Message-ID: <1521184106-24475-7-git-send-email-aaron.wu@analog.com>
Date:   Fri, 16 Mar 2018 15:08:07 +0800
From:   Aaron Wu <aaron.wu@...log.com>
To:     <linux-kernel@...r.kernel.org>
CC:     <aaron.wu@...log.com>
Subject: [Blackfin removal] [PATCH 09/28] input: Remove Blackfin input support

Signed-off-by: Aaron Wu <aaron.wu@...log.com>

Remove Blackfin input support
---
 drivers/input/keyboard/Kconfig            |   9 -
 drivers/input/keyboard/Makefile           |   1 -
 drivers/input/keyboard/bf54x-keys.c       | 396 ------------------------------
 drivers/input/misc/Kconfig                |   9 -
 drivers/input/misc/Makefile               |   1 -
 drivers/input/misc/bfin_rotary.c          | 294 ----------------------
 include/linux/platform_data/bfin_rotary.h | 117 ---------
 7 files changed, 827 deletions(-)
 delete mode 100644 drivers/input/keyboard/bf54x-keys.c
 delete mode 100644 drivers/input/misc/bfin_rotary.c
 delete mode 100644 include/linux/platform_data/bfin_rotary.h

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 4c4ab1c..2b469cc 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -157,15 +157,6 @@ config KEYBOARD_QT2160
 	  This driver can also be built as a module. If so, the module
 	  will be called qt2160.
 
-config KEYBOARD_BFIN
-	tristate "Blackfin BF54x keypad support"
-	depends on (BF54x && !BF544)
-	help
-	  Say Y here if you want to use the BF54x keypad.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bf54x-keys.
-
 config KEYBOARD_CLPS711X
 	tristate "CLPS711X Keypad support"
 	depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST)
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 526e682..8fab920 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -13,7 +13,6 @@ obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
 obj-$(CONFIG_KEYBOARD_BCM)		+= bcm-keypad.o
-obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
 obj-$(CONFIG_KEYBOARD_CROS_EC)		+= cros_ec_keyb.o
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
deleted file mode 100644
index 8a07a42..0000000
--- a/drivers/input/keyboard/bf54x-keys.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * File:         drivers/input/keyboard/bf54x-keys.c
- * Based on:
- * Author:       Michael Hennerich <hennerich@...ckfin.uclinux.org>
- *
- * Created:
- * Description:  keypad driver for Analog Devices Blackfin BF54x Processors
- *
- *
- * Modified:
- *               Copyright 2007-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/module.h>
-
-#include <linux/fs.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/sched.h>
-#include <linux/pm.h>
-#include <linux/sysctl.h>
-#include <linux/proc_fs.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-
-#include <asm/portmux.h>
-#include <mach/bf54x_keys.h>
-
-#define DRV_NAME	"bf54x-keys"
-#define TIME_SCALE	100	/* 100 ns */
-#define	MAX_MULT	(0xFF * TIME_SCALE)
-#define MAX_RC		8	/* Max Row/Col */
-
-static const u16 per_rows[] = {
-	P_KEY_ROW7,
-	P_KEY_ROW6,
-	P_KEY_ROW5,
-	P_KEY_ROW4,
-	P_KEY_ROW3,
-	P_KEY_ROW2,
-	P_KEY_ROW1,
-	P_KEY_ROW0,
-	0
-};
-
-static const u16 per_cols[] = {
-	P_KEY_COL7,
-	P_KEY_COL6,
-	P_KEY_COL5,
-	P_KEY_COL4,
-	P_KEY_COL3,
-	P_KEY_COL2,
-	P_KEY_COL1,
-	P_KEY_COL0,
-	0
-};
-
-struct bf54x_kpad {
-	struct input_dev *input;
-	int irq;
-	unsigned short lastkey;
-	unsigned short *keycode;
-	struct timer_list timer;
-	unsigned int keyup_test_jiffies;
-	unsigned short kpad_msel;
-	unsigned short kpad_prescale;
-	unsigned short kpad_ctl;
-};
-
-static inline int bfin_kpad_find_key(struct bf54x_kpad *bf54x_kpad,
-			struct input_dev *input, u16 keyident)
-{
-	u16 i;
-
-	for (i = 0; i < input->keycodemax; i++)
-		if (bf54x_kpad->keycode[i + input->keycodemax] == keyident)
-			return bf54x_kpad->keycode[i];
-	return -1;
-}
-
-static inline void bfin_keycodecpy(unsigned short *keycode,
-			const unsigned int *pdata_kc,
-			unsigned short keymapsize)
-{
-	unsigned int i;
-
-	for (i = 0; i < keymapsize; i++) {
-		keycode[i] = pdata_kc[i] & 0xffff;
-		keycode[i + keymapsize] = pdata_kc[i] >> 16;
-	}
-}
-
-static inline u16 bfin_kpad_get_prescale(u32 timescale)
-{
-	u32 sclk = get_sclk();
-
-	return ((((sclk / 1000) * timescale) / 1024) - 1);
-}
-
-static inline u16 bfin_kpad_get_keypressed(struct bf54x_kpad *bf54x_kpad)
-{
-	return (bfin_read_KPAD_STAT() & KPAD_PRESSED);
-}
-
-static inline void bfin_kpad_clear_irq(void)
-{
-	bfin_write_KPAD_STAT(0xFFFF);
-	bfin_write_KPAD_ROWCOL(0xFFFF);
-}
-
-static void bfin_kpad_timer(struct timer_list *t)
-{
-	struct bf54x_kpad *bf54x_kpad = from_timer(bf54x_kpad, t, timer);
-
-	if (bfin_kpad_get_keypressed(bf54x_kpad)) {
-		/* Try again later */
-		mod_timer(&bf54x_kpad->timer,
-			  jiffies + bf54x_kpad->keyup_test_jiffies);
-		return;
-	}
-
-	input_report_key(bf54x_kpad->input, bf54x_kpad->lastkey, 0);
-	input_sync(bf54x_kpad->input);
-
-	/* Clear IRQ Status */
-
-	bfin_kpad_clear_irq();
-	enable_irq(bf54x_kpad->irq);
-}
-
-static irqreturn_t bfin_kpad_isr(int irq, void *dev_id)
-{
-	struct platform_device *pdev = dev_id;
-	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
-	struct input_dev *input = bf54x_kpad->input;
-	int key;
-	u16 rowcol = bfin_read_KPAD_ROWCOL();
-
-	key = bfin_kpad_find_key(bf54x_kpad, input, rowcol);
-
-	input_report_key(input, key, 1);
-	input_sync(input);
-
-	if (bfin_kpad_get_keypressed(bf54x_kpad)) {
-		disable_irq_nosync(bf54x_kpad->irq);
-		bf54x_kpad->lastkey = key;
-		mod_timer(&bf54x_kpad->timer,
-			  jiffies + bf54x_kpad->keyup_test_jiffies);
-	} else {
-		input_report_key(input, key, 0);
-		input_sync(input);
-
-		bfin_kpad_clear_irq();
-	}
-
-	return IRQ_HANDLED;
-}
-
-static int bfin_kpad_probe(struct platform_device *pdev)
-{
-	struct bf54x_kpad *bf54x_kpad;
-	struct bfin_kpad_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct input_dev *input;
-	int i, error;
-
-	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
-		dev_err(&pdev->dev, "no rows, cols or keymap from pdata\n");
-		return -EINVAL;
-	}
-
-	if (!pdata->keymapsize ||
-	    pdata->keymapsize > (pdata->rows * pdata->cols)) {
-		dev_err(&pdev->dev, "invalid keymapsize\n");
-		return -EINVAL;
-	}
-
-	bf54x_kpad = kzalloc(sizeof(struct bf54x_kpad), GFP_KERNEL);
-	if (!bf54x_kpad)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, bf54x_kpad);
-
-	/* Allocate memory for keymap followed by private LUT */
-	bf54x_kpad->keycode = kmalloc(pdata->keymapsize *
-					sizeof(unsigned short) * 2, GFP_KERNEL);
-	if (!bf54x_kpad->keycode) {
-		error = -ENOMEM;
-		goto out;
-	}
-
-	if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT ||
-	    !pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) {
-		dev_warn(&pdev->dev,
-			"invalid platform debounce/columndrive time\n");
-		bfin_write_KPAD_MSEL(0xFF0);	/* Default MSEL	*/
-	} else {
-		bfin_write_KPAD_MSEL(
-			((pdata->debounce_time / TIME_SCALE)
-						& DBON_SCALE) |
-			(((pdata->coldrive_time / TIME_SCALE) << 8)
-						& COLDRV_SCALE));
-
-	}
-
-	if (!pdata->keyup_test_interval)
-		bf54x_kpad->keyup_test_jiffies = msecs_to_jiffies(50);
-	else
-		bf54x_kpad->keyup_test_jiffies =
-			msecs_to_jiffies(pdata->keyup_test_interval);
-
-	if (peripheral_request_list((u16 *)&per_rows[MAX_RC - pdata->rows],
-				    DRV_NAME)) {
-		dev_err(&pdev->dev, "requesting peripherals failed\n");
-		error = -EFAULT;
-		goto out0;
-	}
-
-	if (peripheral_request_list((u16 *)&per_cols[MAX_RC - pdata->cols],
-				    DRV_NAME)) {
-		dev_err(&pdev->dev, "requesting peripherals failed\n");
-		error = -EFAULT;
-		goto out1;
-	}
-
-	bf54x_kpad->irq = platform_get_irq(pdev, 0);
-	if (bf54x_kpad->irq < 0) {
-		error = -ENODEV;
-		goto out2;
-	}
-
-	error = request_irq(bf54x_kpad->irq, bfin_kpad_isr,
-				0, DRV_NAME, pdev);
-	if (error) {
-		dev_err(&pdev->dev, "unable to claim irq %d\n",
-			bf54x_kpad->irq);
-		goto out2;
-	}
-
-	input = input_allocate_device();
-	if (!input) {
-		error = -ENOMEM;
-		goto out3;
-	}
-
-	bf54x_kpad->input = input;
-
-	input->name = pdev->name;
-	input->phys = "bf54x-keys/input0";
-	input->dev.parent = &pdev->dev;
-
-	input->id.bustype = BUS_HOST;
-	input->id.vendor = 0x0001;
-	input->id.product = 0x0001;
-	input->id.version = 0x0100;
-
-	input->keycodesize = sizeof(unsigned short);
-	input->keycodemax = pdata->keymapsize;
-	input->keycode = bf54x_kpad->keycode;
-
-	bfin_keycodecpy(bf54x_kpad->keycode, pdata->keymap, pdata->keymapsize);
-
-	/* setup input device */
-	__set_bit(EV_KEY, input->evbit);
-
-	if (pdata->repeat)
-		__set_bit(EV_REP, input->evbit);
-
-	for (i = 0; i < input->keycodemax; i++)
-		if (bf54x_kpad->keycode[i] <= KEY_MAX)
-			__set_bit(bf54x_kpad->keycode[i], input->keybit);
-	__clear_bit(KEY_RESERVED, input->keybit);
-
-	error = input_register_device(input);
-	if (error) {
-		dev_err(&pdev->dev, "unable to register input device\n");
-		goto out4;
-	}
-
-	/* Init Keypad Key Up/Release test timer */
-
-	timer_setup(&bf54x_kpad->timer, bfin_kpad_timer, 0);
-
-	bfin_write_KPAD_PRESCALE(bfin_kpad_get_prescale(TIME_SCALE));
-
-	bfin_write_KPAD_CTL((((pdata->cols - 1) << 13) & KPAD_COLEN) |
-				(((pdata->rows - 1) << 10) & KPAD_ROWEN) |
-				(2 & KPAD_IRQMODE));
-
-	bfin_write_KPAD_CTL(bfin_read_KPAD_CTL() | KPAD_EN);
-
-	device_init_wakeup(&pdev->dev, 1);
-
-	return 0;
-
-out4:
-	input_free_device(input);
-out3:
-	free_irq(bf54x_kpad->irq, pdev);
-out2:
-	peripheral_free_list((u16 *)&per_cols[MAX_RC - pdata->cols]);
-out1:
-	peripheral_free_list((u16 *)&per_rows[MAX_RC - pdata->rows]);
-out0:
-	kfree(bf54x_kpad->keycode);
-out:
-	kfree(bf54x_kpad);
-
-	return error;
-}
-
-static int bfin_kpad_remove(struct platform_device *pdev)
-{
-	struct bfin_kpad_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
-
-	del_timer_sync(&bf54x_kpad->timer);
-	free_irq(bf54x_kpad->irq, pdev);
-
-	input_unregister_device(bf54x_kpad->input);
-
-	peripheral_free_list((u16 *)&per_rows[MAX_RC - pdata->rows]);
-	peripheral_free_list((u16 *)&per_cols[MAX_RC - pdata->cols]);
-
-	kfree(bf54x_kpad->keycode);
-	kfree(bf54x_kpad);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int bfin_kpad_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
-
-	bf54x_kpad->kpad_msel = bfin_read_KPAD_MSEL();
-	bf54x_kpad->kpad_prescale = bfin_read_KPAD_PRESCALE();
-	bf54x_kpad->kpad_ctl = bfin_read_KPAD_CTL();
-
-	if (device_may_wakeup(&pdev->dev))
-		enable_irq_wake(bf54x_kpad->irq);
-
-	return 0;
-}
-
-static int bfin_kpad_resume(struct platform_device *pdev)
-{
-	struct bf54x_kpad *bf54x_kpad = platform_get_drvdata(pdev);
-
-	bfin_write_KPAD_MSEL(bf54x_kpad->kpad_msel);
-	bfin_write_KPAD_PRESCALE(bf54x_kpad->kpad_prescale);
-	bfin_write_KPAD_CTL(bf54x_kpad->kpad_ctl);
-
-	if (device_may_wakeup(&pdev->dev))
-		disable_irq_wake(bf54x_kpad->irq);
-
-	return 0;
-}
-#else
-# define bfin_kpad_suspend NULL
-# define bfin_kpad_resume  NULL
-#endif
-
-static struct platform_driver bfin_kpad_device_driver = {
-	.driver		= {
-		.name	= DRV_NAME,
-	},
-	.probe		= bfin_kpad_probe,
-	.remove		= bfin_kpad_remove,
-	.suspend	= bfin_kpad_suspend,
-	.resume		= bfin_kpad_resume,
-};
-module_platform_driver(bfin_kpad_device_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Michael Hennerich <hennerich@...ckfin.uclinux.org>");
-MODULE_DESCRIPTION("Keypad driver for BF54x Processors");
-MODULE_ALIAS("platform:bf54x-keys");
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 62a1312..e9770f5 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -655,15 +655,6 @@ config INPUT_DM355EVM
 	  To compile this driver as a module, choose M here: the
 	  module will be called dm355evm_keys.
 
-config INPUT_BFIN_ROTARY
-	tristate "Blackfin Rotary support"
-	depends on BF54x || BF52x
-	help
-	  Say Y here if you want to use the Blackfin Rotary.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin-rotary.
-
 config INPUT_WM831X_ON
 	tristate "WM831X ON pin"
 	depends on MFD_WM831X
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index a8f61af..eb9c6c3 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_INPUT_ARIZONA_HAPTICS)	+= arizona-haptics.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
 obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH)	+= atmel_captouch.o
-obj-$(CONFIG_INPUT_BFIN_ROTARY)		+= bfin_rotary.o
 obj-$(CONFIG_INPUT_BMA150)		+= bma150.o
 obj-$(CONFIG_INPUT_CM109)		+= cm109.o
 obj-$(CONFIG_INPUT_CMA3000)		+= cma3000_d0x.o
diff --git a/drivers/input/misc/bfin_rotary.c b/drivers/input/misc/bfin_rotary.c
deleted file mode 100644
index 799ce3d..0000000
--- a/drivers/input/misc/bfin_rotary.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * Rotary counter driver for Analog Devices Blackfin Processors
- *
- * Copyright 2008-2009 Analog Devices Inc.
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/slab.h>
-#include <linux/platform_data/bfin_rotary.h>
-
-#include <asm/portmux.h>
-
-#define CNT_CONFIG_OFF		0	/* CNT Config Offset */
-#define CNT_IMASK_OFF		4	/* CNT Interrupt Mask Offset */
-#define CNT_STATUS_OFF		8	/* CNT Status Offset */
-#define CNT_COMMAND_OFF		12	/* CNT Command Offset */
-#define CNT_DEBOUNCE_OFF	16	/* CNT Debounce Offset */
-#define CNT_COUNTER_OFF		20	/* CNT Counter Offset */
-#define CNT_MAX_OFF		24	/* CNT Maximum Count Offset */
-#define CNT_MIN_OFF		28	/* CNT Minimum Count Offset */
-
-struct bfin_rot {
-	struct input_dev *input;
-	void __iomem *base;
-	int irq;
-	unsigned int up_key;
-	unsigned int down_key;
-	unsigned int button_key;
-	unsigned int rel_code;
-
-	unsigned short mode;
-	unsigned short debounce;
-
-	unsigned short cnt_config;
-	unsigned short cnt_imask;
-	unsigned short cnt_debounce;
-};
-
-static void report_key_event(struct input_dev *input, int keycode)
-{
-	/* simulate a press-n-release */
-	input_report_key(input, keycode, 1);
-	input_sync(input);
-	input_report_key(input, keycode, 0);
-	input_sync(input);
-}
-
-static void report_rotary_event(struct bfin_rot *rotary, int delta)
-{
-	struct input_dev *input = rotary->input;
-
-	if (rotary->up_key) {
-		report_key_event(input,
-				 delta > 0 ? rotary->up_key : rotary->down_key);
-	} else {
-		input_report_rel(input, rotary->rel_code, delta);
-		input_sync(input);
-	}
-}
-
-static irqreturn_t bfin_rotary_isr(int irq, void *dev_id)
-{
-	struct bfin_rot *rotary = dev_id;
-	int delta;
-
-	switch (readw(rotary->base + CNT_STATUS_OFF)) {
-
-	case ICII:
-		break;
-
-	case UCII:
-	case DCII:
-		delta = readl(rotary->base + CNT_COUNTER_OFF);
-		if (delta)
-			report_rotary_event(rotary, delta);
-		break;
-
-	case CZMII:
-		report_key_event(rotary->input, rotary->button_key);
-		break;
-
-	default:
-		break;
-	}
-
-	writew(W1LCNT_ZERO, rotary->base + CNT_COMMAND_OFF); /* Clear COUNTER */
-	writew(-1, rotary->base + CNT_STATUS_OFF); /* Clear STATUS */
-
-	return IRQ_HANDLED;
-}
-
-static int bfin_rotary_open(struct input_dev *input)
-{
-	struct bfin_rot *rotary = input_get_drvdata(input);
-	unsigned short val;
-
-	if (rotary->mode & ROT_DEBE)
-		writew(rotary->debounce & DPRESCALE,
-			rotary->base + CNT_DEBOUNCE_OFF);
-
-	writew(rotary->mode & ~CNTE, rotary->base + CNT_CONFIG_OFF);
-
-	val = UCIE | DCIE;
-	if (rotary->button_key)
-		val |= CZMIE;
-	writew(val, rotary->base + CNT_IMASK_OFF);
-
-	writew(rotary->mode | CNTE, rotary->base + CNT_CONFIG_OFF);
-
-	return 0;
-}
-
-static void bfin_rotary_close(struct input_dev *input)
-{
-	struct bfin_rot *rotary = input_get_drvdata(input);
-
-	writew(0, rotary->base + CNT_CONFIG_OFF);
-	writew(0, rotary->base + CNT_IMASK_OFF);
-}
-
-static void bfin_rotary_free_action(void *data)
-{
-	peripheral_free_list(data);
-}
-
-static int bfin_rotary_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	const struct bfin_rotary_platform_data *pdata = dev_get_platdata(dev);
-	struct bfin_rot *rotary;
-	struct resource *res;
-	struct input_dev *input;
-	int error;
-
-	/* Basic validation */
-	if ((pdata->rotary_up_key && !pdata->rotary_down_key) ||
-	    (!pdata->rotary_up_key && pdata->rotary_down_key)) {
-		return -EINVAL;
-	}
-
-	if (pdata->pin_list) {
-		error = peripheral_request_list(pdata->pin_list,
-						dev_name(dev));
-		if (error) {
-			dev_err(dev, "requesting peripherals failed: %d\n",
-				error);
-			return error;
-		}
-
-		error = devm_add_action_or_reset(dev, bfin_rotary_free_action,
-						 pdata->pin_list);
-		if (error) {
-			dev_err(dev, "setting cleanup action failed: %d\n",
-				error);
-			return error;
-		}
-	}
-
-	rotary = devm_kzalloc(dev, sizeof(struct bfin_rot), GFP_KERNEL);
-	if (!rotary)
-		return -ENOMEM;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	rotary->base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(rotary->base))
-		return PTR_ERR(rotary->base);
-
-	input = devm_input_allocate_device(dev);
-	if (!input)
-		return -ENOMEM;
-
-	rotary->input = input;
-
-	rotary->up_key = pdata->rotary_up_key;
-	rotary->down_key = pdata->rotary_down_key;
-	rotary->button_key = pdata->rotary_button_key;
-	rotary->rel_code = pdata->rotary_rel_code;
-
-	rotary->mode = pdata->mode;
-	rotary->debounce = pdata->debounce;
-
-	input->name = pdev->name;
-	input->phys = "bfin-rotary/input0";
-	input->dev.parent = dev;
-
-	input_set_drvdata(input, rotary);
-
-	input->id.bustype = BUS_HOST;
-	input->id.vendor = 0x0001;
-	input->id.product = 0x0001;
-	input->id.version = 0x0100;
-
-	input->open = bfin_rotary_open;
-	input->close = bfin_rotary_close;
-
-	if (rotary->up_key) {
-		__set_bit(EV_KEY, input->evbit);
-		__set_bit(rotary->up_key, input->keybit);
-		__set_bit(rotary->down_key, input->keybit);
-	} else {
-		__set_bit(EV_REL, input->evbit);
-		__set_bit(rotary->rel_code, input->relbit);
-	}
-
-	if (rotary->button_key) {
-		__set_bit(EV_KEY, input->evbit);
-		__set_bit(rotary->button_key, input->keybit);
-	}
-
-	/* Quiesce the device before requesting irq */
-	bfin_rotary_close(input);
-
-	rotary->irq = platform_get_irq(pdev, 0);
-	if (rotary->irq < 0) {
-		dev_err(dev, "No rotary IRQ specified\n");
-		return -ENOENT;
-	}
-
-	error = devm_request_irq(dev, rotary->irq, bfin_rotary_isr,
-				 0, dev_name(dev), rotary);
-	if (error) {
-		dev_err(dev, "unable to claim irq %d; error %d\n",
-			rotary->irq, error);
-		return error;
-	}
-
-	error = input_register_device(input);
-	if (error) {
-		dev_err(dev, "unable to register input device (%d)\n", error);
-		return error;
-	}
-
-	platform_set_drvdata(pdev, rotary);
-	device_init_wakeup(dev, 1);
-
-	return 0;
-}
-
-static int __maybe_unused bfin_rotary_suspend(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct bfin_rot *rotary = platform_get_drvdata(pdev);
-
-	rotary->cnt_config = readw(rotary->base + CNT_CONFIG_OFF);
-	rotary->cnt_imask = readw(rotary->base + CNT_IMASK_OFF);
-	rotary->cnt_debounce = readw(rotary->base + CNT_DEBOUNCE_OFF);
-
-	if (device_may_wakeup(&pdev->dev))
-		enable_irq_wake(rotary->irq);
-
-	return 0;
-}
-
-static int __maybe_unused bfin_rotary_resume(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct bfin_rot *rotary = platform_get_drvdata(pdev);
-
-	writew(rotary->cnt_debounce, rotary->base + CNT_DEBOUNCE_OFF);
-	writew(rotary->cnt_imask, rotary->base + CNT_IMASK_OFF);
-	writew(rotary->cnt_config & ~CNTE, rotary->base + CNT_CONFIG_OFF);
-
-	if (device_may_wakeup(&pdev->dev))
-		disable_irq_wake(rotary->irq);
-
-	if (rotary->cnt_config & CNTE)
-		writew(rotary->cnt_config, rotary->base + CNT_CONFIG_OFF);
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(bfin_rotary_pm_ops,
-			 bfin_rotary_suspend, bfin_rotary_resume);
-
-static struct platform_driver bfin_rotary_device_driver = {
-	.probe		= bfin_rotary_probe,
-	.driver		= {
-		.name	= "bfin-rotary",
-		.pm	= &bfin_rotary_pm_ops,
-	},
-};
-module_platform_driver(bfin_rotary_device_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Michael Hennerich <hennerich@...ckfin.uclinux.org>");
-MODULE_DESCRIPTION("Rotary Counter driver for Blackfin Processors");
-MODULE_ALIAS("platform:bfin-rotary");
diff --git a/include/linux/platform_data/bfin_rotary.h b/include/linux/platform_data/bfin_rotary.h
deleted file mode 100644
index 9882937..0000000
--- a/include/linux/platform_data/bfin_rotary.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * board initialization should put one of these structures into platform_data
- * and place the bfin-rotary onto platform_bus named "bfin-rotary".
- *
- * Copyright 2008-2010 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef _BFIN_ROTARY_H
-#define _BFIN_ROTARY_H
-
-/* mode bitmasks */
-#define ROT_QUAD_ENC	CNTMODE_QUADENC	/* quadrature/grey code encoder mode */
-#define ROT_BIN_ENC	CNTMODE_BINENC	/* binary encoder mode */
-#define ROT_UD_CNT	CNTMODE_UDCNT	/* rotary counter mode */
-#define ROT_DIR_CNT	CNTMODE_DIRCNT	/* direction counter mode */
-
-#define ROT_DEBE	DEBE		/* Debounce Enable */
-
-#define ROT_CDGINV	CDGINV		/* CDG Pin Polarity Invert */
-#define ROT_CUDINV	CUDINV		/* CUD Pin Polarity Invert */
-#define ROT_CZMINV	CZMINV		/* CZM Pin Polarity Invert */
-
-struct bfin_rotary_platform_data {
-	/* set rotary UP KEY_### or BTN_### in case you prefer
-	 * bfin-rotary to send EV_KEY otherwise set 0
-	 */
-	unsigned int rotary_up_key;
-	/* set rotary DOWN KEY_### or BTN_### in case you prefer
-	 * bfin-rotary to send EV_KEY otherwise set 0
-	 */
-	unsigned int rotary_down_key;
-	/* set rotary BUTTON KEY_### or BTN_### */
-	unsigned int rotary_button_key;
-	/* set rotary Relative Axis REL_### in case you prefer
-	 * bfin-rotary to send EV_REL otherwise set 0
-	 */
-	unsigned int rotary_rel_code;
-	unsigned short debounce;	/* 0..17 */
-	unsigned short mode;
-	unsigned short pm_wakeup;
-	unsigned short *pin_list;
-};
-
-/* CNT_CONFIG bitmasks */
-#define CNTE		(1 << 0)	/* Counter Enable */
-#define DEBE		(1 << 1)	/* Debounce Enable */
-#define CDGINV		(1 << 4)	/* CDG Pin Polarity Invert */
-#define CUDINV		(1 << 5)	/* CUD Pin Polarity Invert */
-#define CZMINV		(1 << 6)	/* CZM Pin Polarity Invert */
-#define CNTMODE_SHIFT	8
-#define CNTMODE		(0x7 << CNTMODE_SHIFT)	/* Counter Operating Mode */
-#define ZMZC		(1 << 1)	/* CZM Zeroes Counter Enable */
-#define BNDMODE_SHIFT	12
-#define BNDMODE		(0x3 << BNDMODE_SHIFT)	/* Boundary register Mode */
-#define INPDIS		(1 << 15)	/* CUG and CDG Input Disable */
-
-#define CNTMODE_QUADENC	(0 << CNTMODE_SHIFT)	/* quadrature encoder mode */
-#define CNTMODE_BINENC	(1 << CNTMODE_SHIFT)	/* binary encoder mode */
-#define CNTMODE_UDCNT	(2 << CNTMODE_SHIFT)	/* up/down counter mode */
-#define CNTMODE_DIRCNT	(4 << CNTMODE_SHIFT)	/* direction counter mode */
-#define CNTMODE_DIRTMR	(5 << CNTMODE_SHIFT)	/* direction timer mode */
-
-#define BNDMODE_COMP	(0 << BNDMODE_SHIFT)	/* boundary compare mode */
-#define BNDMODE_ZERO	(1 << BNDMODE_SHIFT)	/* boundary compare and zero mode */
-#define BNDMODE_CAPT	(2 << BNDMODE_SHIFT)	/* boundary capture mode */
-#define BNDMODE_AEXT	(3 << BNDMODE_SHIFT)	/* boundary auto-extend mode */
-
-/* CNT_IMASK bitmasks */
-#define ICIE		(1 << 0)	/* Illegal Gray/Binary Code Interrupt Enable */
-#define UCIE		(1 << 1)	/* Up count Interrupt Enable */
-#define DCIE		(1 << 2)	/* Down count Interrupt Enable */
-#define MINCIE		(1 << 3)	/* Min Count Interrupt Enable */
-#define MAXCIE		(1 << 4)	/* Max Count Interrupt Enable */
-#define COV31IE		(1 << 5)	/* Bit 31 Overflow Interrupt Enable */
-#define COV15IE		(1 << 6)	/* Bit 15 Overflow Interrupt Enable */
-#define CZEROIE		(1 << 7)	/* Count to Zero Interrupt Enable */
-#define CZMIE		(1 << 8)	/* CZM Pin Interrupt Enable */
-#define CZMEIE		(1 << 9)	/* CZM Error Interrupt Enable */
-#define CZMZIE		(1 << 10)	/* CZM Zeroes Counter Interrupt Enable */
-
-/* CNT_STATUS bitmasks */
-#define ICII		(1 << 0)	/* Illegal Gray/Binary Code Interrupt Identifier */
-#define UCII		(1 << 1)	/* Up count Interrupt Identifier */
-#define DCII		(1 << 2)	/* Down count Interrupt Identifier */
-#define MINCII		(1 << 3)	/* Min Count Interrupt Identifier */
-#define MAXCII		(1 << 4)	/* Max Count Interrupt Identifier */
-#define COV31II		(1 << 5)	/* Bit 31 Overflow Interrupt Identifier */
-#define COV15II		(1 << 6)	/* Bit 15 Overflow Interrupt Identifier */
-#define CZEROII		(1 << 7)	/* Count to Zero Interrupt Identifier */
-#define CZMII		(1 << 8)	/* CZM Pin Interrupt Identifier */
-#define CZMEII		(1 << 9)	/* CZM Error Interrupt Identifier */
-#define CZMZII		(1 << 10)	/* CZM Zeroes Counter Interrupt Identifier */
-
-/* CNT_COMMAND bitmasks */
-#define W1LCNT		0xf		/* Load Counter Register */
-#define W1LMIN		0xf0		/* Load Min Register */
-#define W1LMAX		0xf00		/* Load Max Register */
-#define W1ZMONCE	(1 << 12)	/* Enable CZM Clear Counter Once */
-
-#define W1LCNT_ZERO	(1 << 0)	/* write 1 to load CNT_COUNTER with zero */
-#define W1LCNT_MIN	(1 << 2)	/* write 1 to load CNT_COUNTER from CNT_MIN */
-#define W1LCNT_MAX	(1 << 3)	/* write 1 to load CNT_COUNTER from CNT_MAX */
-
-#define W1LMIN_ZERO	(1 << 4)	/* write 1 to load CNT_MIN with zero */
-#define W1LMIN_CNT	(1 << 5)	/* write 1 to load CNT_MIN from CNT_COUNTER */
-#define W1LMIN_MAX	(1 << 7)	/* write 1 to load CNT_MIN from CNT_MAX */
-
-#define W1LMAX_ZERO	(1 << 8)	/* write 1 to load CNT_MAX with zero */
-#define W1LMAX_CNT	(1 << 9)	/* write 1 to load CNT_MAX from CNT_COUNTER */
-#define W1LMAX_MIN	(1 << 10)	/* write 1 to load CNT_MAX from CNT_MIN */
-
-/* CNT_DEBOUNCE bitmasks */
-#define DPRESCALE	0xf		/* Load Counter Register */
-
-#endif
-- 
2.7.4

Powered by blists - more mailing lists