linux-kernel - [PATCH AUTOSEL for 4.14 84/97] sdhci: Advertise 2.0v supply on SDIO host controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180319155411.12348-84-alexander.levin@microsoft.com>
Date:   Mon, 19 Mar 2018 15:56:22 +0000
From:   Sasha Levin <Alexander.Levin@...rosoft.com>
To:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "stable@...r.kernel.org" <stable@...r.kernel.org>
CC:     Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Sasha Levin <Alexander.Levin@...rosoft.com>
Subject: [PATCH AUTOSEL for 4.14 84/97] sdhci: Advertise 2.0v supply on SDIO
 host controller

From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>

[ Upstream commit 2a609abe71ca59e4bd7139e161eaca2144ae6f2e ]

On Intel Edison the Broadcom Wi-Fi card, which is connected to SDIO,
requires 2.0v, while the host, according to Intel Merrifield TRM,
supports 1.8v supply only.

The card announces itself as

  mmc2: new ultra high speed DDR50 SDIO card at address 0001

Introduce a custom OCR mask for SDIO host controller on Intel Merrifield
and add a special case to sdhci_set_power_noreg() to override 2.0v supply
by enforcing 1.8v power choice.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@...el.com>
Signed-off-by: Ulf Hansson <ulf.hansson@...aro.org>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
---
 drivers/mmc/host/sdhci-pci-core.c | 2 ++
 drivers/mmc/host/sdhci.c          | 7 +++++++
 2 files changed, 9 insertions(+)

diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index 070f5da06fd2..5bedf4b7f0f7 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -806,6 +806,8 @@ static int intel_mrfld_mmc_probe_slot(struct sdhci_pci_slot *slot)
 		slot->host->quirks2 |= SDHCI_QUIRK2_NO_1_8_V;
 		break;
 	case INTEL_MRFLD_SDIO:
+		/* Advertise 2.0v for compatibility with the SDIO card's OCR */
+		slot->host->ocr_mask = MMC_VDD_20_21 | MMC_VDD_165_195;
 		slot->host->mmc->caps |= MMC_CAP_NONREMOVABLE |
 					 MMC_CAP_POWER_OFF_CARD;
 		break;
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 90cc1977b792..d35deb79965d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1470,6 +1470,13 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
 	if (mode != MMC_POWER_OFF) {
 		switch (1 << vdd) {
 		case MMC_VDD_165_195:
+		/*
+		 * Without a regulator, SDHCI does not support 2.0v
+		 * so we only get here if the driver deliberately
+		 * added the 2.0v range to ocr_avail. Map it to 1.8v
+		 * for the purpose of turning on the power.
+		 */
+		case MMC_VDD_20_21:
 			pwr = SDHCI_POWER_180;
 			break;
 		case MMC_VDD_29_30:
-- 
2.14.1