| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180314153603.3127932-42-arnd@arndb.de>
Date: Wed, 14 Mar 2018 16:35:54 +0100
From: Arnd Bergmann <arnd@...db.de>
To: linux-kernel@...r.kernel.org
Cc: Arnd Bergmann <arnd@...db.de>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jslaby@...e.com>, linux-serial@...r.kernel.org
Subject: [PATCH 41/47] serial: remove blackfin drivers
The blackfin architecture is getting removed, so both the bfin_uart
and bfin_sport_uart can be removed as well.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
drivers/tty/serial/Kconfig | 149 ----
drivers/tty/serial/Makefile | 2 -
drivers/tty/serial/bfin_sport_uart.c | 937 --------------------
drivers/tty/serial/bfin_sport_uart.h | 86 --
drivers/tty/serial/bfin_uart.c | 1551 ----------------------------------
5 files changed, 2725 deletions(-)
delete mode 100644 drivers/tty/serial/bfin_sport_uart.c
delete mode 100644 drivers/tty/serial/bfin_sport_uart.h
delete mode 100644 drivers/tty/serial/bfin_uart.c
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index f6e09326042d..031552eb3f65 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -498,92 +498,6 @@ config SERIAL_SA1100_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
-config SERIAL_BFIN
- tristate "Blackfin serial port support"
- depends on BLACKFIN
- select SERIAL_CORE
- select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
- help
- Add support for the built-in UARTs on the Blackfin.
-
- To compile this driver as a module, choose M here: the
- module is named bfin_uart.ko.
-
-config SERIAL_BFIN_CONSOLE
- bool "Console on Blackfin serial port"
- depends on SERIAL_BFIN=y
- select SERIAL_CORE_CONSOLE
-
-choice
- prompt "UART Mode"
- depends on SERIAL_BFIN
- default SERIAL_BFIN_DMA
- help
- This driver supports the built-in serial ports of the Blackfin family
- of CPUs
-
-config SERIAL_BFIN_DMA
- bool "DMA mode"
- depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n
- help
- This driver works under DMA mode. If this option is selected, the
- blackfin simple dma driver is also enabled.
-
-config SERIAL_BFIN_PIO
- bool "PIO mode"
- help
- This driver works under PIO mode.
-
-endchoice
-
-config SERIAL_BFIN_UART0
- bool "Enable UART0"
- depends on SERIAL_BFIN
- help
- Enable UART0
-
-config BFIN_UART0_CTSRTS
- bool "Enable UART0 hardware flow control"
- depends on SERIAL_BFIN_UART0
- help
- Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_UART1
- bool "Enable UART1"
- depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
- help
- Enable UART1
-
-config BFIN_UART1_CTSRTS
- bool "Enable UART1 hardware flow control"
- depends on SERIAL_BFIN_UART1
- help
- Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_UART2
- bool "Enable UART2"
- depends on SERIAL_BFIN && (BF54x || BF538 || BF539)
- help
- Enable UART2
-
-config BFIN_UART2_CTSRTS
- bool "Enable UART2 hardware flow control"
- depends on SERIAL_BFIN_UART2
- help
- Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_UART3
- bool "Enable UART3"
- depends on SERIAL_BFIN && (BF54x)
- help
- Enable UART3
-
-config BFIN_UART3_CTSRTS
- bool "Enable UART3 hardware flow control"
- depends on SERIAL_BFIN_UART3
- help
- Enable hardware flow control in the driver.
-
config SERIAL_IMX
tristate "IMX serial port support"
depends on HAS_DMA
@@ -1231,69 +1145,6 @@ config SERIAL_SC16IS7XX_SPI
This is additional support to exsisting driver.
You must select at least one bus for the driver to be built.
-config SERIAL_BFIN_SPORT
- tristate "Blackfin SPORT emulate UART"
- depends on BLACKFIN
- select SERIAL_CORE
- help
- Enable SPORT emulate UART on Blackfin series.
-
- To compile this driver as a module, choose M here: the
- module will be called bfin_sport_uart.
-
-config SERIAL_BFIN_SPORT_CONSOLE
- bool "Console on Blackfin sport emulated uart"
- depends on SERIAL_BFIN_SPORT=y
- select SERIAL_CORE_CONSOLE
-
-config SERIAL_BFIN_SPORT0_UART
- bool "Enable UART over SPORT0"
- depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
- help
- Enable UART over SPORT0
-
-config SERIAL_BFIN_SPORT0_UART_CTSRTS
- bool "Enable UART over SPORT0 hardware flow control"
- depends on SERIAL_BFIN_SPORT0_UART
- help
- Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_SPORT1_UART
- bool "Enable UART over SPORT1"
- depends on SERIAL_BFIN_SPORT
- help
- Enable UART over SPORT1
-
-config SERIAL_BFIN_SPORT1_UART_CTSRTS
- bool "Enable UART over SPORT1 hardware flow control"
- depends on SERIAL_BFIN_SPORT1_UART
- help
- Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_SPORT2_UART
- bool "Enable UART over SPORT2"
- depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
- help
- Enable UART over SPORT2
-
-config SERIAL_BFIN_SPORT2_UART_CTSRTS
- bool "Enable UART over SPORT2 hardware flow control"
- depends on SERIAL_BFIN_SPORT2_UART
- help
- Enable hardware flow control in the driver.
-
-config SERIAL_BFIN_SPORT3_UART
- bool "Enable UART over SPORT3"
- depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
- help
- Enable UART over SPORT3
-
-config SERIAL_BFIN_SPORT3_UART_CTSRTS
- bool "Enable UART over SPORT3 hardware flow control"
- depends on SERIAL_BFIN_SPORT3_UART
- help
- Enable hardware flow control in the driver.
-
config SERIAL_TIMBERDALE
tristate "Support for timberdale UART"
select SERIAL_CORE
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index c21835dc16b2..a9242484e821 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -29,8 +29,6 @@ obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
-obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o
-obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_MAX310X) += max310x.o
diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c
deleted file mode 100644
index 4ccca5d22f4f..000000000000
diff --git a/drivers/tty/serial/bfin_sport_uart.h b/drivers/tty/serial/bfin_sport_uart.h
deleted file mode 100644
index 4b12f45d6580..000000000000
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
deleted file mode 100644
index 4755fa696321..000000000000
--
2.9.0
Powered by blists - more mailing lists