[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180317232901.14129-2-paul@crapouillou.net>
Date: Sun, 18 Mar 2018 00:28:54 +0100
From: Paul Cercueil <paul@...pouillou.net>
To: Thomas Gleixner <tglx@...utronix.de>,
Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <marc.zyngier@....com>,
Lee Jones <lee.jones@...aro.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Ralf Baechle <ralf@...ux-mips.org>,
Rob Herring <robh+dt@...nel.org>,
Jonathan Corbet <corbet@....net>,
Mark Rutland <mark.rutland@....com>
Cc: James Hogan <jhogan@...nel.org>,
Maarten ter Huurne <maarten@...ewalker.org>,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-mips@...ux-mips.org,
linux-doc@...r.kernel.org, Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH v4 1/8] mfd: syscon: Add ingenic-tcu.h header
This header contains macros for the registers that are present in the
regmap shared by all the drivers related to the TCU (Timer Counter Unit)
of the Ingenic JZ47xx SoCs.
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
Acked-by: Lee Jones <lee.jones@...aro.org>
---
include/linux/mfd/syscon/ingenic-tcu.h | 54 ++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
create mode 100644 include/linux/mfd/syscon/ingenic-tcu.h
v2: Use SPDX identifier for the license
v3: - Use macros instead of enum
- Add 'TCU_' at the beginning of each macro
- Remove useless include <linux/regmap.h>
v4: No change
diff --git a/include/linux/mfd/syscon/ingenic-tcu.h b/include/linux/mfd/syscon/ingenic-tcu.h
new file mode 100644
index 000000000000..96dd59f7c3b2
--- /dev/null
+++ b/include/linux/mfd/syscon/ingenic-tcu.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Header file for the Ingenic JZ47xx TCU driver
+ */
+#ifndef __LINUX_CLK_INGENIC_TCU_H_
+#define __LINUX_CLK_INGENIC_TCU_H_
+
+#include <linux/bitops.h>
+
+#define TCU_REG_WDT_TDR 0x00
+#define TCU_REG_WDT_TCER 0x04
+#define TCU_REG_WDT_TCNT 0x08
+#define TCU_REG_WDT_TCSR 0x0c
+#define TCU_REG_TER 0x10
+#define TCU_REG_TESR 0x14
+#define TCU_REG_TECR 0x18
+#define TCU_REG_TSR 0x1c
+#define TCU_REG_TFR 0x20
+#define TCU_REG_TFSR 0x24
+#define TCU_REG_TFCR 0x28
+#define TCU_REG_TSSR 0x2c
+#define TCU_REG_TMR 0x30
+#define TCU_REG_TMSR 0x34
+#define TCU_REG_TMCR 0x38
+#define TCU_REG_TSCR 0x3c
+#define TCU_REG_TDFR0 0x40
+#define TCU_REG_TDHR0 0x44
+#define TCU_REG_TCNT0 0x48
+#define TCU_REG_TCSR0 0x4c
+#define TCU_REG_OST_DR 0xe0
+#define TCU_REG_OST_CNTL 0xe4
+#define TCU_REG_OST_CNTH 0xe8
+#define TCU_REG_OST_TCSR 0xec
+#define TCU_REG_TSTR 0xf0
+#define TCU_REG_TSTSR 0xf4
+#define TCU_REG_TSTCR 0xf8
+#define TCU_REG_OST_CNTHBUF 0xfc
+
+#define TCU_TCSR_RESERVED_BITS 0x3f
+#define TCU_TCSR_PARENT_CLOCK_MASK 0x07
+#define TCU_TCSR_PRESCALE_LSB 3
+#define TCU_TCSR_PRESCALE_MASK 0x38
+
+#define TCU_TCSR_PWM_SD BIT(9) /* 0: Shutdown abruptly 1: gracefully */
+#define TCU_TCSR_PWM_INITL_HIGH BIT(8) /* Sets the initial output level */
+#define TCU_TCSR_PWM_EN BIT(7) /* PWM pin output enable */
+
+#define TCU_CHANNEL_STRIDE 0x10
+#define TCU_REG_TDFRc(c) (TCU_REG_TDFR0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TDHRc(c) (TCU_REG_TDHR0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TCNTc(c) (TCU_REG_TCNT0 + ((c) * TCU_CHANNEL_STRIDE))
+#define TCU_REG_TCSRc(c) (TCU_REG_TCSR0 + ((c) * TCU_CHANNEL_STRIDE))
+
+#endif /* __LINUX_CLK_INGENIC_TCU_H_ */
--
2.11.0
Powered by blists - more mailing lists