[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1520949014-21468-14-git-send-email-yannick.fertre@st.com>
Date: Tue, 13 Mar 2018 14:50:12 +0100
From: yannick fertre <yannick.fertre@...com>
To: Vikas Manocha <vikas.manocha@...com>,
Tom Rini <trini@...sulko.com>,
Benjamin Gaignard <benjamin.gaignard@...aro.org>,
Yannick Fertre <yannick.fertre@...com>,
Philippe Cornu <philippe.cornu@...com>,
"Patrice Chotard" <patrice.chotard@...com>,
Patrick DELAUNAY <patrick.delaunay@...com>,
Christophe KERELLO <christophe.kerello@...com>,
Archit Taneja <architt@...eaurora.org>,
Andrzej Hajda <a.hajda@...sung.com>,
"Laurent Pinchart" <Laurent.pinchart@...asonboard.com>,
David Airlie <airlied@...ux.ie>,
Brian Norris <briannorris@...omium.org>,
Bhumika Goyal <bhumirks@...il.com>,
Gustavo Padovan <gustavo@...ovan.org>,
"Maarten Lankhorst" <maarten.lankhorst@...ux.intel.com>,
Sean Paul <seanpaul@...omium.org>,
Albert Aribaud <albert.u.boot@...baud.net>,
"Simon Glass" <sjg@...omium.org>,
Anatolij Gustschin <agust@...x.de>,
Thierry Reding <thierry.reding@...il.com>
CC: <u-boot@...ts.denx.de>, <dri-devel@...ts.freedesktop.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH v3 09/10] arm: dts: stm32: add display for STM32F769 disco board
Enable the display controller, mipi dsi bridge & panel.
Set panel display timings.
Signed-off-by: yannick fertre <yannick.fertre@...com>
---
arch/arm/dts/stm32f769-disco.dts | 71 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
diff --git a/arch/arm/dts/stm32f769-disco.dts b/arch/arm/dts/stm32f769-disco.dts
index 59c9d31..82985b9 100644
--- a/arch/arm/dts/stm32f769-disco.dts
+++ b/arch/arm/dts/stm32f769-disco.dts
@@ -42,6 +42,7 @@
/dts-v1/;
#include "stm32f746.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/memory/stm32-sdram.h>
/ {
@@ -264,3 +265,73 @@
bus-width = <4>;
max-frequency = <25000000>;
};
+
+<dc {
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_out_dsi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dsi_in>;
+ };
+ };
+};
+
+&dsi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi_in: endpoint {
+ remote-endpoint = <<dc_out_dsi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi_out: endpoint {
+ remote-endpoint = <&dsi_panel_in>;
+ };
+ };
+ };
+
+ panel-dsi@0 {
+ compatible = "orisetech,otm8009a";
+ reg = <0>; /* dsi virtual channel (0..3) */
+ reset-gpios = <&gpioj 15 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ port {
+ dsi_panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ display-timings {
+ timing@0 {
+ clock-frequency = <32729000>;
+ hactive = <480>;
+ hfront-porch = <120>;
+ hback-porch = <63>;
+ hsync-len = <120>;
+ vactive = <800>;
+ vfront-porch = <12>;
+ vback-porch = <12>;
+ vsync-len = <12>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <0>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+};
--
1.9.1
Powered by blists - more mailing lists