[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180319180737.522895594@linuxfoundation.org>
Date: Mon, 19 Mar 2018 19:08:44 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Roger Quadros <rogerq@...com>,
Manu Gautam <mgautam@...eaurora.org>,
Felipe Balbi <felipe.balbi@...ux.intel.com>
Subject: [PATCH 4.15 46/52] usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode
4.15-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manu Gautam <mgautam@...eaurora.org>
commit c4a5153e87fdf6805f63ff57556260e2554155a5 upstream.
Commit 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during
host bus-suspend/resume") updated suspend/resume routines to not
power_off and reinit PHYs/core for host mode.
It broke platforms that rely on DWC3 core to power_off PHYs to
enter low power state on system suspend.
Perform dwc3_core_exit/init only during host mode system_suspend/
resume to addresses power regression from above mentioned patch
and also allow USB session to stay connected across
runtime_suspend/resume in host mode. While at it also replace
existing checks for HOST only dr_mode with current_dr_role to
have similar core driver behavior for both Host-only and DRD+Host
configurations.
Fixes: 689bf72c6e0d ("usb: dwc3: Don't reinitialize core during host bus-suspend/resume")
Reviewed-by: Roger Quadros <rogerq@...com>
Signed-off-by: Manu Gautam <mgautam@...eaurora.org>
Signed-off-by: Felipe Balbi <felipe.balbi@...ux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/usb/dwc3/core.c | 36 ++++++++++++++++++++++--------------
1 file changed, 22 insertions(+), 14 deletions(-)
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -100,6 +100,8 @@ static void dwc3_set_prtcap(struct dwc3
reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
reg |= DWC3_GCTL_PRTCAPDIR(mode);
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+ dwc->current_dr_role = mode;
}
static void __dwc3_set_mode(struct work_struct *work)
@@ -133,8 +135,6 @@ static void __dwc3_set_mode(struct work_
dwc3_set_prtcap(dwc, dwc->desired_dr_role);
- dwc->current_dr_role = dwc->desired_dr_role;
-
spin_unlock_irqrestore(&dwc->lock, flags);
switch (dwc->desired_dr_role) {
@@ -218,7 +218,7 @@ static int dwc3_core_soft_reset(struct d
* XHCI driver will reset the host block. If dwc3 was configured for
* host-only mode, then we can return early.
*/
- if (dwc->dr_mode == USB_DR_MODE_HOST)
+ if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
return 0;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -915,7 +915,6 @@ static int dwc3_core_init_mode(struct dw
switch (dwc->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
- dwc->current_dr_role = DWC3_GCTL_PRTCAP_DEVICE;
dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
if (dwc->usb2_phy)
@@ -931,7 +930,6 @@ static int dwc3_core_init_mode(struct dw
}
break;
case USB_DR_MODE_HOST:
- dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST;
dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
if (dwc->usb2_phy)
@@ -1279,7 +1277,7 @@ static int dwc3_remove(struct platform_d
}
#ifdef CONFIG_PM
-static int dwc3_suspend_common(struct dwc3 *dwc)
+static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
{
unsigned long flags;
@@ -1291,6 +1289,10 @@ static int dwc3_suspend_common(struct dw
dwc3_core_exit(dwc);
break;
case DWC3_GCTL_PRTCAP_HOST:
+ /* do nothing during host runtime_suspend */
+ if (!PMSG_IS_AUTO(msg))
+ dwc3_core_exit(dwc);
+ break;
default:
/* do nothing */
break;
@@ -1299,7 +1301,7 @@ static int dwc3_suspend_common(struct dw
return 0;
}
-static int dwc3_resume_common(struct dwc3 *dwc)
+static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
{
unsigned long flags;
int ret;
@@ -1315,6 +1317,13 @@ static int dwc3_resume_common(struct dwc
spin_unlock_irqrestore(&dwc->lock, flags);
break;
case DWC3_GCTL_PRTCAP_HOST:
+ /* nothing to do on host runtime_resume */
+ if (!PMSG_IS_AUTO(msg)) {
+ ret = dwc3_core_init(dwc);
+ if (ret)
+ return ret;
+ }
+ break;
default:
/* do nothing */
break;
@@ -1326,12 +1335,11 @@ static int dwc3_resume_common(struct dwc
static int dwc3_runtime_checks(struct dwc3 *dwc)
{
switch (dwc->current_dr_role) {
- case USB_DR_MODE_PERIPHERAL:
- case USB_DR_MODE_OTG:
+ case DWC3_GCTL_PRTCAP_DEVICE:
if (dwc->connected)
return -EBUSY;
break;
- case USB_DR_MODE_HOST:
+ case DWC3_GCTL_PRTCAP_HOST:
default:
/* do nothing */
break;
@@ -1348,7 +1356,7 @@ static int dwc3_runtime_suspend(struct d
if (dwc3_runtime_checks(dwc))
return -EBUSY;
- ret = dwc3_suspend_common(dwc);
+ ret = dwc3_suspend_common(dwc, PMSG_AUTO_SUSPEND);
if (ret)
return ret;
@@ -1364,7 +1372,7 @@ static int dwc3_runtime_resume(struct de
device_init_wakeup(dev, false);
- ret = dwc3_resume_common(dwc);
+ ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME);
if (ret)
return ret;
@@ -1411,7 +1419,7 @@ static int dwc3_suspend(struct device *d
struct dwc3 *dwc = dev_get_drvdata(dev);
int ret;
- ret = dwc3_suspend_common(dwc);
+ ret = dwc3_suspend_common(dwc, PMSG_SUSPEND);
if (ret)
return ret;
@@ -1427,7 +1435,7 @@ static int dwc3_resume(struct device *de
pinctrl_pm_select_default_state(dev);
- ret = dwc3_resume_common(dwc);
+ ret = dwc3_resume_common(dwc, PMSG_RESUME);
if (ret)
return ret;
Powered by blists - more mailing lists