[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180319155742.13731-226-alexander.levin@microsoft.com>
Date: Mon, 19 Mar 2018 16:02:21 +0000
From: Sasha Levin <Alexander.Levin@...rosoft.com>
To: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"stable@...r.kernel.org" <stable@...r.kernel.org>
CC: Geert Uytterhoeven <geert+renesas@...der.be>,
Simon Horman <horms+renesas@...ge.net.au>,
Sasha Levin <Alexander.Levin@...rosoft.com>
Subject: [PATCH AUTOSEL for 4.9 226/281] ARM: dts: armadillo800eva: Split LCD
mux and gpio
From: Geert Uytterhoeven <geert+renesas@...der.be>
[ Upstream commit 13132b3f44d3600983aceb7e9920b8ebb55a7cf8 ]
Configuration of the lcd0 pinmux group and GPIO hog for the external
GPIO mux are done using a single device node, causing the "output-high"
property to be applied to both. This will fail for the pinmux group,
but doesn't cause any harm, as the failure is ignored silently.
However, after "pinctrl: sh-pfc: propagate errors on group config", the
failure will become fatal, leading to a broken display:
sh-pfc e6050000.pin-controller: pin_config_group_set op failed for group 102
sh-pfc e6050000.pin-controller: Error applying setting, reverse things back
sh-pfc e6050000.pin-controller: failed to select default state
Move the GPIO hog to its own node to fix this.
Fixes: ffd2f9a5afb730b9 ("ARM: shmobile: armadillo800eva dts: Add pinctrl and gpio-hog for lcdc0")
Signed-off-by: Geert Uytterhoeven <geert+renesas@...der.be>
Acked-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Signed-off-by: Simon Horman <horms+renesas@...ge.net.au>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
---
arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 7885075428bb..1788e186a512 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -266,7 +266,9 @@
lcd0_pins: lcd0 {
groups = "lcd0_data24_0", "lcd0_lclk_1", "lcd0_sync";
function = "lcd0";
+ };
+ lcd0_mux {
/* DBGMD/LCDC0/FSIA MUX */
gpio-hog;
gpios = <176 0>;
--
2.14.1
Powered by blists - more mailing lists