[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180312161050.7647-1-harald@ccbib.org>
Date: Mon, 12 Mar 2018 16:10:45 +0000
From: Harald Geyer <harald@...ib.org>
To: Maxime Ripard <maxime.ripard@...tlin.com>,
Chen-Yu Tsai <wens@...e.org>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Andre Przywara <andre.przywara@....com>,
Icenowy Zheng <icenowy@...c.io>, info@...mex.com,
Harald Geyer <harald@...ib.org>
Subject: arm64: allwinner: Add support for TERES I laptop
This series adds support for the TERES I open hardware laptop produced
by olimex. With these patches and a bootloader capable of setting up
simple framebuffer the laptop is quite useable.
Patches 1-4 add some pin descriptions and devices in the A64 dtsi, which
are useful to have on the teres.
Patch 5 finally adds the board dts itself.
best regards,
Harald
Harald Geyer (5):
arm64: dts: allwinner: a64: Add i2c0 pins
arm64: dts: allwinner: a64: Add watchdog
arm64: dts: allwinner: a64: add simplefb for A64 SoC
arm64: dts: allwinner: a64: Add pwm device
arm64: allwinner: a64: Add support for TERES I laptop
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../boot/dts/allwinner/sun50i-a64-teres-i.dts | 308 +++++++++++++++++++++
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 44 +++
3 files changed, 353 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts
--
2.11.0
Powered by blists - more mailing lists