| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1521184106-24475-12-git-send-email-aaron.wu@analog.com>
Date: Fri, 16 Mar 2018 15:08:12 +0800
From: Aaron Wu <aaron.wu@...log.com>
To: <linux-kernel@...r.kernel.org>
CC: <aaron.wu@...log.com>
Subject: [Blackfin removal] [PATCH 14/28] mtd: Remove Blackfin MTD support
Signed-off-by: Aaron Wu <aaron.wu@...log.com>
Remove Blackfin MTD support
---
drivers/mtd/maps/Kconfig | 10 -
drivers/mtd/maps/Makefile | 1 -
drivers/mtd/maps/bfin-async-flash.c | 196 --------
drivers/mtd/nand/Kconfig | 32 --
drivers/mtd/nand/Makefile | 1 -
drivers/mtd/nand/bf5xx_nand.c | 862 ------------------------------------
6 files changed, 1102 deletions(-)
delete mode 100644 drivers/mtd/maps/bfin-async-flash.c
delete mode 100644 drivers/mtd/nand/bf5xx_nand.c
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 542fdf8..bdc1283 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -334,16 +334,6 @@ config MTD_PCMCIA_ANONYMOUS
If unsure, say N.
-config MTD_BFIN_ASYNC
- tristate "Blackfin BF533-STAMP Flash Chip Support"
- depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS
- default y
- help
- Map driver which allows for simultaneous utilization of
- ethernet and CFI parallel flash.
-
- If compiled as a module, it will be called bfin-async-flash.
-
config MTD_GPIO_ADDR
tristate "GPIO-assisted Flash Chip Support"
depends on GPIOLIB || COMPILE_TEST
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index b849aaf..51acf1f 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o
obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o
obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o
-obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
obj-$(CONFIG_MTD_VMU) += vmu-flash.o
obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o
diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c
deleted file mode 100644
index 41730fe..0000000
--- a/drivers/mtd/maps/bfin-async-flash.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * drivers/mtd/maps/bfin-async-flash.c
- *
- * Handle the case where flash memory and ethernet mac/phy are
- * mapped onto the same async bank. The BF533-STAMP does this
- * for example. All board-specific configuration goes in your
- * board resources file.
- *
- * Copyright 2000 Nicolas Pitre <nico@...xnic.net>
- * Copyright 2005-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-
-#include <asm/blackfin.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <asm/unaligned.h>
-
-#define pr_devinit(fmt, args...) \
- ({ static const char __fmt[] = fmt; printk(__fmt, ## args); })
-
-#define DRIVER_NAME "bfin-async-flash"
-
-struct async_state {
- struct mtd_info *mtd;
- struct map_info map;
- int enet_flash_pin;
- uint32_t flash_ambctl0, flash_ambctl1;
- uint32_t save_ambctl0, save_ambctl1;
- unsigned long irq_flags;
-};
-
-static void switch_to_flash(struct async_state *state)
-{
- local_irq_save(state->irq_flags);
-
- gpio_set_value(state->enet_flash_pin, 0);
-
- state->save_ambctl0 = bfin_read_EBIU_AMBCTL0();
- state->save_ambctl1 = bfin_read_EBIU_AMBCTL1();
- bfin_write_EBIU_AMBCTL0(state->flash_ambctl0);
- bfin_write_EBIU_AMBCTL1(state->flash_ambctl1);
- SSYNC();
-}
-
-static void switch_back(struct async_state *state)
-{
- bfin_write_EBIU_AMBCTL0(state->save_ambctl0);
- bfin_write_EBIU_AMBCTL1(state->save_ambctl1);
- SSYNC();
-
- gpio_set_value(state->enet_flash_pin, 1);
-
- local_irq_restore(state->irq_flags);
-}
-
-static map_word bfin_flash_read(struct map_info *map, unsigned long ofs)
-{
- struct async_state *state = (struct async_state *)map->map_priv_1;
- uint16_t word;
- map_word test;
-
- switch_to_flash(state);
-
- word = readw(map->virt + ofs);
-
- switch_back(state);
-
- test.x[0] = word;
- return test;
-}
-
-static void bfin_flash_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
- struct async_state *state = (struct async_state *)map->map_priv_1;
-
- switch_to_flash(state);
-
- memcpy(to, map->virt + from, len);
-
- switch_back(state);
-}
-
-static void bfin_flash_write(struct map_info *map, map_word d1, unsigned long ofs)
-{
- struct async_state *state = (struct async_state *)map->map_priv_1;
- uint16_t d;
-
- d = d1.x[0];
-
- switch_to_flash(state);
-
- writew(d, map->virt + ofs);
- SSYNC();
-
- switch_back(state);
-}
-
-static void bfin_flash_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{
- struct async_state *state = (struct async_state *)map->map_priv_1;
-
- switch_to_flash(state);
-
- memcpy(map->virt + to, from, len);
- SSYNC();
-
- switch_back(state);
-}
-
-static const char * const part_probe_types[] = {
- "cmdlinepart", "RedBoot", NULL };
-
-static int bfin_flash_probe(struct platform_device *pdev)
-{
- struct physmap_flash_data *pdata = dev_get_platdata(&pdev->dev);
- struct resource *memory = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- struct resource *flash_ambctl = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- struct async_state *state;
-
- state = kzalloc(sizeof(*state), GFP_KERNEL);
- if (!state)
- return -ENOMEM;
-
- state->map.name = DRIVER_NAME;
- state->map.read = bfin_flash_read;
- state->map.copy_from = bfin_flash_copy_from;
- state->map.write = bfin_flash_write;
- state->map.copy_to = bfin_flash_copy_to;
- state->map.bankwidth = pdata->width;
- state->map.size = resource_size(memory);
- state->map.virt = (void __iomem *)memory->start;
- state->map.phys = memory->start;
- state->map.map_priv_1 = (unsigned long)state;
- state->enet_flash_pin = platform_get_irq(pdev, 0);
- state->flash_ambctl0 = flash_ambctl->start;
- state->flash_ambctl1 = flash_ambctl->end;
-
- if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) {
- pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin);
- kfree(state);
- return -EBUSY;
- }
- gpio_direction_output(state->enet_flash_pin, 1);
-
- pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8);
- state->mtd = do_map_probe(memory->name, &state->map);
- if (!state->mtd) {
- gpio_free(state->enet_flash_pin);
- kfree(state);
- return -ENXIO;
- }
-
- mtd_device_parse_register(state->mtd, part_probe_types, NULL,
- pdata->parts, pdata->nr_parts);
-
- platform_set_drvdata(pdev, state);
-
- return 0;
-}
-
-static int bfin_flash_remove(struct platform_device *pdev)
-{
- struct async_state *state = platform_get_drvdata(pdev);
- gpio_free(state->enet_flash_pin);
- mtd_device_unregister(state->mtd);
- map_destroy(state->mtd);
- kfree(state);
- return 0;
-}
-
-static struct platform_driver bfin_flash_driver = {
- .probe = bfin_flash_probe,
- .remove = bfin_flash_remove,
- .driver = {
- .name = DRIVER_NAME,
- },
-};
-
-module_platform_driver(bfin_flash_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MTD map driver for Blackfins with flash/ethernet on same async bank");
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 736ac88..c0bee1f0 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -116,38 +116,6 @@ config MTD_NAND_AU1550
This enables the driver for the NAND flash controller on the
AMD/Alchemy 1550 SOC.
-config MTD_NAND_BF5XX
- tristate "Blackfin on-chip NAND Flash Controller driver"
- depends on BF54x || BF52x
- help
- This enables the Blackfin on-chip NAND flash controller
-
- No board specific support is done by this driver, each board
- must advertise a platform_device for the driver to attach.
-
- This driver can also be built as a module. If so, the module
- will be called bf5xx-nand.
-
-config MTD_NAND_BF5XX_HWECC
- bool "BF5XX NAND Hardware ECC"
- default y
- depends on MTD_NAND_BF5XX
- help
- Enable the use of the BF5XX's internal ECC generator when
- using NAND.
-
-config MTD_NAND_BF5XX_BOOTROM_ECC
- bool "Use Blackfin BootROM ECC Layout"
- default n
- depends on MTD_NAND_BF5XX_HWECC
- help
- If you wish to modify NAND pages and allow the Blackfin on-chip
- BootROM to boot from them, say Y here. This is only necessary
- if you are booting U-Boot out of NAND and you wish to update
- U-Boot from Linux' userspace. Otherwise, you should say N here.
-
- If unsure, say N.
-
config MTD_NAND_S3C2410
tristate "NAND Flash support for Samsung S3C SoCs"
depends on ARCH_S3C24XX || ARCH_S3C64XX
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 921634b..08fc018 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o
obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o
obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
-obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
obj-$(CONFIG_MTD_NAND_TANGO) += tango_nand.o
obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
deleted file mode 100644
index 87bbd17..0000000
--- a/drivers/mtd/nand/bf5xx_nand.c
+++ /dev/null
@@ -1,862 +0,0 @@
-/* linux/drivers/mtd/nand/bf5xx_nand.c
- *
- * Copyright 2006-2008 Analog Devices Inc.
- * http://blackfin.uclinux.org/
- * Bryan Wu <bryan.wu@...log.com>
- *
- * Blackfin BF5xx on-chip NAND flash controller driver
- *
- * Derived from drivers/mtd/nand/s3c2410.c
- * Copyright (c) 2007 Ben Dooks <ben@...tec.co.uk>
- *
- * Derived from drivers/mtd/nand/cafe.c
- * Copyright © 2006 Red Hat, Inc.
- * Copyright © 2006 David Woodhouse <dwmw2@...radead.org>
- *
- * Changelog:
- * 12-Jun-2007 Bryan Wu: Initial version
- * 18-Jul-2007 Bryan Wu:
- * - ECC_HW and ECC_SW supported
- * - DMA supported in ECC_HW
- * - YAFFS tested as rootfs in both ECC_HW and ECC_SW
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/bitops.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/blackfin.h>
-#include <asm/dma.h>
-#include <asm/cacheflush.h>
-#include <asm/nand.h>
-#include <asm/portmux.h>
-
-#define DRV_NAME "bf5xx-nand"
-#define DRV_VERSION "1.2"
-#define DRV_AUTHOR "Bryan Wu <bryan.wu@...log.com>"
-#define DRV_DESC "BF5xx on-chip NAND FLash Controller Driver"
-
-/* NFC_STAT Masks */
-#define NBUSY 0x01 /* Not Busy */
-#define WB_FULL 0x02 /* Write Buffer Full */
-#define PG_WR_STAT 0x04 /* Page Write Pending */
-#define PG_RD_STAT 0x08 /* Page Read Pending */
-#define WB_EMPTY 0x10 /* Write Buffer Empty */
-
-/* NFC_IRQSTAT Masks */
-#define NBUSYIRQ 0x01 /* Not Busy IRQ */
-#define WB_OVF 0x02 /* Write Buffer Overflow */
-#define WB_EDGE 0x04 /* Write Buffer Edge Detect */
-#define RD_RDY 0x08 /* Read Data Ready */
-#define WR_DONE 0x10 /* Page Write Done */
-
-/* NFC_RST Masks */
-#define ECC_RST 0x01 /* ECC (and NFC counters) Reset */
-
-/* NFC_PGCTL Masks */
-#define PG_RD_START 0x01 /* Page Read Start */
-#define PG_WR_START 0x02 /* Page Write Start */
-
-#ifdef CONFIG_MTD_NAND_BF5XX_HWECC
-static int hardware_ecc = 1;
-#else
-static int hardware_ecc;
-#endif
-
-static const unsigned short bfin_nfc_pin_req[] =
- {P_NAND_CE,
- P_NAND_RB,
- P_NAND_D0,
- P_NAND_D1,
- P_NAND_D2,
- P_NAND_D3,
- P_NAND_D4,
- P_NAND_D5,
- P_NAND_D6,
- P_NAND_D7,
- P_NAND_WE,
- P_NAND_RE,
- P_NAND_CLE,
- P_NAND_ALE,
- 0};
-
-#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
-static int bootrom_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- if (section > 7)
- return -ERANGE;
-
- oobregion->offset = section * 8;
- oobregion->length = 3;
-
- return 0;
-}
-
-static int bootrom_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- if (section > 7)
- return -ERANGE;
-
- oobregion->offset = (section * 8) + 3;
- oobregion->length = 5;
-
- return 0;
-}
-
-static const struct mtd_ooblayout_ops bootrom_ooblayout_ops = {
- .ecc = bootrom_ooblayout_ecc,
- .free = bootrom_ooblayout_free,
-};
-#endif
-
-/*
- * Data structures for bf5xx nand flash controller driver
- */
-
-/* bf5xx nand info */
-struct bf5xx_nand_info {
- /* mtd info */
- struct nand_hw_control controller;
- struct nand_chip chip;
-
- /* platform info */
- struct bf5xx_nand_platform *platform;
-
- /* device info */
- struct device *device;
-
- /* DMA stuff */
- struct completion dma_completion;
-};
-
-/*
- * Conversion functions
- */
-static struct bf5xx_nand_info *mtd_to_nand_info(struct mtd_info *mtd)
-{
- return container_of(mtd_to_nand(mtd), struct bf5xx_nand_info,
- chip);
-}
-
-static struct bf5xx_nand_info *to_nand_info(struct platform_device *pdev)
-{
- return platform_get_drvdata(pdev);
-}
-
-static struct bf5xx_nand_platform *to_nand_plat(struct platform_device *pdev)
-{
- return dev_get_platdata(&pdev->dev);
-}
-
-/*
- * struct nand_chip interface function pointers
- */
-
-/*
- * bf5xx_nand_hwcontrol
- *
- * Issue command and address cycles to the chip
- */
-static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- if (cmd == NAND_CMD_NONE)
- return;
-
- while (bfin_read_NFC_STAT() & WB_FULL)
- cpu_relax();
-
- if (ctrl & NAND_CLE)
- bfin_write_NFC_CMD(cmd);
- else if (ctrl & NAND_ALE)
- bfin_write_NFC_ADDR(cmd);
- SSYNC();
-}
-
-/*
- * bf5xx_nand_devready()
- *
- * returns 0 if the nand is busy, 1 if it is ready
- */
-static int bf5xx_nand_devready(struct mtd_info *mtd)
-{
- unsigned short val = bfin_read_NFC_STAT();
-
- if ((val & NBUSY) == NBUSY)
- return 1;
- else
- return 0;
-}
-
-/*
- * ECC functions
- * These allow the bf5xx to use the controller's ECC
- * generator block to ECC the data as it passes through
- */
-
-/*
- * ECC error correction function
- */
-static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat,
- u_char *read_ecc, u_char *calc_ecc)
-{
- struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- u32 syndrome[5];
- u32 calced, stored;
- int i;
- unsigned short failing_bit, failing_byte;
- u_char data;
-
- calced = calc_ecc[0] | (calc_ecc[1] << 8) | (calc_ecc[2] << 16);
- stored = read_ecc[0] | (read_ecc[1] << 8) | (read_ecc[2] << 16);
-
- syndrome[0] = (calced ^ stored);
-
- /*
- * syndrome 0: all zero
- * No error in data
- * No action
- */
- if (!syndrome[0] || !calced || !stored)
- return 0;
-
- /*
- * sysdrome 0: only one bit is one
- * ECC data was incorrect
- * No action
- */
- if (hweight32(syndrome[0]) == 1) {
- dev_err(info->device, "ECC data was incorrect!\n");
- return -EBADMSG;
- }
-
- syndrome[1] = (calced & 0x7FF) ^ (stored & 0x7FF);
- syndrome[2] = (calced & 0x7FF) ^ ((calced >> 11) & 0x7FF);
- syndrome[3] = (stored & 0x7FF) ^ ((stored >> 11) & 0x7FF);
- syndrome[4] = syndrome[2] ^ syndrome[3];
-
- for (i = 0; i < 5; i++)
- dev_info(info->device, "syndrome[%d] 0x%08x\n", i, syndrome[i]);
-
- dev_info(info->device,
- "calced[0x%08x], stored[0x%08x]\n",
- calced, stored);
-
- /*
- * sysdrome 0: exactly 11 bits are one, each parity
- * and parity' pair is 1 & 0 or 0 & 1.
- * 1-bit correctable error
- * Correct the error
- */
- if (hweight32(syndrome[0]) == 11 && syndrome[4] == 0x7FF) {
- dev_info(info->device,
- "1-bit correctable error, correct it.\n");
- dev_info(info->device,
- "syndrome[1] 0x%08x\n", syndrome[1]);
-
- failing_bit = syndrome[1] & 0x7;
- failing_byte = syndrome[1] >> 0x3;
- data = *(dat + failing_byte);
- data = data ^ (0x1 << failing_bit);
- *(dat + failing_byte) = data;
-
- return 1;
- }
-
- /*
- * sysdrome 0: random data
- * More than 1-bit error, non-correctable error
- * Discard data, mark bad block
- */
- dev_err(info->device,
- "More than 1-bit error, non-correctable error.\n");
- dev_err(info->device,
- "Please discard data, mark bad block\n");
-
- return -EBADMSG;
-}
-
-static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
- u_char *read_ecc, u_char *calc_ecc)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- int ret, bitflips = 0;
-
- ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
- if (ret < 0)
- return ret;
-
- bitflips = ret;
-
- /* If ecc size is 512, correct second 256 bytes */
- if (chip->ecc.size == 512) {
- dat += 256;
- read_ecc += 3;
- calc_ecc += 3;
- ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
- if (ret < 0)
- return ret;
-
- bitflips += ret;
- }
-
- return bitflips;
-}
-
-static void bf5xx_nand_enable_hwecc(struct mtd_info *mtd, int mode)
-{
- return;
-}
-
-static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
- const u_char *dat, u_char *ecc_code)
-{
- struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct nand_chip *chip = mtd_to_nand(mtd);
- u16 ecc0, ecc1;
- u32 code[2];
- u8 *p;
-
- /* first 3 bytes ECC code for 256 page size */
- ecc0 = bfin_read_NFC_ECC0();
- ecc1 = bfin_read_NFC_ECC1();
-
- code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
-
- dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
-
- p = (u8 *) code;
- memcpy(ecc_code, p, 3);
-
- /* second 3 bytes ECC code for 512 ecc size */
- if (chip->ecc.size == 512) {
- ecc0 = bfin_read_NFC_ECC2();
- ecc1 = bfin_read_NFC_ECC3();
- code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
-
- /* second 3 bytes in ecc_code for second 256
- * bytes of 512 page size
- */
- p = (u8 *) (code + 1);
- memcpy((ecc_code + 3), p, 3);
- dev_dbg(info->device, "returning ecc 0x%08x\n", code[1]);
- }
-
- return 0;
-}
-
-/*
- * PIO mode for buffer writing and reading
- */
-static void bf5xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-{
- int i;
- unsigned short val;
-
- /*
- * Data reads are requested by first writing to NFC_DATA_RD
- * and then reading back from NFC_READ.
- */
- for (i = 0; i < len; i++) {
- while (bfin_read_NFC_STAT() & WB_FULL)
- cpu_relax();
-
- /* Contents do not matter */
- bfin_write_NFC_DATA_RD(0x0000);
- SSYNC();
-
- while ((bfin_read_NFC_IRQSTAT() & RD_RDY) != RD_RDY)
- cpu_relax();
-
- buf[i] = bfin_read_NFC_READ();
-
- val = bfin_read_NFC_IRQSTAT();
- val |= RD_RDY;
- bfin_write_NFC_IRQSTAT(val);
- SSYNC();
- }
-}
-
-static uint8_t bf5xx_nand_read_byte(struct mtd_info *mtd)
-{
- uint8_t val;
-
- bf5xx_nand_read_buf(mtd, &val, 1);
-
- return val;
-}
-
-static void bf5xx_nand_write_buf(struct mtd_info *mtd,
- const uint8_t *buf, int len)
-{
- int i;
-
- for (i = 0; i < len; i++) {
- while (bfin_read_NFC_STAT() & WB_FULL)
- cpu_relax();
-
- bfin_write_NFC_DATA_WR(buf[i]);
- SSYNC();
- }
-}
-
-static void bf5xx_nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
-{
- int i;
- u16 *p = (u16 *) buf;
- len >>= 1;
-
- /*
- * Data reads are requested by first writing to NFC_DATA_RD
- * and then reading back from NFC_READ.
- */
- bfin_write_NFC_DATA_RD(0x5555);
-
- SSYNC();
-
- for (i = 0; i < len; i++)
- p[i] = bfin_read_NFC_READ();
-}
-
-static void bf5xx_nand_write_buf16(struct mtd_info *mtd,
- const uint8_t *buf, int len)
-{
- int i;
- u16 *p = (u16 *) buf;
- len >>= 1;
-
- for (i = 0; i < len; i++)
- bfin_write_NFC_DATA_WR(p[i]);
-
- SSYNC();
-}
-
-/*
- * DMA functions for buffer writing and reading
- */
-static irqreturn_t bf5xx_nand_dma_irq(int irq, void *dev_id)
-{
- struct bf5xx_nand_info *info = dev_id;
-
- clear_dma_irqstat(CH_NFC);
- disable_dma(CH_NFC);
- complete(&info->dma_completion);
-
- return IRQ_HANDLED;
-}
-
-static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
- uint8_t *buf, int is_read)
-{
- struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct nand_chip *chip = mtd_to_nand(mtd);
- unsigned short val;
-
- dev_dbg(info->device, " mtd->%p, buf->%p, is_read %d\n",
- mtd, buf, is_read);
-
- /*
- * Before starting a dma transfer, be sure to invalidate/flush
- * the cache over the address range of your DMA buffer to
- * prevent cache coherency problems. Otherwise very subtle bugs
- * can be introduced to your driver.
- */
- if (is_read)
- invalidate_dcache_range((unsigned int)buf,
- (unsigned int)(buf + chip->ecc.size));
- else
- flush_dcache_range((unsigned int)buf,
- (unsigned int)(buf + chip->ecc.size));
-
- /*
- * This register must be written before each page is
- * transferred to generate the correct ECC register
- * values.
- */
- bfin_write_NFC_RST(ECC_RST);
- SSYNC();
- while (bfin_read_NFC_RST() & ECC_RST)
- cpu_relax();
-
- disable_dma(CH_NFC);
- clear_dma_irqstat(CH_NFC);
-
- /* setup DMA register with Blackfin DMA API */
- set_dma_config(CH_NFC, 0x0);
- set_dma_start_addr(CH_NFC, (unsigned long) buf);
-
- /* The DMAs have different size on BF52x and BF54x */
-#ifdef CONFIG_BF52x
- set_dma_x_count(CH_NFC, (chip->ecc.size >> 1));
- set_dma_x_modify(CH_NFC, 2);
- val = DI_EN | WDSIZE_16;
-#endif
-
-#ifdef CONFIG_BF54x
- set_dma_x_count(CH_NFC, (chip->ecc.size >> 2));
- set_dma_x_modify(CH_NFC, 4);
- val = DI_EN | WDSIZE_32;
-#endif
- /* setup write or read operation */
- if (is_read)
- val |= WNR;
- set_dma_config(CH_NFC, val);
- enable_dma(CH_NFC);
-
- /* Start PAGE read/write operation */
- if (is_read)
- bfin_write_NFC_PGCTL(PG_RD_START);
- else
- bfin_write_NFC_PGCTL(PG_WR_START);
- wait_for_completion(&info->dma_completion);
-}
-
-static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd,
- uint8_t *buf, int len)
-{
- struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len);
-
- if (len == chip->ecc.size)
- bf5xx_nand_dma_rw(mtd, buf, 1);
- else
- bf5xx_nand_read_buf(mtd, buf, len);
-}
-
-static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
- const uint8_t *buf, int len)
-{
- struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len);
-
- if (len == chip->ecc.size)
- bf5xx_nand_dma_rw(mtd, (uint8_t *)buf, 0);
- else
- bf5xx_nand_write_buf(mtd, buf, len);
-}
-
-static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf, int oob_required, int page)
-{
- nand_read_page_op(chip, page, 0, NULL, 0);
-
- bf5xx_nand_read_buf(mtd, buf, mtd->writesize);
- bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize);
-
- return 0;
-}
-
-static int bf5xx_nand_write_page_raw(struct mtd_info *mtd,
- struct nand_chip *chip, const uint8_t *buf, int oob_required,
- int page)
-{
- nand_prog_page_begin_op(chip, page, 0, buf, mtd->writesize);
- bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
-
- return nand_prog_page_end_op(chip);
-}
-
-/*
- * System initialization functions
- */
-static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
-{
- int ret;
-
- /* Do not use dma */
- if (!hardware_ecc)
- return 0;
-
- init_completion(&info->dma_completion);
-
- /* Request NFC DMA channel */
- ret = request_dma(CH_NFC, "BF5XX NFC driver");
- if (ret < 0) {
- dev_err(info->device, " unable to get DMA channel\n");
- return ret;
- }
-
-#ifdef CONFIG_BF54x
- /* Setup DMAC1 channel mux for NFC which shared with SDH */
- bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() & ~1);
- SSYNC();
-#endif
-
- set_dma_callback(CH_NFC, bf5xx_nand_dma_irq, info);
-
- /* Turn off the DMA channel first */
- disable_dma(CH_NFC);
- return 0;
-}
-
-static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info)
-{
- /* Free NFC DMA channel */
- if (hardware_ecc)
- free_dma(CH_NFC);
-}
-
-/*
- * BF5XX NFC hardware initialization
- * - pin mux setup
- * - clear interrupt status
- */
-static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info)
-{
- int err = 0;
- unsigned short val;
- struct bf5xx_nand_platform *plat = info->platform;
-
- /* setup NFC_CTL register */
- dev_info(info->device,
- "data_width=%d, wr_dly=%d, rd_dly=%d\n",
- (plat->data_width ? 16 : 8),
- plat->wr_dly, plat->rd_dly);
-
- val = (1 << NFC_PG_SIZE_OFFSET) |
- (plat->data_width << NFC_NWIDTH_OFFSET) |
- (plat->rd_dly << NFC_RDDLY_OFFSET) |
- (plat->wr_dly << NFC_WRDLY_OFFSET);
- dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val);
-
- bfin_write_NFC_CTL(val);
- SSYNC();
-
- /* clear interrupt status */
- bfin_write_NFC_IRQMASK(0x0);
- SSYNC();
- val = bfin_read_NFC_IRQSTAT();
- bfin_write_NFC_IRQSTAT(val);
- SSYNC();
-
- /* DMA initialization */
- if (bf5xx_nand_dma_init(info))
- err = -ENXIO;
-
- return err;
-}
-
-/*
- * Device management interface
- */
-static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
-{
- struct mtd_info *mtd = nand_to_mtd(&info->chip);
- struct mtd_partition *parts = info->platform->partitions;
- int nr = info->platform->nr_partitions;
-
- return mtd_device_register(mtd, parts, nr);
-}
-
-static int bf5xx_nand_remove(struct platform_device *pdev)
-{
- struct bf5xx_nand_info *info = to_nand_info(pdev);
-
- /* first thing we need to do is release all our mtds
- * and their partitions, then go through freeing the
- * resources used
- */
- nand_release(nand_to_mtd(&info->chip));
-
- peripheral_free_list(bfin_nfc_pin_req);
- bf5xx_nand_dma_remove(info);
-
- return 0;
-}
-
-static int bf5xx_nand_scan(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- int ret;
-
- ret = nand_scan_ident(mtd, 1, NULL);
- if (ret)
- return ret;
-
- if (hardware_ecc) {
- /*
- * for nand with page size > 512B, think it as several sections with 512B
- */
- if (likely(mtd->writesize >= 512)) {
- chip->ecc.size = 512;
- chip->ecc.bytes = 6;
- chip->ecc.strength = 2;
- } else {
- chip->ecc.size = 256;
- chip->ecc.bytes = 3;
- chip->ecc.strength = 1;
- bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET));
- SSYNC();
- }
- }
-
- return nand_scan_tail(mtd);
-}
-
-/*
- * bf5xx_nand_probe
- *
- * called by device layer when it finds a device matching
- * one our driver can handled. This code checks to see if
- * it can allocate all necessary resources then calls the
- * nand layer to look for devices
- */
-static int bf5xx_nand_probe(struct platform_device *pdev)
-{
- struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
- struct bf5xx_nand_info *info = NULL;
- struct nand_chip *chip = NULL;
- struct mtd_info *mtd = NULL;
- int err = 0;
-
- dev_dbg(&pdev->dev, "(%p)\n", pdev);
-
- if (!plat) {
- dev_err(&pdev->dev, "no platform specific information\n");
- return -EINVAL;
- }
-
- if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
- dev_err(&pdev->dev, "requesting Peripherals failed\n");
- return -EFAULT;
- }
-
- info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
- if (info == NULL) {
- err = -ENOMEM;
- goto out_err;
- }
-
- platform_set_drvdata(pdev, info);
-
- nand_hw_control_init(&info->controller);
-
- info->device = &pdev->dev;
- info->platform = plat;
-
- /* initialise chip data struct */
- chip = &info->chip;
- mtd = nand_to_mtd(&info->chip);
-
- if (plat->data_width)
- chip->options |= NAND_BUSWIDTH_16;
-
- chip->options |= NAND_CACHEPRG | NAND_SKIP_BBTSCAN;
-
- chip->read_buf = (plat->data_width) ?
- bf5xx_nand_read_buf16 : bf5xx_nand_read_buf;
- chip->write_buf = (plat->data_width) ?
- bf5xx_nand_write_buf16 : bf5xx_nand_write_buf;
-
- chip->read_byte = bf5xx_nand_read_byte;
-
- chip->cmd_ctrl = bf5xx_nand_hwcontrol;
- chip->dev_ready = bf5xx_nand_devready;
-
- nand_set_controller_data(chip, mtd);
- chip->controller = &info->controller;
-
- chip->IO_ADDR_R = (void __iomem *) NFC_READ;
- chip->IO_ADDR_W = (void __iomem *) NFC_DATA_WR;
-
- chip->chip_delay = 0;
-
- /* initialise mtd info data struct */
- mtd->dev.parent = &pdev->dev;
-
- /* initialise the hardware */
- err = bf5xx_nand_hw_init(info);
- if (err)
- goto out_err;
-
- /* setup hardware ECC data struct */
- if (hardware_ecc) {
-#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
- mtd_set_ooblayout(mtd, &bootrom_ooblayout_ops);
-#endif
- chip->read_buf = bf5xx_nand_dma_read_buf;
- chip->write_buf = bf5xx_nand_dma_write_buf;
- chip->ecc.calculate = bf5xx_nand_calculate_ecc;
- chip->ecc.correct = bf5xx_nand_correct_data;
- chip->ecc.mode = NAND_ECC_HW;
- chip->ecc.hwctl = bf5xx_nand_enable_hwecc;
- chip->ecc.read_page_raw = bf5xx_nand_read_page_raw;
- chip->ecc.write_page_raw = bf5xx_nand_write_page_raw;
- } else {
- chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
- }
-
- /* scan hardware nand chip and setup mtd info data struct */
- if (bf5xx_nand_scan(mtd)) {
- err = -ENXIO;
- goto out_err_nand_scan;
- }
-
-#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
- chip->badblockpos = 63;
-#endif
-
- /* add NAND partition */
- bf5xx_nand_add_partition(info);
-
- dev_dbg(&pdev->dev, "initialised ok\n");
- return 0;
-
-out_err_nand_scan:
- bf5xx_nand_dma_remove(info);
-out_err:
- peripheral_free_list(bfin_nfc_pin_req);
-
- return err;
-}
-
-/* driver device registration */
-static struct platform_driver bf5xx_nand_driver = {
- .probe = bf5xx_nand_probe,
- .remove = bf5xx_nand_remove,
- .driver = {
- .name = DRV_NAME,
- },
-};
-
-module_platform_driver(bf5xx_nand_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR(DRV_AUTHOR);
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_ALIAS("platform:" DRV_NAME);
--
2.7.4
Powered by blists - more mailing lists