[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180319155742.13731-186-alexander.levin@microsoft.com>
Date: Mon, 19 Mar 2018 16:01:33 +0000
From: Sasha Levin <Alexander.Levin@...rosoft.com>
To: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"stable@...r.kernel.org" <stable@...r.kernel.org>
CC: Leonard Crestez <leonard.crestez@....com>,
"David S . Miller" <davem@...emloft.net>,
Sasha Levin <Alexander.Levin@...rosoft.com>
Subject: [PATCH AUTOSEL for 4.9 186/281] net: phy: micrel: Restore led_mode
and clk_sel on resume
From: Leonard Crestez <leonard.crestez@....com>
[ Upstream commit 79e498a9c7da0737829ff864aae44df434105676 ]
These bits seem to be lost after a suspend/resume cycle so just set them
again. Do this by splitting the handling of these bits into a function
that is also called on resume.
This patch fixes ethernet suspend/resume on imx6ul-14x14-evk boards.
Signed-off-by: Leonard Crestez <leonard.crestez@....com>
Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
---
drivers/net/phy/micrel.c | 42 ++++++++++++++++++++++++++++--------------
1 file changed, 28 insertions(+), 14 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 2032a6de026b..4da73e2c37cf 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -268,23 +268,12 @@ static int kszphy_nand_tree_disable(struct phy_device *phydev)
return ret;
}
-static int kszphy_config_init(struct phy_device *phydev)
+/* Some config bits need to be set again on resume, handle them here. */
+static int kszphy_config_reset(struct phy_device *phydev)
{
struct kszphy_priv *priv = phydev->priv;
- const struct kszphy_type *type;
int ret;
- if (!priv)
- return 0;
-
- type = priv->type;
-
- if (type->has_broadcast_disable)
- kszphy_broadcast_disable(phydev);
-
- if (type->has_nand_tree_disable)
- kszphy_nand_tree_disable(phydev);
-
if (priv->rmii_ref_clk_sel) {
ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
if (ret) {
@@ -295,7 +284,7 @@ static int kszphy_config_init(struct phy_device *phydev)
}
if (priv->led_mode >= 0)
- kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
+ kszphy_setup_led(phydev, priv->type->led_mode_reg, priv->led_mode);
if (phy_interrupt_is_valid(phydev)) {
int ctl = phy_read(phydev, MII_BMCR);
@@ -311,6 +300,25 @@ static int kszphy_config_init(struct phy_device *phydev)
return 0;
}
+static int kszphy_config_init(struct phy_device *phydev)
+{
+ struct kszphy_priv *priv = phydev->priv;
+ const struct kszphy_type *type;
+
+ if (!priv)
+ return 0;
+
+ type = priv->type;
+
+ if (type->has_broadcast_disable)
+ kszphy_broadcast_disable(phydev);
+
+ if (type->has_nand_tree_disable)
+ kszphy_nand_tree_disable(phydev);
+
+ return kszphy_config_reset(phydev);
+}
+
static int ksz8041_config_init(struct phy_device *phydev)
{
struct device_node *of_node = phydev->mdio.dev.of_node;
@@ -715,8 +723,14 @@ static int kszphy_suspend(struct phy_device *phydev)
static int kszphy_resume(struct phy_device *phydev)
{
+ int ret;
+
genphy_resume(phydev);
+ ret = kszphy_config_reset(phydev);
+ if (ret)
+ return ret;
+
/* Enable PHY Interrupts */
if (phy_interrupt_is_valid(phydev)) {
phydev->interrupts = PHY_INTERRUPT_ENABLED;
--
2.14.1
Powered by blists - more mailing lists