add transparent LVDS decoder driver.
>
> A transparent LVDS decoder is a DRM bridge device that does not require
> any configuration and converts LVDS input to digital CMOS/TTL parallel
> data output.
Neither code, neither bindings are LVDS specific, this is driver for any
bridge w/o configuration.
I am not sure how many bridges does not need configuration, usually
they need to be powered at least.
I guess in many cases power line is always on, but this is board
specific not device specific.
Looking at previous version of the patchset it looks little bit as a
hack, and certainly it will be a hack in case of R-Car Gen3 V3M Eagle,
which I guess you want to use it.
> Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
> ---
> drivers/gpu/drm/bridge/Kconfig | 8 +++
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/lvds-decoder.c | 129 ++++++++++++++++++++++++++++++++++
> 3 files changed, 138 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/lvds-decoder.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 3b99d5a..e52a5af 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -32,6 +32,14 @@ config DRM_DUMB_VGA_DAC
> help
> Support for RGB to VGA DAC based bridges
>
> +config DRM_LVDS_DECODER
> + tristate "Transparent LVDS to parallel decoder support"
> + depends on OF
> + select DRM_PANEL_BRIDGE
> + help
> + Support for transparent LVDS to parallel decoders that don't require
> + any configuration.
> +
> config DRM_LVDS_ENCODER
> tristate "Transparent parallel to LVDS encoder support"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 373eb28..edc2332 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> obj-$(CONFIG_DRM_ANALOGIX_ANX78XX) += analogix-anx78xx.o
> obj-$(CONFIG_DRM_DUMB_VGA_DAC) += dumb-vga-dac.o
> +obj-$(CONFIG_DRM_LVDS_DECODER) += lvds-decoder.o
> obj-$(CONFIG_DRM_LVDS_ENCODER) += lvds-encoder.o
> obj-$(CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW) += megachips-stdpxxxx-ge-b850v3-fw.o
> obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> diff --git a/drivers/gpu/drm/bridge/lvds-decoder.c b/drivers/gpu/drm/bridge/lvds-decoder.c
> new file mode 100644
> index 0000000..319f4d5
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/lvds-decoder.c
> @@ -0,0 +1,129 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * LVDS to parallel data DRM bridge driver.
> + *
> + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@...ndi.org>
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_panel.h>
> +
> +#include <linux/of_graph.h>
> +
> +struct lvds_decoder {
> + struct device *dev;
> +
> + struct drm_bridge bridge;
> + struct drm_bridge *next;
> + struct drm_encoder *bridge_encoder;
Unused field.
Regards
Andrzej
> +};
> +
> +static inline struct lvds_decoder *to_lvds_decoder(struct drm_bridge *bridge)
> +{
> + return container_of(bridge, struct lvds_decoder, bridge);
> +}
> +
> +static int lvds_decoder_attach(struct drm_bridge *bridge)
> +{
> + struct lvds_decoder *lvds = to_lvds_decoder(bridge);
> +
> + return drm_bridge_attach(bridge->encoder, lvds->next, bridge);
> +}
> +
> +struct drm_bridge_funcs lvds_dec_bridge_func = {
> + .attach = lvds_decoder_attach,
> +};
> +
> +static int lvds_decoder_parse_dt(struct lvds_decoder *lvds)
> +{
> + struct device_node *lvds_output;
> + struct device_node *remote;
> + int ret = 0;
> +
> + lvds_output = of_graph_get_endpoint_by_regs(lvds->dev->of_node, 1, -1);
> + if (!lvds_output) {
> + dev_err(lvds->dev, "Missing endpoint in Port@1\n");
> + return -ENODEV;
> + }
> +
> + remote = of_graph_get_remote_port_parent(lvds_output);
> + if (!remote) {
> + dev_err(lvds->dev, "Endpoint in Port@1 unconnected\n");
> + ret = -ENODEV;
> + goto error_put_lvds_node;
> + }
> +
> + if (!of_device_is_available(remote)) {
> + dev_err(lvds->dev, "Port@1 remote endpoint is disabled\n");
> + ret = -ENODEV;
> + goto error_put_remote_node;
> + }
> +
> + lvds->next = of_drm_find_bridge(remote);
> + if (!lvds->next)
> + ret = -EPROBE_DEFER;
> +
> +error_put_remote_node:
> + of_node_put(remote);
> +error_put_lvds_node:
> + of_node_put(lvds_output);
> +
> + return ret;
> +}
> +
> +static int lvds_decoder_probe(struct platform_device *pdev)
> +{
> + struct lvds_decoder *lvds;
> + int ret;
> +
> + lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
> + if (!lvds)
> + return -ENOMEM;
> +
> + lvds->dev = &pdev->dev;
> + platform_set_drvdata(pdev, lvds);
> +
> + ret = lvds_decoder_parse_dt(lvds);
> + if (ret)
> + return ret;
> +
> + lvds->bridge.driver_private = lvds;
> + lvds->bridge.of_node = pdev->dev.of_node;
> + lvds->bridge.funcs = &lvds_dec_bridge_func;
> +
> + drm_bridge_add(&lvds->bridge);
> +
> + return 0;
> +}
> +
> +static int lvds_decoder_remove(struct platform_device *pdev)
> +{
> + struct lvds_decoder *lvds = platform_get_drvdata(pdev);
> +
> + drm_bridge_remove(&lvds->bridge);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id lvds_decoder_match[] = {
> + { .compatible = "lvds-decoder", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, lvds_decoder_match);
> +#endif
> +
> +static struct platform_driver lvds_decoder_driver = {
> + .probe = lvds_decoder_probe,
> + .remove = lvds_decoder_remove,
> + .driver = {
> + .name = "lvds_decoder",
> + .of_match_table = lvds_decoder_match,
> + },
> +};
> +module_platform_driver(lvds_decoder_driver);
> +
> +MODULE_AUTHOR("Jacopo Mondi <jacopo@...ndi.org>");
> +MODULE_DESCRIPTION("Transparent LVDS to parallel data decoder");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>
>
>
>
Powered by blists - more mailing lists