| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a36216b8-07b5-c334-095e-e873aa3becb2@codeaurora.org>
Date: Wed, 14 Mar 2018 16:18:40 +0530
From: Vivek Gautam <vivek.gautam@...eaurora.org>
To: Sibi S <sibis@...eaurora.org>, bjorn.andersson@...aro.org,
p.zabel@...gutronix.de, robh+dt@...nel.org
Cc: linux-remoteproc@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, georgi.djakov@...aro.org,
jassisinghbrar@...il.com, ohad@...ery.com, mark.rutland@....com,
kyan@...eaurora.org, sricharan@...eaurora.org,
akdwived@...eaurora.org, linux-arm-msm@...r.kernel.org,
tsoni@...eaurora.org
Subject: Re: [PATCH v3 2/7] reset: qcom: AOSS (always on subsystem) reset
controller
Hi Sibi,
On 3/14/2018 2:51 PM, Sibi S wrote:
> Add reset controller driver for Qualcomm SDM845 SoC to
> control reset signals provided by AOSS for Modem, Venus
> ADSP, GPU, Camera, Wireless, Display subsystem
>
> Signed-off-by: Sibi S <sibis@...eaurora.org>
> ---
> drivers/reset/Kconfig | 10 +++
> drivers/reset/Makefile | 1 +
> drivers/reset/reset-qcom-aoss.c | 156 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 167 insertions(+)
> create mode 100644 drivers/reset/reset-qcom-aoss.c
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 7fc7769..d06bd1d 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -81,6 +81,16 @@ config RESET_PISTACHIO
> help
> This enables the reset driver for ImgTec Pistachio SoCs.
>
> +config RESET_QCOM_AOSS
> + bool "Qcom AOSS Reset Driver"
> + depends on ARCH_QCOM || COMPILE_TEST
> + select MFD_SYSCON
I think we don't need this after we moved away from syscon?
> + help
> + This enables the AOSS (always on subsystem) reset driver
> + for Qualcomm SDM845 SoCs. Say Y if you want to control
> + reset signals provided by AOSS for Modem, Venus, ADSP,
> + GPU, Camera, Wireless, Display subsystem. Otherwise, say N.
> +
> config RESET_SIMPLE
> bool "Simple Reset Controller Driver" if COMPILE_TEST
> default ARCH_SOCFPGA || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 132c24f..c30044a 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -14,6 +14,7 @@ obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
> obj-$(CONFIG_RESET_MESON) += reset-meson.o
> obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
> obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
> +obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o
> obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
> obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
> obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
> diff --git a/drivers/reset/reset-qcom-aoss.c b/drivers/reset/reset-qcom-aoss.c
> new file mode 100644
> index 0000000..e70fb37
> --- /dev/null
> +++ b/drivers/reset/reset-qcom-aoss.c
> @@ -0,0 +1,156 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 The Linux Foundation. All rights reserved.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <linux/regmap.h>
> +#include <linux/of_device.h>
> +#include <dt-bindings/reset/qcom,sdm845-aoss.h>
> +
> +struct qcom_aoss_reset_map {
> + unsigned int reg;
> + u8 bit;
> +};
> +
> +struct qcom_aoss_desc {
> + const struct regmap_config *config;
> + const struct qcom_aoss_reset_map *resets;
> + int delay;
> + size_t num_resets;
> +};
> +
> +struct qcom_aoss_reset_data {
> + struct reset_controller_dev rcdev;
> + struct regmap *regmap;
> + const struct qcom_aoss_desc *desc;
> +};
> +
> +static const struct regmap_config sdm845_aoss_regmap_config = {
> + .name = "aoss-reset",
> + .reg_bits = 32,
> + .reg_stride = 4,
> + .val_bits = 32,
> + .max_register = 0x20000,
> + .fast_io = true,
> +};
> +
> +static const struct qcom_aoss_reset_map sdm845_aoss_resets[] = {
> + [AOSS_CC_MSS_RESTART] = { 0x0, 0 },
> + [AOSS_CC_CAMSS_RESTART] = { 0x1000, 0 },
> + [AOSS_CC_VENUS_RESTART] = { 0x2000, 0 },
> + [AOSS_CC_GPU_RESTART] = { 0x3000, 0 },
> + [AOSS_CC_DISPSS_RESTART] = { 0x4000, 0 },
> + [AOSS_CC_WCSS_RESTART] = { 0x10000, 0 },
> + [AOSS_CC_LPASS_RESTART] = { 0x20000, 0 },
> +};
> +
> +static const struct qcom_aoss_desc sdm845_aoss_desc = {
> + .config = &sdm845_aoss_regmap_config,
> + .resets = sdm845_aoss_resets,
> + /* Wait 6 32kHz sleep cycles for reset */
> + .delay = 200,
> + .num_resets = ARRAY_SIZE(sdm845_aoss_resets),
> +};
> +
> +static struct qcom_aoss_reset_data *to_qcom_aoss_reset_data(
> + struct reset_controller_dev *rcdev)
> +{
> + return container_of(rcdev, struct qcom_aoss_reset_data, rcdev);
> +}
Either a macro for such definition or 'inline'?
> +
> +static int qcom_aoss_control_assert(struct reset_controller_dev *rcdev,
> + unsigned long idx)
> +{
> + struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
> + const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
> +
> + return regmap_update_bits(data->regmap, map->reg,
> + BIT(map->bit), BIT(map->bit));
> +}
> +
> +static int qcom_aoss_control_deassert(struct reset_controller_dev *rcdev,
> + unsigned long idx)
> +{
> + struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
> + const struct qcom_aoss_reset_map *map = &data->desc->resets[idx];
> +
> + return regmap_update_bits(data->regmap, map->reg, BIT(map->bit), 0);
> +}
> +
> +static int qcom_aoss_control_reset(struct reset_controller_dev *rcdev,
> + unsigned long idx)
> +{
> + struct qcom_aoss_reset_data *data = to_qcom_aoss_reset_data(rcdev);
> + int ret;
> +
> + ret = qcom_aoss_control_assert(rcdev, idx);
> + if (ret)
> + return ret;
> +
> + udelay(data->desc->delay);
> +
> + return qcom_aoss_control_deassert(rcdev, idx);
> +}
> +
> +static const struct reset_control_ops qcom_aoss_reset_ops = {
> + .reset = qcom_aoss_control_reset,
> + .assert = qcom_aoss_control_assert,
> + .deassert = qcom_aoss_control_deassert,
> +};
> +
> +static int qcom_aoss_reset_probe(struct platform_device *pdev)
> +{
> + struct qcom_aoss_reset_data *data;
> + struct device *dev = &pdev->dev;
> + const struct qcom_aoss_desc *desc;
> + void __iomem *base;
> + struct resource *res;
> +
> + desc = of_device_get_match_data(dev);
> + if (!desc)
> + return -EINVAL;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->desc = desc;
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + data->regmap = devm_regmap_init_mmio(dev, base, desc->config);
> + if (IS_ERR(data->regmap)) {
> + dev_err(dev, "Unable to get aoss-reset regmap");
> + return PTR_ERR(data->regmap);
> + }
> +
> + data->rcdev.owner = THIS_MODULE;
> + data->rcdev.ops = &qcom_aoss_reset_ops;
> + data->rcdev.nr_resets = desc->num_resets;
> + data->rcdev.of_node = dev->of_node;
> +
> + return devm_reset_controller_register(dev, &data->rcdev);
> +}
> +
> +static const struct of_device_id qcom_aoss_reset_of_match[] = {
> + { .compatible = "qcom,sdm845-aoss-reset", .data = &sdm845_aoss_desc },
> + {}
> +};
> +
> +static struct platform_driver qcom_aoss_reset_driver = {
> + .probe = qcom_aoss_reset_probe,
> + .driver = {
> + .name = "qcom_aoss_reset",
> + .of_match_table = qcom_aoss_reset_of_match,
> + },
> +};
> +
> +builtin_platform_driver(qcom_aoss_reset_driver);
> +
> +MODULE_DESCRIPTION("Qualcomm AOSS Reset Driver");
> +MODULE_LICENSE("GPL v2");
Rest looks good to me. After taking above changes -
Reviewed-by: Vivek Gautam <vivek.gautam@...eaurora.org>
regards
Vivek
Powered by blists - more mailing lists