linux-kernel - [PATCH AUTOSEL for 4.4 013/167] net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180319160513.16384-13-alexander.levin@microsoft.com>
Date:   Mon, 19 Mar 2018 16:05:36 +0000
From:   Sasha Levin <Alexander.Levin@...rosoft.com>
To:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "stable@...r.kernel.org" <stable@...r.kernel.org>
CC:     Grygorii Strashko <grygorii.strashko@...com>,
        Schuyler Patton <spatton@...com>,
        "David S . Miller" <davem@...emloft.net>,
        Sasha Levin <Alexander.Levin@...rosoft.com>
Subject: [PATCH AUTOSEL for 4.4 013/167] net: ethernet: ti: cpsw: adjust cpsw
 fifos depth for fullduplex flow control

From: Grygorii Strashko <grygorii.strashko@...com>

[ Upstream commit 48f5bccc60675f8426a6159935e8636a1fd89f56 ]

When users set flow control using ethtool the bits are set properly in the
CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n
Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size
reset value. When receive flow control is enabled on a port, the port's
associated FIFO block allocation must be adjusted. The port RX allocation
must increase to accommodate the flow control runout. The TRM recommends
numbers of 5 or 6.

Hence, apply required Port FIFO configuration to
Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during
interface initialization.

Cc: Schuyler Patton <spatton@...com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <alexander.levin@...rosoft.com>
---
 drivers/net/ethernet/ti/cpsw.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index fc958067d10a..6bf3f82e8a4a 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -280,6 +280,10 @@ struct cpsw_ss_regs {
 /* Bit definitions for the CPSW1_TS_SEQ_LTYPE register */
 #define CPSW_V1_SEQ_ID_OFS_SHIFT	16
 
+#define CPSW_MAX_BLKS_TX		15
+#define CPSW_MAX_BLKS_TX_SHIFT		4
+#define CPSW_MAX_BLKS_RX		5
+
 struct cpsw_host_regs {
 	u32	max_blks;
 	u32	blk_cnt;
@@ -1126,11 +1130,23 @@ static void cpsw_slave_open(struct cpsw_slave *slave, struct cpsw_priv *priv)
 	switch (priv->version) {
 	case CPSW_VERSION_1:
 		slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP);
+		/* Increase RX FIFO size to 5 for supporting fullduplex
+		 * flow control mode
+		 */
+		slave_write(slave,
+			    (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) |
+			    CPSW_MAX_BLKS_RX, CPSW1_MAX_BLKS);
 		break;
 	case CPSW_VERSION_2:
 	case CPSW_VERSION_3:
 	case CPSW_VERSION_4:
 		slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP);
+		/* Increase RX FIFO size to 5 for supporting fullduplex
+		 * flow control mode
+		 */
+		slave_write(slave,
+			    (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) |
+			    CPSW_MAX_BLKS_RX, CPSW2_MAX_BLKS);
 		break;
 	}
 
-- 
2.14.1