| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1521444351-29550-3-git-send-email-gabriel.fernandez@st.com>
Date: Mon, 19 Mar 2018 08:25:51 +0100
From: <gabriel.fernandez@...com>
To: Philipp Zabel <p.zabel@...gutronix.de>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
<gabriel.fernandez@...com>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<gabriel.fernandez.st@...il.com>,
Loic PALLARDY <loic.pallardy@...com>,
benjamin GAIGNARD <benjamin.gaignard@...com>,
Michael Turquette <mturquette@...libre.com>,
<sboyd@...nel.org>, Gabriel Fernandez <gabriel.fernandez@...com>
Subject: [PATCH v3 2/2] reset: stm32mp1: Enable stm32mp1 reset driver
From: Gabriel Fernandez <gabriel.fernandez@...com>
stm32mp1 RCC IP 1 has a reset SET register and a reset CLEAR register.
Writing '0' on reset SET register has no effect
Writing '1' on reset SET register
activates the reset of the corresponding peripheral
Writing '0' on reset CLEAR register has no effect
Writing '1' on reset CLEAR register
releases the reset of the corresponding peripheral
See Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.txt
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@...com>
---
drivers/reset/Kconfig | 6 +++
drivers/reset/Makefile | 1 +
drivers/reset/reset-stm32mp1.c | 115 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 122 insertions(+)
create mode 100644 drivers/reset/reset-stm32mp1.c
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 1efbc6c..c0b292b 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -97,6 +97,12 @@ config RESET_SIMPLE
- Allwinner SoCs
- ZTE's zx2967 family
+config RESET_STM32MP157
+ bool "STM32MP157 Reset Driver" if COMPILE_TEST
+ default MACH_STM32MP157
+ help
+ This enables the RCC reset controller driver for STM32 MPUs.
+
config RESET_SUNXI
bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI
default ARCH_SUNXI
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 132c24f..c1261dc 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
+obj-$(CONFIG_RESET_STM32MP157) += reset-stm32mp1.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
diff --git a/drivers/reset/reset-stm32mp1.c b/drivers/reset/reset-stm32mp1.c
new file mode 100644
index 0000000..b221a28
--- /dev/null
+++ b/drivers/reset/reset-stm32mp1.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Gabriel Fernandez <gabriel.fernandez@...com> for STMicroelectronics.
+ */
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+
+#define CLR_OFFSET 0x4
+
+struct stm32_reset_data {
+ struct reset_controller_dev rcdev;
+ void __iomem *membase;
+};
+
+static inline struct stm32_reset_data *
+to_stm32_reset_data(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct stm32_reset_data, rcdev);
+}
+
+static int stm32_reset_update(struct reset_controller_dev *rcdev,
+ unsigned long id, bool assert)
+{
+ struct stm32_reset_data *data = to_stm32_reset_data(rcdev);
+ int reg_width = sizeof(u32);
+ int bank = id / (reg_width * BITS_PER_BYTE);
+ int offset = id % (reg_width * BITS_PER_BYTE);
+ void __iomem *addr;
+
+ addr = data->membase + (bank * reg_width);
+ if (!assert)
+ addr += CLR_OFFSET;
+
+ writel(BIT(offset), addr);
+
+ return 0;
+}
+
+static int stm32_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return stm32_reset_update(rcdev, id, true);
+}
+
+static int stm32_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ return stm32_reset_update(rcdev, id, false);
+}
+
+static int stm32_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct stm32_reset_data *data = to_stm32_reset_data(rcdev);
+ int reg_width = sizeof(u32);
+ int bank = id / (reg_width * BITS_PER_BYTE);
+ int offset = id % (reg_width * BITS_PER_BYTE);
+ u32 reg;
+
+ reg = readl(data->membase + (bank * reg_width));
+
+ return !!(reg & BIT(offset));
+}
+
+static const struct reset_control_ops stm32_reset_ops = {
+ .assert = stm32_reset_assert,
+ .deassert = stm32_reset_deassert,
+ .status = stm32_reset_status,
+};
+
+static const struct of_device_id stm32_reset_dt_ids[] = {
+ { .compatible = "st,stm32mp1-rcc"},
+ { /* sentinel */ },
+};
+
+static int stm32_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct stm32_reset_data *data;
+ void __iomem *membase;
+ struct resource *res;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ membase = devm_ioremap_resource(dev, res);
+ if (IS_ERR(membase))
+ return PTR_ERR(membase);
+
+ data->membase = membase;
+ data->rcdev.owner = THIS_MODULE;
+ data->rcdev.nr_resets = resource_size(res) * BITS_PER_BYTE;
+ data->rcdev.ops = &stm32_reset_ops;
+ data->rcdev.of_node = dev->of_node;
+
+ return devm_reset_controller_register(dev, &data->rcdev);
+}
+
+static struct platform_driver stm32_reset_driver = {
+ .probe = stm32_reset_probe,
+ .driver = {
+ .name = "stm32mp1-reset",
+ .of_match_table = stm32_reset_dt_ids,
+ },
+};
+
+builtin_platform_driver(stm32_reset_driver);
--
1.9.1
Powered by blists - more mailing lists