Message-ID: <1521184106-24475-1-git-send-email-aaron.wu@analog.com>
Date:   Fri, 16 Mar 2018 15:08:01 +0800
From:   Aaron Wu <aaron.wu@...log.com>
To:     <linux-kernel@...r.kernel.org>
CC:     <aaron.wu@...log.com>
Subject: [Blackfin removal] [PATCH 03/28] media: Remove Blackfin media support

Signed-off-by: Aaron Wu <aaron.wu@...log.com>

Remove Blackfin media support
---
 drivers/media/platform/Kconfig                 |   2 -
 drivers/media/platform/Makefile                |   2 -
 drivers/media/platform/blackfin/Kconfig        |  16 -
 drivers/media/platform/blackfin/Makefile       |   2 -
 drivers/media/platform/blackfin/bfin_capture.c | 989 -------------------------
 drivers/media/platform/blackfin/ppi.c          | 361 ---------
 include/media/blackfin/bfin_capture.h          |  39 -
 include/media/blackfin/ppi.h                   |  94 ---
 8 files changed, 1505 deletions(-)
 delete mode 100644 drivers/media/platform/blackfin/Kconfig
 delete mode 100644 drivers/media/platform/blackfin/Makefile
 delete mode 100644 drivers/media/platform/blackfin/bfin_capture.c
 delete mode 100644 drivers/media/platform/blackfin/ppi.c
 delete mode 100644 include/media/blackfin/bfin_capture.h
 delete mode 100644 include/media/blackfin/ppi.h

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 614fbef..00158b3 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -31,8 +31,6 @@ source "drivers/media/platform/davinci/Kconfig"
 
 source "drivers/media/platform/omap/Kconfig"
 
-source "drivers/media/platform/blackfin/Kconfig"
-
 config VIDEO_SH_VOU
 	tristate "SuperH VOU video output driver"
 	depends on MEDIA_CAMERA_SUPPORT
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index 7f30804..e2b5cb3 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -53,8 +53,6 @@ obj-$(CONFIG_VIDEO_TEGRA_HDMI_CEC)	+= tegra-cec/
 
 obj-y					+= stm32/
 
-obj-y                                   += blackfin/
-
 obj-y					+= davinci/
 
 obj-$(CONFIG_VIDEO_SH_VOU)		+= sh_vou.o
diff --git a/drivers/media/platform/blackfin/Kconfig b/drivers/media/platform/blackfin/Kconfig
deleted file mode 100644
index 68fa901..0000000
--- a/drivers/media/platform/blackfin/Kconfig
+++ /dev/null
@@ -1,16 +0,0 @@
-config VIDEO_BLACKFIN_CAPTURE
-	tristate "Blackfin Video Capture Driver"
-	depends on VIDEO_V4L2 && BLACKFIN && I2C
-	depends on HAS_DMA
-	select VIDEOBUF2_DMA_CONTIG
-	help
-	  V4L2 bridge driver for Blackfin video capture device.
-	  Choose PPI or EPPI as its interface.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_capture.
-
-config VIDEO_BLACKFIN_PPI
-	tristate
-	depends on VIDEO_BLACKFIN_CAPTURE
-	default VIDEO_BLACKFIN_CAPTURE
diff --git a/drivers/media/platform/blackfin/Makefile b/drivers/media/platform/blackfin/Makefile
deleted file mode 100644
index 30421bc..0000000
--- a/drivers/media/platform/blackfin/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-obj-$(CONFIG_VIDEO_BLACKFIN_CAPTURE) += bfin_capture.o
-obj-$(CONFIG_VIDEO_BLACKFIN_PPI)     += ppi.o
diff --git a/drivers/media/platform/blackfin/bfin_capture.c b/drivers/media/platform/blackfin/bfin_capture.c
deleted file mode 100644
index 41f1791..0000000
--- a/drivers/media/platform/blackfin/bfin_capture.c
+++ /dev/null
@@ -1,989 +0,0 @@
-/*
- * Analog Devices video capture driver
- *
- * Copyright (c) 2011 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/time.h>
-#include <linux/types.h>
-
-#include <media/v4l2-common.h>
-#include <media/v4l2-ctrls.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ioctl.h>
-#include <media/videobuf2-dma-contig.h>
-
-#include <asm/dma.h>
-
-#include <media/blackfin/bfin_capture.h>
-#include <media/blackfin/ppi.h>
-
-#define CAPTURE_DRV_NAME        "bfin_capture"
-
-struct bcap_format {
-	char *desc;
-	u32 pixelformat;
-	u32 mbus_code;
-	int bpp; /* bits per pixel */
-	int dlen; /* data length for ppi in bits */
-};
-
-struct bcap_buffer {
-	struct vb2_v4l2_buffer vb;
-	struct list_head list;
-};
-
-struct bcap_device {
-	/* capture device instance */
-	struct v4l2_device v4l2_dev;
-	/* v4l2 control handler */
-	struct v4l2_ctrl_handler ctrl_handler;
-	/* device node data */
-	struct video_device video_dev;
-	/* sub device instance */
-	struct v4l2_subdev *sd;
-	/* capture config */
-	struct bfin_capture_config *cfg;
-	/* ppi interface */
-	struct ppi_if *ppi;
-	/* current input */
-	unsigned int cur_input;
-	/* current selected standard */
-	v4l2_std_id std;
-	/* current selected dv_timings */
-	struct v4l2_dv_timings dv_timings;
-	/* used to store pixel format */
-	struct v4l2_pix_format fmt;
-	/* bits per pixel*/
-	int bpp;
-	/* data length for ppi in bits */
-	int dlen;
-	/* used to store sensor supported format */
-	struct bcap_format *sensor_formats;
-	/* number of sensor formats array */
-	int num_sensor_formats;
-	/* pointing to current video buffer */
-	struct bcap_buffer *cur_frm;
-	/* buffer queue used in videobuf2 */
-	struct vb2_queue buffer_queue;
-	/* queue of filled frames */
-	struct list_head dma_queue;
-	/* used in videobuf2 callback */
-	spinlock_t lock;
-	/* used to access capture device */
-	struct mutex mutex;
-	/* used to wait ppi to complete one transfer */
-	struct completion comp;
-	/* prepare to stop */
-	bool stop;
-	/* vb2 buffer sequence counter */
-	unsigned sequence;
-};
-
-static const struct bcap_format bcap_formats[] = {
-	{
-		.desc        = "YCbCr 4:2:2 Interleaved UYVY",
-		.pixelformat = V4L2_PIX_FMT_UYVY,
-		.mbus_code   = MEDIA_BUS_FMT_UYVY8_2X8,
-		.bpp         = 16,
-		.dlen        = 8,
-	},
-	{
-		.desc        = "YCbCr 4:2:2 Interleaved YUYV",
-		.pixelformat = V4L2_PIX_FMT_YUYV,
-		.mbus_code   = MEDIA_BUS_FMT_YUYV8_2X8,
-		.bpp         = 16,
-		.dlen        = 8,
-	},
-	{
-		.desc        = "YCbCr 4:2:2 Interleaved UYVY",
-		.pixelformat = V4L2_PIX_FMT_UYVY,
-		.mbus_code   = MEDIA_BUS_FMT_UYVY8_1X16,
-		.bpp         = 16,
-		.dlen        = 16,
-	},
-	{
-		.desc        = "RGB 565",
-		.pixelformat = V4L2_PIX_FMT_RGB565,
-		.mbus_code   = MEDIA_BUS_FMT_RGB565_2X8_LE,
-		.bpp         = 16,
-		.dlen        = 8,
-	},
-	{
-		.desc        = "RGB 444",
-		.pixelformat = V4L2_PIX_FMT_RGB444,
-		.mbus_code   = MEDIA_BUS_FMT_RGB444_2X8_PADHI_LE,
-		.bpp         = 16,
-		.dlen        = 8,
-	},
-
-};
-#define BCAP_MAX_FMTS ARRAY_SIZE(bcap_formats)
-
-static irqreturn_t bcap_isr(int irq, void *dev_id);
-
-static struct bcap_buffer *to_bcap_vb(struct vb2_v4l2_buffer *vb)
-{
-	return container_of(vb, struct bcap_buffer, vb);
-}
-
-static int bcap_init_sensor_formats(struct bcap_device *bcap_dev)
-{
-	struct v4l2_subdev_mbus_code_enum code = {
-		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
-	};
-	struct bcap_format *sf;
-	unsigned int num_formats = 0;
-	int i, j;
-
-	while (!v4l2_subdev_call(bcap_dev->sd, pad,
-				enum_mbus_code, NULL, &code)) {
-		num_formats++;
-		code.index++;
-	}
-	if (!num_formats)
-		return -ENXIO;
-
-	sf = kcalloc(num_formats, sizeof(*sf), GFP_KERNEL);
-	if (!sf)
-		return -ENOMEM;
-
-	for (i = 0; i < num_formats; i++) {
-		code.index = i;
-		v4l2_subdev_call(bcap_dev->sd, pad,
-				enum_mbus_code, NULL, &code);
-		for (j = 0; j < BCAP_MAX_FMTS; j++)
-			if (code.code == bcap_formats[j].mbus_code)
-				break;
-		if (j == BCAP_MAX_FMTS) {
-			/* we don't allow this sensor working with our bridge */
-			kfree(sf);
-			return -EINVAL;
-		}
-		sf[i] = bcap_formats[j];
-	}
-	bcap_dev->sensor_formats = sf;
-	bcap_dev->num_sensor_formats = num_formats;
-	return 0;
-}
-
-static void bcap_free_sensor_formats(struct bcap_device *bcap_dev)
-{
-	bcap_dev->num_sensor_formats = 0;
-	kfree(bcap_dev->sensor_formats);
-	bcap_dev->sensor_formats = NULL;
-}
-
-static int bcap_queue_setup(struct vb2_queue *vq,
-				unsigned int *nbuffers, unsigned int *nplanes,
-				unsigned int sizes[], struct device *alloc_devs[])
-{
-	struct bcap_device *bcap_dev = vb2_get_drv_priv(vq);
-
-	if (vq->num_buffers + *nbuffers < 2)
-		*nbuffers = 2;
-
-	if (*nplanes)
-		return sizes[0] < bcap_dev->fmt.sizeimage ? -EINVAL : 0;
-
-	*nplanes = 1;
-	sizes[0] = bcap_dev->fmt.sizeimage;
-
-	return 0;
-}
-
-static int bcap_buffer_prepare(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue);
-	unsigned long size = bcap_dev->fmt.sizeimage;
-
-	if (vb2_plane_size(vb, 0) < size) {
-		v4l2_err(&bcap_dev->v4l2_dev, "buffer too small (%lu < %lu)\n",
-				vb2_plane_size(vb, 0), size);
-		return -EINVAL;
-	}
-	vb2_set_plane_payload(vb, 0, size);
-
-	vbuf->field = bcap_dev->fmt.field;
-
-	return 0;
-}
-
-static void bcap_buffer_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct bcap_buffer *buf = to_bcap_vb(vbuf);
-	unsigned long flags;
-
-	spin_lock_irqsave(&bcap_dev->lock, flags);
-	list_add_tail(&buf->list, &bcap_dev->dma_queue);
-	spin_unlock_irqrestore(&bcap_dev->lock, flags);
-}
-
-static void bcap_buffer_cleanup(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	struct bcap_device *bcap_dev = vb2_get_drv_priv(vb->vb2_queue);
-	struct bcap_buffer *buf = to_bcap_vb(vbuf);
-	unsigned long flags;
-
-	spin_lock_irqsave(&bcap_dev->lock, flags);
-	list_del_init(&buf->list);
-	spin_unlock_irqrestore(&bcap_dev->lock, flags);
-}
-
-static int bcap_start_streaming(struct vb2_queue *vq, unsigned int count)
-{
-	struct bcap_device *bcap_dev = vb2_get_drv_priv(vq);
-	struct ppi_if *ppi = bcap_dev->ppi;
-	struct bcap_buffer *buf, *tmp;
-	struct ppi_params params;
-	dma_addr_t addr;
-	int ret;
-
-	/* enable streamon on the sub device */
-	ret = v4l2_subdev_call(bcap_dev->sd, video, s_stream, 1);
-	if (ret && (ret != -ENOIOCTLCMD)) {
-		v4l2_err(&bcap_dev->v4l2_dev, "stream on failed in subdev\n");
-		goto err;
-	}
-
-	/* set ppi params */
-	params.width = bcap_dev->fmt.width;
-	params.height = bcap_dev->fmt.height;
-	params.bpp = bcap_dev->bpp;
-	params.dlen = bcap_dev->dlen;
-	params.ppi_control = bcap_dev->cfg->ppi_control;
-	params.int_mask = bcap_dev->cfg->int_mask;
-	if (bcap_dev->cfg->inputs[bcap_dev->cur_input].capabilities
-			& V4L2_IN_CAP_DV_TIMINGS) {
-		struct v4l2_bt_timings *bt = &bcap_dev->dv_timings.bt;
-
-		params.hdelay = bt->hsync + bt->hbackporch;
-		params.vdelay = bt->vsync + bt->vbackporch;
-		params.line = V4L2_DV_BT_FRAME_WIDTH(bt);
-		params.frame = V4L2_DV_BT_FRAME_HEIGHT(bt);
-	} else if (bcap_dev->cfg->inputs[bcap_dev->cur_input].capabilities
-			& V4L2_IN_CAP_STD) {
-		params.hdelay = 0;
-		params.vdelay = 0;
-		if (bcap_dev->std & V4L2_STD_525_60) {
-			params.line = 858;
-			params.frame = 525;
-		} else {
-			params.line = 864;
-			params.frame = 625;
-		}
-	} else {
-		params.hdelay = 0;
-		params.vdelay = 0;
-		params.line = params.width + bcap_dev->cfg->blank_pixels;
-		params.frame = params.height;
-	}
-	ret = ppi->ops->set_params(ppi, &params);
-	if (ret < 0) {
-		v4l2_err(&bcap_dev->v4l2_dev,
-				"Error in setting ppi params\n");
-		goto err;
-	}
-
-	/* attach ppi DMA irq handler */
-	ret = ppi->ops->attach_irq(ppi, bcap_isr);
-	if (ret < 0) {
-		v4l2_err(&bcap_dev->v4l2_dev,
-				"Error in attaching interrupt handler\n");
-		goto err;
-	}
-
-	bcap_dev->sequence = 0;
-
-	reinit_completion(&bcap_dev->comp);
-	bcap_dev->stop = false;
-
-	/* get the next frame from the dma queue */
-	bcap_dev->cur_frm = list_entry(bcap_dev->dma_queue.next,
-					struct bcap_buffer, list);
-	/* remove buffer from the dma queue */
-	list_del_init(&bcap_dev->cur_frm->list);
-	addr = vb2_dma_contig_plane_dma_addr(&bcap_dev->cur_frm->vb.vb2_buf,
-						0);
-	/* update DMA address */
-	ppi->ops->update_addr(ppi, (unsigned long)addr);
-	/* enable ppi */
-	ppi->ops->start(ppi);
-
-	return 0;
-
-err:
-	list_for_each_entry_safe(buf, tmp, &bcap_dev->dma_queue, list) {
-		list_del(&buf->list);
-		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
-	}
-
-	return ret;
-}
-
-static void bcap_stop_streaming(struct vb2_queue *vq)
-{
-	struct bcap_device *bcap_dev = vb2_get_drv_priv(vq);
-	struct ppi_if *ppi = bcap_dev->ppi;
-	int ret;
-
-	bcap_dev->stop = true;
-	wait_for_completion(&bcap_dev->comp);
-	ppi->ops->stop(ppi);
-	ppi->ops->detach_irq(ppi);
-	ret = v4l2_subdev_call(bcap_dev->sd, video, s_stream, 0);
-	if (ret && (ret != -ENOIOCTLCMD))
-		v4l2_err(&bcap_dev->v4l2_dev,
-				"stream off failed in subdev\n");
-
-	/* release all active buffers */
-	if (bcap_dev->cur_frm)
-		vb2_buffer_done(&bcap_dev->cur_frm->vb.vb2_buf,
-				VB2_BUF_STATE_ERROR);
-
-	while (!list_empty(&bcap_dev->dma_queue)) {
-		bcap_dev->cur_frm = list_entry(bcap_dev->dma_queue.next,
-						struct bcap_buffer, list);
-		list_del_init(&bcap_dev->cur_frm->list);
-		vb2_buffer_done(&bcap_dev->cur_frm->vb.vb2_buf,
-				VB2_BUF_STATE_ERROR);
-	}
-}
-
-static const struct vb2_ops bcap_video_qops = {
-	.queue_setup            = bcap_queue_setup,
-	.buf_prepare            = bcap_buffer_prepare,
-	.buf_cleanup            = bcap_buffer_cleanup,
-	.buf_queue              = bcap_buffer_queue,
-	.wait_prepare           = vb2_ops_wait_prepare,
-	.wait_finish            = vb2_ops_wait_finish,
-	.start_streaming        = bcap_start_streaming,
-	.stop_streaming         = bcap_stop_streaming,
-};
-
-static irqreturn_t bcap_isr(int irq, void *dev_id)
-{
-	struct ppi_if *ppi = dev_id;
-	struct bcap_device *bcap_dev = ppi->priv;
-	struct vb2_v4l2_buffer *vbuf = &bcap_dev->cur_frm->vb;
-	struct vb2_buffer *vb = &vbuf->vb2_buf;
-	dma_addr_t addr;
-
-	spin_lock(&bcap_dev->lock);
-
-	if (!list_empty(&bcap_dev->dma_queue)) {
-		vb->timestamp = ktime_get_ns();
-		if (ppi->err) {
-			vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
-			ppi->err = false;
-		} else {
-			vbuf->sequence = bcap_dev->sequence++;
-			vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
-		}
-		bcap_dev->cur_frm = list_entry(bcap_dev->dma_queue.next,
-				struct bcap_buffer, list);
-		list_del_init(&bcap_dev->cur_frm->list);
-	} else {
-		/* clear error flag, we will get a new frame */
-		if (ppi->err)
-			ppi->err = false;
-	}
-
-	ppi->ops->stop(ppi);
-
-	if (bcap_dev->stop) {
-		complete(&bcap_dev->comp);
-	} else {
-		addr = vb2_dma_contig_plane_dma_addr(
-				&bcap_dev->cur_frm->vb.vb2_buf, 0);
-		ppi->ops->update_addr(ppi, (unsigned long)addr);
-		ppi->ops->start(ppi);
-	}
-
-	spin_unlock(&bcap_dev->lock);
-
-	return IRQ_HANDLED;
-}
-
-static int bcap_querystd(struct file *file, void *priv, v4l2_std_id *std)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct v4l2_input input;
-
-	input = bcap_dev->cfg->inputs[bcap_dev->cur_input];
-	if (!(input.capabilities & V4L2_IN_CAP_STD))
-		return -ENODATA;
-
-	return v4l2_subdev_call(bcap_dev->sd, video, querystd, std);
-}
-
-static int bcap_g_std(struct file *file, void *priv, v4l2_std_id *std)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct v4l2_input input;
-
-	input = bcap_dev->cfg->inputs[bcap_dev->cur_input];
-	if (!(input.capabilities & V4L2_IN_CAP_STD))
-		return -ENODATA;
-
-	*std = bcap_dev->std;
-	return 0;
-}
-
-static int bcap_s_std(struct file *file, void *priv, v4l2_std_id std)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct v4l2_input input;
-	int ret;
-
-	input = bcap_dev->cfg->inputs[bcap_dev->cur_input];
-	if (!(input.capabilities & V4L2_IN_CAP_STD))
-		return -ENODATA;
-
-	if (vb2_is_busy(&bcap_dev->buffer_queue))
-		return -EBUSY;
-
-	ret = v4l2_subdev_call(bcap_dev->sd, video, s_std, std);
-	if (ret < 0)
-		return ret;
-
-	bcap_dev->std = std;
-	return 0;
-}
-
-static int bcap_enum_dv_timings(struct file *file, void *priv,
-				struct v4l2_enum_dv_timings *timings)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct v4l2_input input;
-
-	input = bcap_dev->cfg->inputs[bcap_dev->cur_input];
-	if (!(input.capabilities & V4L2_IN_CAP_DV_TIMINGS))
-		return -ENODATA;
-
-	timings->pad = 0;
-
-	return v4l2_subdev_call(bcap_dev->sd, pad,
-			enum_dv_timings, timings);
-}
-
-static int bcap_query_dv_timings(struct file *file, void *priv,
-				struct v4l2_dv_timings *timings)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct v4l2_input input;
-
-	input = bcap_dev->cfg->inputs[bcap_dev->cur_input];
-	if (!(input.capabilities & V4L2_IN_CAP_DV_TIMINGS))
-		return -ENODATA;
-
-	return v4l2_subdev_call(bcap_dev->sd, video,
-				query_dv_timings, timings);
-}
-
-static int bcap_g_dv_timings(struct file *file, void *priv,
-				struct v4l2_dv_timings *timings)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct v4l2_input input;
-
-	input = bcap_dev->cfg->inputs[bcap_dev->cur_input];
-	if (!(input.capabilities & V4L2_IN_CAP_DV_TIMINGS))
-		return -ENODATA;
-
-	*timings = bcap_dev->dv_timings;
-	return 0;
-}
-
-static int bcap_s_dv_timings(struct file *file, void *priv,
-				struct v4l2_dv_timings *timings)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct v4l2_input input;
-	int ret;
-
-	input = bcap_dev->cfg->inputs[bcap_dev->cur_input];
-	if (!(input.capabilities & V4L2_IN_CAP_DV_TIMINGS))
-		return -ENODATA;
-
-	if (vb2_is_busy(&bcap_dev->buffer_queue))
-		return -EBUSY;
-
-	ret = v4l2_subdev_call(bcap_dev->sd, video, s_dv_timings, timings);
-	if (ret < 0)
-		return ret;
-
-	bcap_dev->dv_timings = *timings;
-	return 0;
-}
-
-static int bcap_enum_input(struct file *file, void *priv,
-				struct v4l2_input *input)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct bfin_capture_config *config = bcap_dev->cfg;
-	int ret;
-	u32 status;
-
-	if (input->index >= config->num_inputs)
-		return -EINVAL;
-
-	*input = config->inputs[input->index];
-	/* get input status */
-	ret = v4l2_subdev_call(bcap_dev->sd, video, g_input_status, &status);
-	if (!ret)
-		input->status = status;
-	return 0;
-}
-
-static int bcap_g_input(struct file *file, void *priv, unsigned int *index)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-
-	*index = bcap_dev->cur_input;
-	return 0;
-}
-
-static int bcap_s_input(struct file *file, void *priv, unsigned int index)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct bfin_capture_config *config = bcap_dev->cfg;
-	struct bcap_route *route;
-	int ret;
-
-	if (vb2_is_busy(&bcap_dev->buffer_queue))
-		return -EBUSY;
-
-	if (index >= config->num_inputs)
-		return -EINVAL;
-
-	route = &config->routes[index];
-	ret = v4l2_subdev_call(bcap_dev->sd, video, s_routing,
-				route->input, route->output, 0);
-	if ((ret < 0) && (ret != -ENOIOCTLCMD)) {
-		v4l2_err(&bcap_dev->v4l2_dev, "Failed to set input\n");
-		return ret;
-	}
-	bcap_dev->cur_input = index;
-	/* if this route has specific config, update ppi control */
-	if (route->ppi_control)
-		config->ppi_control = route->ppi_control;
-	return 0;
-}
-
-static int bcap_try_format(struct bcap_device *bcap,
-				struct v4l2_pix_format *pixfmt,
-				struct bcap_format *bcap_fmt)
-{
-	struct bcap_format *sf = bcap->sensor_formats;
-	struct bcap_format *fmt = NULL;
-	struct v4l2_subdev_pad_config pad_cfg;
-	struct v4l2_subdev_format format = {
-		.which = V4L2_SUBDEV_FORMAT_TRY,
-	};
-	int ret, i;
-
-	for (i = 0; i < bcap->num_sensor_formats; i++) {
-		fmt = &sf[i];
-		if (pixfmt->pixelformat == fmt->pixelformat)
-			break;
-	}
-	if (i == bcap->num_sensor_formats)
-		fmt = &sf[0];
-
-	v4l2_fill_mbus_format(&format.format, pixfmt, fmt->mbus_code);
-	ret = v4l2_subdev_call(bcap->sd, pad, set_fmt, &pad_cfg,
-				&format);
-	if (ret < 0)
-		return ret;
-	v4l2_fill_pix_format(pixfmt, &format.format);
-	if (bcap_fmt) {
-		for (i = 0; i < bcap->num_sensor_formats; i++) {
-			fmt = &sf[i];
-			if (format.format.code == fmt->mbus_code)
-				break;
-		}
-		*bcap_fmt = *fmt;
-	}
-	pixfmt->bytesperline = pixfmt->width * fmt->bpp / 8;
-	pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
-	return 0;
-}
-
-static int bcap_enum_fmt_vid_cap(struct file *file, void  *priv,
-					struct v4l2_fmtdesc *fmt)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct bcap_format *sf = bcap_dev->sensor_formats;
-
-	if (fmt->index >= bcap_dev->num_sensor_formats)
-		return -EINVAL;
-
-	fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	strlcpy(fmt->description,
-		sf[fmt->index].desc,
-		sizeof(fmt->description));
-	fmt->pixelformat = sf[fmt->index].pixelformat;
-	return 0;
-}
-
-static int bcap_try_fmt_vid_cap(struct file *file, void *priv,
-					struct v4l2_format *fmt)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
-
-	return bcap_try_format(bcap_dev, pixfmt, NULL);
-}
-
-static int bcap_g_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-
-	fmt->fmt.pix = bcap_dev->fmt;
-	return 0;
-}
-
-static int bcap_s_fmt_vid_cap(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	struct v4l2_subdev_format format = {
-		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
-	};
-	struct bcap_format bcap_fmt;
-	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
-	int ret;
-
-	if (vb2_is_busy(&bcap_dev->buffer_queue))
-		return -EBUSY;
-
-	/* see if format works */
-	ret = bcap_try_format(bcap_dev, pixfmt, &bcap_fmt);
-	if (ret < 0)
-		return ret;
-
-	v4l2_fill_mbus_format(&format.format, pixfmt, bcap_fmt.mbus_code);
-	ret = v4l2_subdev_call(bcap_dev->sd, pad, set_fmt, NULL, &format);
-	if (ret < 0)
-		return ret;
-	bcap_dev->fmt = *pixfmt;
-	bcap_dev->bpp = bcap_fmt.bpp;
-	bcap_dev->dlen = bcap_fmt.dlen;
-	return 0;
-}
-
-static int bcap_querycap(struct file *file, void  *priv,
-				struct v4l2_capability *cap)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-
-	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING;
-	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
-	strlcpy(cap->driver, CAPTURE_DRV_NAME, sizeof(cap->driver));
-	strlcpy(cap->bus_info, "Blackfin Platform", sizeof(cap->bus_info));
-	strlcpy(cap->card, bcap_dev->cfg->card_name, sizeof(cap->card));
-	return 0;
-}
-
-static int bcap_g_parm(struct file *file, void *fh,
-				struct v4l2_streamparm *a)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-
-	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	return v4l2_subdev_call(bcap_dev->sd, video, g_parm, a);
-}
-
-static int bcap_s_parm(struct file *file, void *fh,
-				struct v4l2_streamparm *a)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-
-	if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
-		return -EINVAL;
-	return v4l2_subdev_call(bcap_dev->sd, video, s_parm, a);
-}
-
-static int bcap_log_status(struct file *file, void *priv)
-{
-	struct bcap_device *bcap_dev = video_drvdata(file);
-	/* status for sub devices */
-	v4l2_device_call_all(&bcap_dev->v4l2_dev, 0, core, log_status);
-	return 0;
-}
-
-static const struct v4l2_ioctl_ops bcap_ioctl_ops = {
-	.vidioc_querycap         = bcap_querycap,
-	.vidioc_g_fmt_vid_cap    = bcap_g_fmt_vid_cap,
-	.vidioc_enum_fmt_vid_cap = bcap_enum_fmt_vid_cap,
-	.vidioc_s_fmt_vid_cap    = bcap_s_fmt_vid_cap,
-	.vidioc_try_fmt_vid_cap  = bcap_try_fmt_vid_cap,
-	.vidioc_enum_input       = bcap_enum_input,
-	.vidioc_g_input          = bcap_g_input,
-	.vidioc_s_input          = bcap_s_input,
-	.vidioc_querystd         = bcap_querystd,
-	.vidioc_s_std            = bcap_s_std,
-	.vidioc_g_std            = bcap_g_std,
-	.vidioc_s_dv_timings     = bcap_s_dv_timings,
-	.vidioc_g_dv_timings     = bcap_g_dv_timings,
-	.vidioc_query_dv_timings = bcap_query_dv_timings,
-	.vidioc_enum_dv_timings  = bcap_enum_dv_timings,
-	.vidioc_reqbufs          = vb2_ioctl_reqbufs,
-	.vidioc_create_bufs      = vb2_ioctl_create_bufs,
-	.vidioc_querybuf         = vb2_ioctl_querybuf,
-	.vidioc_qbuf             = vb2_ioctl_qbuf,
-	.vidioc_dqbuf            = vb2_ioctl_dqbuf,
-	.vidioc_expbuf           = vb2_ioctl_expbuf,
-	.vidioc_streamon         = vb2_ioctl_streamon,
-	.vidioc_streamoff        = vb2_ioctl_streamoff,
-	.vidioc_g_parm           = bcap_g_parm,
-	.vidioc_s_parm           = bcap_s_parm,
-	.vidioc_log_status       = bcap_log_status,
-};
-
-static const struct v4l2_file_operations bcap_fops = {
-	.owner = THIS_MODULE,
-	.open = v4l2_fh_open,
-	.release = vb2_fop_release,
-	.unlocked_ioctl = video_ioctl2,
-	.mmap = vb2_fop_mmap,
-#ifndef CONFIG_MMU
-	.get_unmapped_area = vb2_fop_get_unmapped_area,
-#endif
-	.poll = vb2_fop_poll
-};
-
-static int bcap_probe(struct platform_device *pdev)
-{
-	struct bcap_device *bcap_dev;
-	struct video_device *vfd;
-	struct i2c_adapter *i2c_adap;
-	struct bfin_capture_config *config;
-	struct vb2_queue *q;
-	struct bcap_route *route;
-	int ret;
-
-	config = pdev->dev.platform_data;
-	if (!config || !config->num_inputs) {
-		v4l2_err(pdev->dev.driver, "Unable to get board config\n");
-		return -ENODEV;
-	}
-
-	bcap_dev = kzalloc(sizeof(*bcap_dev), GFP_KERNEL);
-	if (!bcap_dev)
-		return -ENOMEM;
-
-	bcap_dev->cfg = config;
-
-	bcap_dev->ppi = ppi_create_instance(pdev, config->ppi_info);
-	if (!bcap_dev->ppi) {
-		v4l2_err(pdev->dev.driver, "Unable to create ppi\n");
-		ret = -ENODEV;
-		goto err_free_dev;
-	}
-	bcap_dev->ppi->priv = bcap_dev;
-
-	vfd = &bcap_dev->video_dev;
-	/* initialize field of video device */
-	vfd->release            = video_device_release_empty;
-	vfd->fops               = &bcap_fops;
-	vfd->ioctl_ops          = &bcap_ioctl_ops;
-	vfd->tvnorms            = 0;
-	vfd->v4l2_dev           = &bcap_dev->v4l2_dev;
-	strncpy(vfd->name, CAPTURE_DRV_NAME, sizeof(vfd->name));
-
-	ret = v4l2_device_register(&pdev->dev, &bcap_dev->v4l2_dev);
-	if (ret) {
-		v4l2_err(pdev->dev.driver,
-				"Unable to register v4l2 device\n");
-		goto err_free_ppi;
-	}
-	v4l2_info(&bcap_dev->v4l2_dev, "v4l2 device registered\n");
-
-	bcap_dev->v4l2_dev.ctrl_handler = &bcap_dev->ctrl_handler;
-	ret = v4l2_ctrl_handler_init(&bcap_dev->ctrl_handler, 0);
-	if (ret) {
-		v4l2_err(&bcap_dev->v4l2_dev,
-				"Unable to init control handler\n");
-		goto err_unreg_v4l2;
-	}
-
-	spin_lock_init(&bcap_dev->lock);
-	/* initialize queue */
-	q = &bcap_dev->buffer_queue;
-	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
-	q->io_modes = VB2_MMAP | VB2_DMABUF;
-	q->drv_priv = bcap_dev;
-	q->buf_struct_size = sizeof(struct bcap_buffer);
-	q->ops = &bcap_video_qops;
-	q->mem_ops = &vb2_dma_contig_memops;
-	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
-	q->lock = &bcap_dev->mutex;
-	q->min_buffers_needed = 1;
-	q->dev = &pdev->dev;
-
-	ret = vb2_queue_init(q);
-	if (ret)
-		goto err_free_handler;
-
-	mutex_init(&bcap_dev->mutex);
-	init_completion(&bcap_dev->comp);
-
-	/* init video dma queues */
-	INIT_LIST_HEAD(&bcap_dev->dma_queue);
-
-	vfd->lock = &bcap_dev->mutex;
-	vfd->queue = q;
-
-	/* register video device */
-	ret = video_register_device(&bcap_dev->video_dev, VFL_TYPE_GRABBER, -1);
-	if (ret) {
-		v4l2_err(&bcap_dev->v4l2_dev,
-				"Unable to register video device\n");
-		goto err_free_handler;
-	}
-	video_set_drvdata(&bcap_dev->video_dev, bcap_dev);
-	v4l2_info(&bcap_dev->v4l2_dev, "video device registered as: %s\n",
-			video_device_node_name(vfd));
-
-	/* load up the subdevice */
-	i2c_adap = i2c_get_adapter(config->i2c_adapter_id);
-	if (!i2c_adap) {
-		v4l2_err(&bcap_dev->v4l2_dev,
-				"Unable to find i2c adapter\n");
-		ret = -ENODEV;
-		goto err_unreg_vdev;
-
-	}
-	bcap_dev->sd = v4l2_i2c_new_subdev_board(&bcap_dev->v4l2_dev,
-						 i2c_adap,
-						 &config->board_info,
-						 NULL);
-	if (bcap_dev->sd) {
-		int i;
-
-		/* update tvnorms from the sub devices */
-		for (i = 0; i < config->num_inputs; i++)
-			vfd->tvnorms |= config->inputs[i].std;
-	} else {
-		v4l2_err(&bcap_dev->v4l2_dev,
-				"Unable to register sub device\n");
-		ret = -ENODEV;
-		goto err_unreg_vdev;
-	}
-
-	v4l2_info(&bcap_dev->v4l2_dev, "v4l2 sub device registered\n");
-
-	/*
-	 * explicitly set input, otherwise some boards
-	 * may not work at the state as we expected
-	 */
-	route = &config->routes[0];
-	ret = v4l2_subdev_call(bcap_dev->sd, video, s_routing,
-				route->input, route->output, 0);
-	if ((ret < 0) && (ret != -ENOIOCTLCMD)) {
-		v4l2_err(&bcap_dev->v4l2_dev, "Failed to set input\n");
-		goto err_unreg_vdev;
-	}
-	bcap_dev->cur_input = 0;
-	/* if this route has specific config, update ppi control */
-	if (route->ppi_control)
-		config->ppi_control = route->ppi_control;
-
-	/* now we can probe the default state */
-	if (config->inputs[0].capabilities & V4L2_IN_CAP_STD) {
-		v4l2_std_id std;
-		ret = v4l2_subdev_call(bcap_dev->sd, video, g_std, &std);
-		if (ret) {
-			v4l2_err(&bcap_dev->v4l2_dev,
-					"Unable to get std\n");
-			goto err_unreg_vdev;
-		}
-		bcap_dev->std = std;
-	}
-	if (config->inputs[0].capabilities & V4L2_IN_CAP_DV_TIMINGS) {
-		struct v4l2_dv_timings dv_timings;
-		ret = v4l2_subdev_call(bcap_dev->sd, video,
-				g_dv_timings, &dv_timings);
-		if (ret) {
-			v4l2_err(&bcap_dev->v4l2_dev,
-					"Unable to get dv timings\n");
-			goto err_unreg_vdev;
-		}
-		bcap_dev->dv_timings = dv_timings;
-	}
-	ret = bcap_init_sensor_formats(bcap_dev);
-	if (ret) {
-		v4l2_err(&bcap_dev->v4l2_dev,
-				"Unable to create sensor formats table\n");
-		goto err_unreg_vdev;
-	}
-	return 0;
-err_unreg_vdev:
-	video_unregister_device(&bcap_dev->video_dev);
-err_free_handler:
-	v4l2_ctrl_handler_free(&bcap_dev->ctrl_handler);
-err_unreg_v4l2:
-	v4l2_device_unregister(&bcap_dev->v4l2_dev);
-err_free_ppi:
-	ppi_delete_instance(bcap_dev->ppi);
-err_free_dev:
-	kfree(bcap_dev);
-	return ret;
-}
-
-static int bcap_remove(struct platform_device *pdev)
-{
-	struct v4l2_device *v4l2_dev = platform_get_drvdata(pdev);
-	struct bcap_device *bcap_dev = container_of(v4l2_dev,
-						struct bcap_device, v4l2_dev);
-
-	bcap_free_sensor_formats(bcap_dev);
-	video_unregister_device(&bcap_dev->video_dev);
-	v4l2_ctrl_handler_free(&bcap_dev->ctrl_handler);
-	v4l2_device_unregister(v4l2_dev);
-	ppi_delete_instance(bcap_dev->ppi);
-	kfree(bcap_dev);
-	return 0;
-}
-
-static struct platform_driver bcap_driver = {
-	.driver = {
-		.name  = CAPTURE_DRV_NAME,
-	},
-	.probe = bcap_probe,
-	.remove = bcap_remove,
-};
-module_platform_driver(bcap_driver);
-
-MODULE_DESCRIPTION("Analog Devices blackfin video capture driver");
-MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@...il.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/media/platform/blackfin/ppi.c b/drivers/media/platform/blackfin/ppi.c
deleted file mode 100644
index d3dc765..0000000
--- a/drivers/media/platform/blackfin/ppi.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * ppi.c Analog Devices Parallel Peripheral Interface driver
- *
- * Copyright (c) 2011 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-
-#include <asm/bfin_ppi.h>
-#include <asm/blackfin.h>
-#include <asm/cacheflush.h>
-#include <asm/dma.h>
-#include <asm/portmux.h>
-
-#include <media/blackfin/ppi.h>
-
-static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler);
-static void ppi_detach_irq(struct ppi_if *ppi);
-static int ppi_start(struct ppi_if *ppi);
-static int ppi_stop(struct ppi_if *ppi);
-static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params);
-static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr);
-
-static const struct ppi_ops ppi_ops = {
-	.attach_irq = ppi_attach_irq,
-	.detach_irq = ppi_detach_irq,
-	.start = ppi_start,
-	.stop = ppi_stop,
-	.set_params = ppi_set_params,
-	.update_addr = ppi_update_addr,
-};
-
-static irqreturn_t ppi_irq_err(int irq, void *dev_id)
-{
-	struct ppi_if *ppi = dev_id;
-	const struct ppi_info *info = ppi->info;
-
-	switch (info->type) {
-	case PPI_TYPE_PPI:
-	{
-		struct bfin_ppi_regs *reg = info->base;
-		unsigned short status;
-
-		/* register on bf561 is cleared when read
-		 * others are W1C
-		 */
-		status = bfin_read16(&reg->status);
-		if (status & 0x3000)
-			ppi->err = true;
-		bfin_write16(&reg->status, 0xff00);
-		break;
-	}
-	case PPI_TYPE_EPPI:
-	{
-		struct bfin_eppi_regs *reg = info->base;
-		unsigned short status;
-
-		status = bfin_read16(&reg->status);
-		if (status & 0x2)
-			ppi->err = true;
-		bfin_write16(&reg->status, 0xffff);
-		break;
-	}
-	case PPI_TYPE_EPPI3:
-	{
-		struct bfin_eppi3_regs *reg = info->base;
-		unsigned long stat;
-
-		stat = bfin_read32(&reg->stat);
-		if (stat & 0x2)
-			ppi->err = true;
-		bfin_write32(&reg->stat, 0xc0ff);
-		break;
-	}
-	default:
-		break;
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int ppi_attach_irq(struct ppi_if *ppi, irq_handler_t handler)
-{
-	const struct ppi_info *info = ppi->info;
-	int ret;
-
-	ret = request_dma(info->dma_ch, "PPI_DMA");
-
-	if (ret) {
-		pr_err("Unable to allocate DMA channel for PPI\n");
-		return ret;
-	}
-	set_dma_callback(info->dma_ch, handler, ppi);
-
-	if (ppi->err_int) {
-		ret = request_irq(info->irq_err, ppi_irq_err, 0, "PPI ERROR", ppi);
-		if (ret) {
-			pr_err("Unable to allocate IRQ for PPI\n");
-			free_dma(info->dma_ch);
-		}
-	}
-	return ret;
-}
-
-static void ppi_detach_irq(struct ppi_if *ppi)
-{
-	const struct ppi_info *info = ppi->info;
-
-	if (ppi->err_int)
-		free_irq(info->irq_err, ppi);
-	free_dma(info->dma_ch);
-}
-
-static int ppi_start(struct ppi_if *ppi)
-{
-	const struct ppi_info *info = ppi->info;
-
-	/* enable DMA */
-	enable_dma(info->dma_ch);
-
-	/* enable PPI */
-	ppi->ppi_control |= PORT_EN;
-	switch (info->type) {
-	case PPI_TYPE_PPI:
-	{
-		struct bfin_ppi_regs *reg = info->base;
-		bfin_write16(&reg->control, ppi->ppi_control);
-		break;
-	}
-	case PPI_TYPE_EPPI:
-	{
-		struct bfin_eppi_regs *reg = info->base;
-		bfin_write32(&reg->control, ppi->ppi_control);
-		break;
-	}
-	case PPI_TYPE_EPPI3:
-	{
-		struct bfin_eppi3_regs *reg = info->base;
-		bfin_write32(&reg->ctl, ppi->ppi_control);
-		break;
-	}
-	default:
-		return -EINVAL;
-	}
-
-	SSYNC();
-	return 0;
-}
-
-static int ppi_stop(struct ppi_if *ppi)
-{
-	const struct ppi_info *info = ppi->info;
-
-	/* disable PPI */
-	ppi->ppi_control &= ~PORT_EN;
-	switch (info->type) {
-	case PPI_TYPE_PPI:
-	{
-		struct bfin_ppi_regs *reg = info->base;
-		bfin_write16(&reg->control, ppi->ppi_control);
-		break;
-	}
-	case PPI_TYPE_EPPI:
-	{
-		struct bfin_eppi_regs *reg = info->base;
-		bfin_write32(&reg->control, ppi->ppi_control);
-		break;
-	}
-	case PPI_TYPE_EPPI3:
-	{
-		struct bfin_eppi3_regs *reg = info->base;
-		bfin_write32(&reg->ctl, ppi->ppi_control);
-		break;
-	}
-	default:
-		return -EINVAL;
-	}
-
-	/* disable DMA */
-	clear_dma_irqstat(info->dma_ch);
-	disable_dma(info->dma_ch);
-
-	SSYNC();
-	return 0;
-}
-
-static int ppi_set_params(struct ppi_if *ppi, struct ppi_params *params)
-{
-	const struct ppi_info *info = ppi->info;
-	int dma32 = 0;
-	int dma_config, bytes_per_line;
-	int hcount, hdelay, samples_per_line;
-
-#ifdef CONFIG_PINCTRL
-	static const char * const pin_state[] = {"8bit", "16bit", "24bit"};
-	struct pinctrl *pctrl;
-	struct pinctrl_state *pstate;
-
-	if (params->dlen > 24 || params->dlen <= 0)
-		return -EINVAL;
-	pctrl = devm_pinctrl_get(ppi->dev);
-	if (IS_ERR(pctrl))
-		return PTR_ERR(pctrl);
-	pstate = pinctrl_lookup_state(pctrl,
-				      pin_state[(params->dlen + 7) / 8 - 1]);
-	if (pinctrl_select_state(pctrl, pstate))
-		return -EINVAL;
-#endif
-
-	bytes_per_line = params->width * params->bpp / 8;
-	/* convert parameters unit from pixels to samples */
-	hcount = params->width * params->bpp / params->dlen;
-	hdelay = params->hdelay * params->bpp / params->dlen;
-	samples_per_line = params->line * params->bpp / params->dlen;
-	if (params->int_mask == 0xFFFFFFFF)
-		ppi->err_int = false;
-	else
-		ppi->err_int = true;
-
-	dma_config = (DMA_FLOW_STOP | RESTART | DMA2D | DI_EN_Y);
-	ppi->ppi_control = params->ppi_control & ~PORT_EN;
-	if (!(ppi->ppi_control & PORT_DIR))
-		dma_config |= WNR;
-	switch (info->type) {
-	case PPI_TYPE_PPI:
-	{
-		struct bfin_ppi_regs *reg = info->base;
-
-		if (params->ppi_control & DMA32)
-			dma32 = 1;
-
-		bfin_write16(&reg->control, ppi->ppi_control);
-		bfin_write16(&reg->count, samples_per_line - 1);
-		bfin_write16(&reg->frame, params->frame);
-		break;
-	}
-	case PPI_TYPE_EPPI:
-	{
-		struct bfin_eppi_regs *reg = info->base;
-
-		if ((params->ppi_control & PACK_EN)
-			|| (params->ppi_control & 0x38000) > DLEN_16)
-			dma32 = 1;
-
-		bfin_write32(&reg->control, ppi->ppi_control);
-		bfin_write16(&reg->line, samples_per_line);
-		bfin_write16(&reg->frame, params->frame);
-		bfin_write16(&reg->hdelay, hdelay);
-		bfin_write16(&reg->vdelay, params->vdelay);
-		bfin_write16(&reg->hcount, hcount);
-		bfin_write16(&reg->vcount, params->height);
-		break;
-	}
-	case PPI_TYPE_EPPI3:
-	{
-		struct bfin_eppi3_regs *reg = info->base;
-
-		if ((params->ppi_control & PACK_EN)
-			|| (params->ppi_control & 0x70000) > DLEN_16)
-			dma32 = 1;
-
-		bfin_write32(&reg->ctl, ppi->ppi_control);
-		bfin_write32(&reg->line, samples_per_line);
-		bfin_write32(&reg->frame, params->frame);
-		bfin_write32(&reg->hdly, hdelay);
-		bfin_write32(&reg->vdly, params->vdelay);
-		bfin_write32(&reg->hcnt, hcount);
-		bfin_write32(&reg->vcnt, params->height);
-		if (params->int_mask)
-			bfin_write32(&reg->imsk, params->int_mask & 0xFF);
-		if (ppi->ppi_control & PORT_DIR) {
-			u32 hsync_width, vsync_width, vsync_period;
-
-			hsync_width = params->hsync
-					* params->bpp / params->dlen;
-			vsync_width = params->vsync * samples_per_line;
-			vsync_period = samples_per_line * params->frame;
-			bfin_write32(&reg->fs1_wlhb, hsync_width);
-			bfin_write32(&reg->fs1_paspl, samples_per_line);
-			bfin_write32(&reg->fs2_wlvb, vsync_width);
-			bfin_write32(&reg->fs2_palpf, vsync_period);
-		}
-		break;
-	}
-	default:
-		return -EINVAL;
-	}
-
-	if (dma32) {
-		dma_config |= WDSIZE_32 | PSIZE_32;
-		set_dma_x_count(info->dma_ch, bytes_per_line >> 2);
-		set_dma_x_modify(info->dma_ch, 4);
-		set_dma_y_modify(info->dma_ch, 4);
-	} else {
-		dma_config |= WDSIZE_16 | PSIZE_16;
-		set_dma_x_count(info->dma_ch, bytes_per_line >> 1);
-		set_dma_x_modify(info->dma_ch, 2);
-		set_dma_y_modify(info->dma_ch, 2);
-	}
-	set_dma_y_count(info->dma_ch, params->height);
-	set_dma_config(info->dma_ch, dma_config);
-
-	SSYNC();
-	return 0;
-}
-
-static void ppi_update_addr(struct ppi_if *ppi, unsigned long addr)
-{
-	set_dma_start_addr(ppi->info->dma_ch, addr);
-}
-
-struct ppi_if *ppi_create_instance(struct platform_device *pdev,
-			const struct ppi_info *info)
-{
-	struct ppi_if *ppi;
-
-	if (!info || !info->pin_req)
-		return NULL;
-
-#ifndef CONFIG_PINCTRL
-	if (peripheral_request_list(info->pin_req, KBUILD_MODNAME)) {
-		dev_err(&pdev->dev, "request peripheral failed\n");
-		return NULL;
-	}
-#endif
-
-	ppi = kzalloc(sizeof(*ppi), GFP_KERNEL);
-	if (!ppi) {
-		peripheral_free_list(info->pin_req);
-		return NULL;
-	}
-	ppi->ops = &ppi_ops;
-	ppi->info = info;
-	ppi->dev = &pdev->dev;
-
-	pr_info("ppi probe success\n");
-	return ppi;
-}
-EXPORT_SYMBOL(ppi_create_instance);
-
-void ppi_delete_instance(struct ppi_if *ppi)
-{
-	peripheral_free_list(ppi->info->pin_req);
-	kfree(ppi);
-}
-EXPORT_SYMBOL(ppi_delete_instance);
-
-MODULE_DESCRIPTION("Analog Devices PPI driver");
-MODULE_AUTHOR("Scott Jiang <Scott.Jiang.Linux@...il.com>");
-MODULE_LICENSE("GPL v2");
diff --git a/include/media/blackfin/bfin_capture.h b/include/media/blackfin/bfin_capture.h
deleted file mode 100644
index a999a397..0000000
--- a/include/media/blackfin/bfin_capture.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _BFIN_CAPTURE_H_
-#define _BFIN_CAPTURE_H_
-
-#include <linux/i2c.h>
-
-struct v4l2_input;
-struct ppi_info;
-
-struct bcap_route {
-	u32 input;
-	u32 output;
-	u32 ppi_control;
-};
-
-struct bfin_capture_config {
-	/* card name */
-	char *card_name;
-	/* inputs available at the sub device */
-	struct v4l2_input *inputs;
-	/* number of inputs supported */
-	int num_inputs;
-	/* routing information for each input */
-	struct bcap_route *routes;
-	/* i2c bus adapter no */
-	int i2c_adapter_id;
-	/* i2c subdevice board info */
-	struct i2c_board_info board_info;
-	/* ppi board info */
-	const struct ppi_info *ppi_info;
-	/* ppi control */
-	unsigned long ppi_control;
-	/* ppi interrupt mask */
-	u32 int_mask;
-	/* horizontal blanking pixels */
-	int blank_pixels;
-};
-
-#endif
diff --git a/include/media/blackfin/ppi.h b/include/media/blackfin/ppi.h
deleted file mode 100644
index 987e49e..0000000
--- a/include/media/blackfin/ppi.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Analog Devices PPI header file
- *
- * Copyright (c) 2011 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _PPI_H_
-#define _PPI_H_
-
-#include <linux/interrupt.h>
-#include <asm/blackfin.h>
-#include <asm/bfin_ppi.h>
-
-/* EPPI */
-#ifdef EPPI_EN
-#define PORT_EN EPPI_EN
-#define PORT_DIR EPPI_DIR
-#define DMA32 0
-#define PACK_EN PACKEN
-#endif
-
-/* EPPI3 */
-#ifdef EPPI0_CTL2
-#define PORT_EN EPPI_CTL_EN
-#define PORT_DIR EPPI_CTL_DIR
-#define PACK_EN EPPI_CTL_PACKEN
-#define DMA32 0
-#define DLEN_8 EPPI_CTL_DLEN08
-#define DLEN_16 EPPI_CTL_DLEN16
-#endif
-
-struct ppi_if;
-
-struct ppi_params {
-	u32 width;              /* width in pixels */
-	u32 height;             /* height in lines */
-	u32 hdelay;             /* delay after the HSYNC in pixels */
-	u32 vdelay;             /* delay after the VSYNC in lines */
-	u32 line;               /* total pixels per line */
-	u32 frame;              /* total lines per frame */
-	u32 hsync;              /* HSYNC length in pixels */
-	u32 vsync;              /* VSYNC length in lines */
-	int bpp;                /* bits per pixel */
-	int dlen;               /* data length for ppi in bits */
-	u32 ppi_control;        /* ppi configuration */
-	u32 int_mask;           /* interrupt mask */
-};
-
-struct ppi_ops {
-	int (*attach_irq)(struct ppi_if *ppi, irq_handler_t handler);
-	void (*detach_irq)(struct ppi_if *ppi);
-	int (*start)(struct ppi_if *ppi);
-	int (*stop)(struct ppi_if *ppi);
-	int (*set_params)(struct ppi_if *ppi, struct ppi_params *params);
-	void (*update_addr)(struct ppi_if *ppi, unsigned long addr);
-};
-
-enum ppi_type {
-	PPI_TYPE_PPI,
-	PPI_TYPE_EPPI,
-	PPI_TYPE_EPPI3,
-};
-
-struct ppi_info {
-	enum ppi_type type;
-	int dma_ch;
-	int irq_err;
-	void __iomem *base;
-	const unsigned short *pin_req;
-};
-
-struct ppi_if {
-	struct device *dev;
-	unsigned long ppi_control;
-	const struct ppi_ops *ops;
-	const struct ppi_info *info;
-	bool err_int; /* if we need request error interrupt */
-	bool err; /* if ppi has fifo error */
-	void *priv;
-};
-
-struct ppi_if *ppi_create_instance(struct platform_device *pdev,
-			const struct ppi_info *info);
-void ppi_delete_instance(struct ppi_if *ppi);
-#endif
-- 
2.7.4

Powered by blists - more mailing lists