[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e9ac3f68-2d75-6648-7774-786c20f6746c@intel.com>
Date: Thu, 15 Mar 2018 16:17:25 +0200
From: Adrian Hunter <adrian.hunter@...el.com>
To: Kishon Vijay Abraham I <kishon@...com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Tony Lindgren <tony@...mide.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Russell King <linux@...linux.org.uk>,
linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-omap@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v3 01/11] mmc: sdhci-omap: Fix when capabilities are
obtained from SDHCI_CAPABILITIES reg
On 07/03/18 15:20, Kishon Vijay Abraham I wrote:
> sdhci_omap_config_iodelay_pinctrl_state() requires caps and caps2 to be
> initialized (speed mode capabilities like UHS/HS200) before it is
> invoked. While mmc_of_parse() initializes caps/caps2 if capabilities is
> populated in device tree, it will remain uninitialized for capabilities
> obtained from SDHCI_CAPABILITIES register.
> Fix sdhci_omap_config_iodelay_pinctrl_state() to be used even while
> getting the capabilities from SDHCI_CAPABILITIES register by invoking
> sdhci_setup_host() before sdhci_omap_config_iodelay_pinctrl_state().
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
> ---
> drivers/mmc/host/sdhci-omap.c | 14 +++++++++-----
> 1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 1456abd5eeb9..3cce30584d2f 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -916,10 +916,6 @@ static int sdhci_omap_probe(struct platform_device *pdev)
> goto err_put_sync;
> }
>
> - ret = sdhci_omap_config_iodelay_pinctrl_state(omap_host);
> - if (ret)
> - goto err_put_sync;
> -
> host->mmc_host_ops.get_ro = mmc_gpio_get_ro;
> host->mmc_host_ops.start_signal_voltage_switch =
> sdhci_omap_start_signal_voltage_switch;
> @@ -930,7 +926,15 @@ static int sdhci_omap_probe(struct platform_device *pdev)
> sdhci_read_caps(host);
> host->caps |= SDHCI_CAN_DO_ADMA2;
>
> - ret = sdhci_add_host(host);
> + ret = sdhci_setup_host(host);
> + if (ret)
> + goto err_put_sync;
> +
> + ret = sdhci_omap_config_iodelay_pinctrl_state(omap_host);
> + if (ret)
> + goto err_put_sync;
> +
> + ret = __sdhci_add_host(host);
> if (ret)
> goto err_put_sync;
if __sdhci_add_host() fails, then sdhci_cleanup_host() needs to be called to
free resources allocated by sdhci_setup_host().
Powered by blists - more mailing lists