linux-kernel - [PATCH 4.15 127/128] dmaengine: qcom

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180316152342.757885357@linuxfoundation.org>
Date:   Fri, 16 Mar 2018 16:24:28 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Sinan Kaya <okaya@...eaurora.org>,
        Vinod Koul <vinod.koul@...el.com>,
        Sasha Levin <alexander.levin@...rosoft.com>
Subject: [PATCH 4.15 127/128] dmaengine: qcom_hidma: check pending interrupts

4.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sinan Kaya <okaya@...eaurora.org>


[ Upstream commit 38680bc6b1e3592bc9e18adc1d6e259667df27ce ]

Driver is missing the interrupts if two requests are queued up at the same
time as the interrupt handler is servicing a request that was just
delivered.

The ISR clears the interrupt at the end but it could be clearing the
interrupt for an outstanding event. Therefore, second interrupt never
arrives.

Clear the interrupt first and then check for completions.

Also, make sure that request start and interrupt clear do not overlap in
time by using a spinlock.

Signed-off-by: Sinan Kaya <okaya@...eaurora.org>
Signed-off-by: Vinod Koul <vinod.koul@...el.com>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/dma/qcom/hidma_ll.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/dma/qcom/hidma_ll.c
+++ b/drivers/dma/qcom/hidma_ll.c
@@ -393,6 +393,8 @@ static int hidma_ll_reset(struct hidma_l
  */
 static void hidma_ll_int_handler_internal(struct hidma_lldev *lldev, int cause)
 {
+	unsigned long irqflags;
+
 	if (cause & HIDMA_ERR_INT_MASK) {
 		dev_err(lldev->dev, "error 0x%x, disabling...\n",
 				cause);
@@ -410,6 +412,10 @@ static void hidma_ll_int_handler_interna
 		return;
 	}
 
+	spin_lock_irqsave(&lldev->lock, irqflags);
+	writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
+	spin_unlock_irqrestore(&lldev->lock, irqflags);
+
 	/*
 	 * Fine tuned for this HW...
 	 *
@@ -421,9 +427,6 @@ static void hidma_ll_int_handler_interna
 	 * Try to consume as many EVREs as possible.
 	 */
 	hidma_handle_tre_completion(lldev);
-
-	/* We consumed TREs or there are pending TREs or EVREs. */
-	writel_relaxed(cause, lldev->evca + HIDMA_EVCA_IRQ_CLR_REG);
 }
 
 irqreturn_t hidma_ll_inthandler(int chirq, void *arg)